Universal Laser
Bore Sight
By Vector Optics
The SCBC01 Laser Boar Sight Comes With 4 Bore adapters That Will Fit Any .22
To .50 Caliber Rifle Or Handgun. The Boar Sight Goes Into The End Of The Barrel
And projects a Red Laser Beam Out From The Center Of It. This Allows For The
Accurate Bore Alignment Of Scopes, Iron Sights, Or Laser Sights On Any Handgun
Or Rifle.
Proper Setup Of SCBC01 Bore Sight
Install The Appropriate Screw Into The Right Sized Adaptor For Your Firearm.
(Longer Screw In larger Caliber. Sorter Screw For smaller Caliber)
Screw Adapter Into The Back Of The Laser Bore Sight. (As Shown Above) ü The
Adapter expands larger as You Turn It Into The Laser Bore Sight.
Adjust The Adapter For a Snug Fit Into The Barrel.
Slide Unit In Until The larger Tapered End Stops.
This Has Now Aligned It With The Center Of The Axis Of The Bore
Proper Operating Of Laser Bore Sight
Make Sure The Unit Is Pointed In a Safe Direction Before You Turn It On.
To Turn The Laser On Rotate The Switch a Half Turn In Either Direction Until You
Feel a Click And The Laser Is On.
To Turn Laser Off Rotate The Switch Another Half Turn
Batteries
The SCBC01 Laser Bore Sight operates Off Of (3) LR49 / Ag13 Batteries Witch
Already Come installed In The Unit.
You Can Expect Over 1 Hour Of Continuous Use Out Of The Batteries.
To Replace The Batteries
Turn The Switch/Battery Holder To The On Position.
Push Switch Forward (Toward The Laser End) slightly And Lift Out From Rear.
Aligning Your Sight
Note: Final Adjustments Should Be Made At The Range
For Scoped Firearms
1. If You Have The Ability To Bore Sight Your Scope at 50 – 100 yards then No
Compensation For The Offset Of The Scope And Barrel Will Be Necessary, Just
Adjust Your crosshairs To Correspond With The Laser Dot.
2. Shorter distances Such as 25 – 50 Feet Will Need To Be Compensated For By
Measuring The Approximate Distance Between The Center Of Your Barrel And The
Center Of Your Scope. Adjust Your Scope That Distance Above The Laser Dot.
For Iron Sights
Adjust The Sights To Place The Projected Laser Dot On Top Of The Front Sight
Blade. The Distance For Sighting-In Iron Sights Is Not Near as Critical, However
The greater The Distance The greater The Accuracy.
Download PDF Users
Manual Click Here!
Manufacturer: Vector Optics
Model: SCBC-01
SKU: SCBS01
