Xtreme Tactical Riflescope (XTR) 30mm 1-4X24mm Illuminated XTR Ballistic 5.56 Gen2 Riflescope W/ Fastfire III W/ P.E.P.R. Mount

• Extra-Large, Ultra-Premium lenses Produce unsurpassed resolution, Clarity, And Brightness
• XT-1 Tactical Adjustment Knobs
  • Featuring The Precision And Durability Of Steel-On-Steel Construction, Both Radial And Vertical resettable Zero references, +(Up) And -(Down) Revolution indicators, Extreme Environment Quick Detach Adjustment Dust Caps, The XT-1 Knobs Deliver The Most Accurate, Secure, And Repeatable adjustments Possible. The XT-1 Knobs Are The Only We Know Of That Provide The Rifleman a True resettable Zero Reference. The Rotation Indicator Is at Zero Half Way Through The Adjustment Range. Other brands usually Have a Series Of Numbers starting at One And Increase vertically But Do Not really Mean Anything Other Than a Comparative Reference -- That Is, The Number ?4? May Be The True Center Of The Scope Rather Than ?0?.
    Each Scope Is Assembled With 360O conventionally Numbered Radial Dials Whereas The Numbers Increment All The Way Around The Dial. A Second Pair Of 180O Radial Dials Is Included Whereas The Numbers Increment Half Way Around The Dial Allowing The Marksman To More Easily Count adjustments Each Direction From Zero For Most applications Where Less Than 1/2 Turn Of The Dial Is Needed During Deployment.
• Index-Matched HiLume multicoating boosts Clarity And, Enhanced With New StormCoat, causes Water To Bead And Shed Off For a Clearer View When Water drops Are Present
• 30mm, resulting In 25% thicker Main Tubes And 42% More Strength
• Double-Force Coil Spring Suspension Locks The Inner Tube In Place For Unfailing Accuracy
• Side Parallax Adjustment And Side Illumination Switch
  • An Optimum Sized Parallax Adjustment Knob Is located On The Left Side Of The Adjustment Turret For Ease In Seeing And adjusting For Parallax at Varied distances. (This Feature Is Available On riflescopes With Magnification Of 10X Or higher.) This Knob Also features Large Easy To See Distance indicators And Either Large Deep Relief Finger grooves (On nonilluminated Scopes) Or Two Large Finger-wings To Assist Adjustment In Cold Weather Or With Gloves. Rotate The Parallax Adjustment Knob Until The Distance Marking Corresponding To The Target Distance lines Up With The Reference Mark On The Scope Turret. Scopes With Both Parallax Adjustment And illuminated Reticle Have Both The Illumination Switch And Battery Cover as An Extension Of The Parallax Adjustment Knob.
• Feature Side Turret-Mounted Parallax Adjustment Systems
• XTR Ballistic 5.56 Gen2 Reticle
  • The Burris Ballistic Mil-Dot Reticle Has Been Very Popular For Many years With Long Range Shooters For Both Big Game Hunting And Varmint Shooting. The Original Ballistic Mil-Dot Reticle Was Designed To Be Optimized For extremely Fast Shooting, Flat Trajectory Cartridges. The XTR Ballistic Mil-Dot Reticle Is Designed Specifically For The Military-Standard Cartridges Of The 5.56 (.223) And 7.62 Nato (.308Win) rounds. Designed For The Center Crosshair To Be Sighted In (Zero?D) at 100 meters, then Each Additional Ballistic Line Below Center represents 100 meters In Additional Target Distance. The Ammunition That The XTR Ballistic Mil-Dot Reticle Is Calibrated For Is The 7.62 Nato (.308Win) 175Gr HPBT Matchking @2600Fps. By Design, This Same Calibration Is Nearly Identical To The 5.56 Nato (.223Rem) 77Gr HPBT Matchking @ 2750Fps Out To 500 meters. It Is Important To Note That The Calibration Of The XTR Ballistic Mil-Dot Reticle Or Mil-Dot Reticle Is Set Very Near The highest Magnification Available On Your Riflescope. The Power Ring Has a Calibration Dot Which Must Be Lined Up With The Index Line On The Scope Tube To Achieve The Designed Calibration.
• A True 1X Optic, It Is Shown Matched With 1 Inch Height 30mm XTR Rings And a FastFireII Reflex Sight
• Waterproof, fogproof, Shockproof And Warranted Forever
• Matte
• Field Of View (In Feet @ 100 yards): 100 Low - 32 High
• Exit Pupil (mm): 100 Low - 32 High
• Click Value (In. @ 100 yards): .5 MOA
• Max Adj.(In. @ 100 yards): 130
• Eye Relief (In.): 3.5-4.0
• Length (In.): 11.3
• Weight (ounces): 17

Unique Technical Features
The outer Tubes And Internal Components Are extremely Robust
The Adjustment System Is:
- Repeatable
- Steel On Steel
- With Audible clicks
Double Internal Spring Force. Every Burris Scope Has It

On All Rifle Scopes:
? Each Scope Is Filled And purged at Least 24 times With High Quality, Laboratory Grade Dry Nitrogen. Each Nitrogen Cycle absorbs Airborne And Residual Surface Moisture That Is evacuated From The Scope
? Every Scope Is individually Recoil, Water And fogproof Tested
? Burris uses specially Made Quad Seals To Provide Double Insurance Against Leakage

Recoil Test
Burris Scopes Are subjected To Extreme Recoil Tests
An Impact Machine Is Used To Measure And Duplicate The Recoil Pulse Acceleration And Duration
This Machine Has Been Calibrated And Verified By An independent Laboratory To Replicate The Wave frequencies And Shock impulses That a Scope Is subjected To

Waterproof Test
All Burris Optics Are proven To Be absolutely Waterproof
Each Scope Is submerged In Water With a Temperature Of 50? C
The extremely Hot Water transfers Its Heat To The Scope And The Internal Nitrogen expends 100% Testing assures Quality

Fog Test
The Nitrogen contained In The Scope Is:
? Of High Quality (Ultra Dry, Laboratory Grade Nitrogen)
? Ultra Pure
? Ultra Clean
To Be Sure That All Airborne Moisture And Surfaces Moisture Within a Scope Is evacuated, Testing consists Of 24 cycles Of
? pressurizing The Scope
? subjecting It To a Vacuum
The Tests Are Both Cost And Time Intensive