BOW PRO 571 Bow Thruster 57KGF - 12VThe BOW PRO thrusters are fitted with proven induction technology. This system makes the use of carbon brushes obsolete. As a result, the bow thruster is very quiet and has indefinite* run-time! The (AC) induction motor is controlled by the VETUS MCV motor controller. This in-house-engineered motor controller can handle both 12V, 24V and AC motors, making the new bow thruster suitable for almost all boats!The BOW PRO thruster is controlled by a proprietary CANBUS protocol. There are two different panels available for this thruster; one fully-proportional basic panel and one fully-proportional panel with lock-function. This allows the boat to be moored without the use of ropes. Letting passengers board your vessel have never been this easy! Evolution is to continue on a set of good properties, so there are similarities with its predecessors: remained are the very silent propeller blades and the streamlined tailpiece. Retrofitting a BOW PRO thruster, therefore, is a piece of cake as the new motor is interchangeable with the tailpiece and flange of our thruster range.Features:Range of Boat Size: 28ft - 34ftThrust in pounds force: 125 lbsMotor horse power: 4Tunnel- center line below the waterline: 150MMVoltage: 24V Precision proportional controlEndurance Rated Run-time - up to 10 minutes (dependant on model) at full powerMaintenance-free brushless motorSealed ingression protection construction - motor sealed for improved corrosion resistance in damp bilge environmentsBuilt-in over-temp and low battery voltage protectionSuitable for high demanding applications (e.g. for use in rental & charter vessels)This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.