- Sleek Profile, upgraded Windage/Elevation knobs
- Separated Power Ring And Eyepiece That Will Accept Flip-Up Lens Caps
- Precision Ground lenses That Are larger Than Comparable Scopes For Better Light Transmission
- Index-Matched HiLume Lens Multi-coatings
- Double Internal springs And Positive Steel-On-Steel adjustments For Repeatable Accuracy
- 30mmtube
- Battery Type - Cr2032
- Matte
- Ballistic Plex E1 Reticle
- Field Of View (In Feet @ 100 yards): 33 Low - 13 High
- Exit Pupil (mm): 13 Low-5.0 High
- Click Value (In. @ 100 yards): .5
- Max Adj.(In. @ 100 yards): 50
- Eye Relief (In.): 3.1-3.8
- Length (In.): 12.2
- Weight (ounces): 13
Ballistic Plex E1
A Series Of cascading dots To The Left And Right Of The Reticle Help Compensate For crosswinds. The dots Represent a 10 Mph Crosswind (+/- 1.5 inches at 400 Yd.) For Most Hunting Cartridges. For a 5 Mph Crosswind, Half The Distance Between Dot And Reticle. For 20 Mph Crosswind, Simply Double The Distance
Unique Technical Features
The outer Tubes And Internal Components Are extremely Robust
The Adjustment System Is:
- Repeatable
- Steel On Steel
- With Audible clicks
Double Internal Spring Force. Every Burris Scope Has It
On All Rifle Scopes:
? Each Scope Is Filled And purged at Least 24 times With High Quality, Laboratory Grade Dry Nitrogen. Each Nitrogen Cycle absorbs Airborne And Residual Surface Moisture That Is evacuated From The Scope
? Every Scope Is individually Recoil, Water And fogproof Tested
? Burris uses specially Made Quad Seals To Provide Double Insurance Against Leakage
Recoil Test
Burris Scopes Are subjected To Extreme Recoil Tests
An Impact Machine Is Used To Measure And Duplicate The Recoil Pulse Acceleration And Duration
This Machine Has Been Calibrated And Verified By An independent Laboratory To Replicate The Wave frequencies And Shock impulses That a Scope Is subjected To
Waterproof Test
All Burris Optics Are proven To Be absolutely Waterproof
Each Scope Is submerged In Water With a Temperature Of 50? C
The extremely Hot Water transfers Its Heat To The Scope And The Internal Nitrogen expends 100% Testing assures Quality
Fog Test
The Nitrogen contained In The Scope Is:
? Of High Quality (Ultra Dry, Laboratory Grade Nitrogen)
? Ultra Pure
? Ultra Clean
To Be Sure That All Airborne Moisture And Surfaces Moisture Within a Scope Is evacuated, Testing consists Of 24 cycles Of
? pressurizing The Scope
? subjecting It To a Vacuum
The Tests Are Both Cost And Time Intensive
