PX-3 Junction BoxThis waterproof junction box is ideal for making wiring connections above or below decks, even in areas subject to occasional spray.Connector Strips Installed in BoxesMolded nylon encases pairs of connectors that use screw compression to secure wires without the use of lugs. Ideal for electronic installations. Brass barrels capture wires and are held in place with a stainless steel “finger” compressed by a screw. The screw does not make contact with the wires, protecting the copper strands from cuts and breakage and meeting ABYC standards.Features:Similar to BX Series junction boxes but made from rugged, non-corrosive, high-impact polypropyleneThe snap-on cover provides a watertight seal“Universal” cut-to-fit graduated diameter cable entries accommodate a wide cable rangeMultiple position connector strips with “captive” screw compression wire terminals installed, see matrix below for connector strip specifications per boxMultiple knockouts are provided for conduit access (in addition to cable entries)IEC Waterproof Rating: IP55 – “Water projected in jets against the enclosure from any direction shall have no harmful effects.”Specifications:Number of Connector Strips: 2Positions per Strip: 9Max Wire Gauge: 16Number of Cable Entry Ports: 7Number of Cable Entries Installed: 7Spare Cable Entries Provided: 0Cable Diameter Range (inches): .14 – .99Cable Diameter Range (mm): 3.5 – 25.5Box Size (inches): 4.45 x 4.45 x 2.29    Box Size (cm): 11.3 x 11.3 x 5.8