60" Post Guide-On with I-Beam Mounting Kit & Camo Wet Lands Post Guide-On PadsThe kit includes two 60" Post Guide-On With I-Beam Mounting Kits and two Camo Wet Lands Post Guide-On Pads. These Post Guide-Ons allow you to see the location of your trailer when it's underwater. Designed for I-beam trailers and I-beam boat lifts, these guide-ons feature an innovative two-piece mounting clamp that works above or below the I-beam. Brackets will fit onto any height and virtually any width I-beam trailer frame. The camo post-guide-on pads are used to protect the boat finish from scuffs. They are sized for a close fit on standard 2" schedule 40 PVC posts (2-3/8" actual outer diameter). Features:Mounting hardware includedAdjusts out to 19" on each side1-1/2" square. 16 gauge pre-galvanized steel uprights2-3/8" diameter white PVC postsPre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized The galvanized coating is very thin (0.45 oz. on each side)The cover-pads are made from strong polyurethane-coated 600D nylon fabricCovers have nylon closures on each endOpen the bottom and top of the cover-pads to allow LED guide on lampsCovers contain a 1/2" thick closed-cell polyurethane foam inner padColor of post-guide-on covers: Camo Wet LandsKit Includes:Part 27648: C.E. Smith 60" Post Guide-On With I-Beam Mounting Kit Part 27903: C.E. Smith Post Guide-On Pad - 48" - Camo Wet Lands Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width*Sold in pairs