Evolution Gun Works Tikka T3 Picatinny Rail Scope Mount 0 MOA Silver Ambid The Tikka T3 mount is made specific to the gun, and will also work with Tikka T3 Lite Rifles. - 0 MOA - if shooting 0-500 yards - 20 MOA - if shooting 500-1000 yards The Tikka T3 mount is provided with standard 6-48 screws, as Tikkas produced after 2004 are drilled at tapped for 6-48 screws. Your gun may require metric screws. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount, weighing in at 2-3oz on average. Also, in many cases, it will not obstruct usage of factory iron sights. EGW’s one piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. EGW machine these in our shop using one of our USA-made Fadal machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite. Specifications: - Machined from: Domestic 6061 T6 Extruded Aluminum - Finish: Silver Anodized - Mounting Hardware: Hex head screws and wrench provided - Center Spread: 3.245" - Overall Length: 7.458" Manufacturer: Evolution Gun Works MFG Number: 44001 UPC: 841370106189