Gun Bore Mop 28 Gauge - Effectively applies lubricants and cleaning solvents - Absorbs contaminants - Industry standard 8-32 male thread 5-40 for .17 Cal. & .204 Cal. - 5/16-27 male thread 12, 20, & 28 & 410 Gauge - Effectively applies lubricants

Manufacturer: Tetra

Model: TG1038 The Tetra 28 Gauge Bore Mop is a cleaning tool designed for use with shotguns chambered in 28 gauge. The bore mop is typically used with a cleaning solvent or oil to remove fouling and other debris from the bore of your shotgun. The mop is made from highly absorbent cotton and is designed to fit snugly in the bore of your shotgun, allowing you to thoroughly clean the inside of the barrel. To use the bore mop, you should first ensure that your shotgun is unloaded and disassembled. Then, attach the bore mop to a cleaning rod and apply a small amount of cleaning solvent or oil to the mop. Insert the bore mop into the barrel of your shotgun and use a twisting motion to push the mop through the barrel, removing any fouling or debris as it passes through. After a few passes with the bore mop, you can then use a clean patch to remove any remaining debris and solvent from the barrel. It's important to always follow the manufacturer's instructions when using cleaning tools like the Tetra 28 Gauge Bore Mop. Additionally, you should always wear eye protection and work in a well-ventilated area when cleaning your firearm. If you're unsure about how to use the bore mop or have any concerns about maintaining your shotgun, it's always a good idea to consult with a firearms expert or a qualified gunsmith.