Flush Mount Rod HolderRH-525SS Medium 30° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.

Flush Mount Rod HolderRH-529HS Medium 15° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.

Flush Mount Rod HolderRH-530 Large 30° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.

Flush Mount Rod HolderRH-532VS Large 0° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.

Flush Mount Rod HolderHeavy Duty Bar PinAll Stainless SteelRH-530SS/XS Large 30°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.

Flush Mount Rod HolderHeavy Duty Bar PinAll Stainless SteelRH-532VS/XS Large 0°The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.

Swivel Base Rod HoldersRH579XLHalf Angle 15° Extra Long TubeStainless Steel Flush Mount w/ Swivel BaseWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in th

RH5110 degree Medium Duty Vinyl Rubber Insert for RH510, RH527V, RH5112, RH552CB, & RH552XL 

RH52630 degree Medium Vinyl Rubber Insert for RH525, RH525SS, RH5325RH52XS 

RH53130  Degree Heavy Duty Vinyl Rubber Insert for RH530, RH530SS, RH5330, RH530SS/XS, RH575

RH53515 Degree Heavy Duty Vinyl Rubber Insert for RH534H, RH534HS, RH5334H, RH579H

Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Penn International 30Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.

Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Shimano Tiagra 30WConstructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.

Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Shimano Tiagra 50WConstructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.

Rod Storage SystemsSingle Rod Rack SetsAnodized Finish: Bright GoldSimple and efficient rod storage. Constructed of Marine Grade Anodized Aluminum with a variety of Anodized Finishes. Rod Butt is inserted into Closed End of set. Vinyl insert protects the Rod Butt. Tip of rod is placed into Locking End of set and Nylon Locking Ring is rotated to lock it in. Will support the heaviest of rods. Can be mounted Horizontally, Vertically or Overhead.

Aluminum Clamp-on Rod HoldersModel:  RA5002GLColor:   GoldFits:      1.315" O.D. PipeMount:  VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, ins

Aluminum Clamp-on Rod HoldersModel:  RA5003GLColor:   GoldFits:      1.660" O.D. PipeMount:  VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, ins

Aluminum Clamp-on Rod HoldersModel:  RA5004SLColor:   SilverFits:      1.900" O.D. PipeMount:  VertialJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, in

Aluminum Clamp-on Rod HoldersModel:  RA5004GLColor:   GoldFits:      1.900" O.D. PipeMount:  VertialJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, inse

Aluminum Clamp-on Rod HoldersModel:  RA5202GLColor:   GoldFits:      1.315" O.D. PipeMount:  HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, i

Aluminum Clamp-on Rod HoldersModel:  RA5203SLColor:   SilverFits:      1.660" O.D. PipeMount:  HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe,

Aluminum Clamp-on Rod HoldersModel:  RA5205SLColor:   SilverFits:      2.375" O.D. PipeMount:  HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe,

Swivel Base Flush Mount Rod HolderPart #: RH-5365SS Medium 30 Stainless SteelWithout a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds

Swivel Base Flush Mount Rod HolderMedium, 15 Degree, Stainless SteelWithout a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequ

Rod Storage SystemsSingle Rod Rack SetsAnodized Finish: Bright BlackSimple and efficient rod storage. Constructed of Marine Grade AnodizedAluminum with a variety of Anodized Finishes. Rod Butt is inserted intoClosed End of set. Vinyl insert protects the Rod Butt. Tip of rod is placedinto Locking End of set and Nylon Locking Ring is rotated to lock it in.Will support the heaviest of rods. Can be mounted Horizontally, Verticallyor Overhead.

Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 1.050 O.D. PipeColor: BlackPipe Size:#1Fits:1.050" O.D. PipeMount: VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. In

Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 1.660 O.D. PipeColor: BlackPipe Size: #3Fits: 1.660" O.D. PipeMount: VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten

Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 2.375" O.D. PipeColor:BlackPipe Size:#5Fits:2.375" O.D. PipeMount:VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Inst

Clamp-On Rod Holder - White Aluminum - Horizontal Mount - Fits 1.050" O.D. PipeColor:WhitePipe Size:#1Fits:1.050" O.D. PipeMount:HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten.

Clamp-On Rod Holder - White Aluminum - Horizontal Mount - Fits 1.315" O.D. PipeColor:WhitePipe Size:#2Fits:1.315" O.D. PipeMount:HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten.

Clamp-On Rod Holder - Black Aluminum - Horizontal Mount - Fits 1.660" O.D. PipeColor:BlackPipe Size:#3Fits:1.660" O.D. PipeMount:HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten.

Rod Butt Extender f/Short-Butt Rods In Heavy Rod HolderStainless Steel Rod Butt Extender enables short butt rods to lock onto pin in heavy rodholders.

Clamp-On Rod Holder - White Aluminum - Horizontal Mount - Fits 1.900" O.D. PipeSpecifications:Color: WhitePipe Size: #4Fits: 1.900" O.D. PipeMount: HorizontalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the

Aluminum Side Mount Rod Holder - Tulip Style - Silver AnodizeLee's side mount rod holders are made to the same high standards with high quality materials as our aluminum clamp-on rod holders. They are useful in applications where clamp-on or flush mount holders are not practical.  Standard finishes are silver or gold anodize.Features:AluminumSilver AnodizeSide MountTulip Style

Rod Holder - Medium - 0° - Stainless SteelThe choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task.

Rod Holder - Heavy Duty - 0° - Stainless SteelThe choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task.

King Fish Rod HolderBolt-on king fish rod holder. Designed to mount under the hardtops, for King Fish. They are also great for Stripper Bass and running Mojos. Powder-coated white to match most hardtops. Mount with four 1/4" bolts, hardware not included. Please measure your hardtop before ordering.

Rod/Reel Hanger Penn INT 50VISW Bright GoldSimple and efficient rod storage. Constructed of Marine Grade Anodized Aluminum with a variety of Anodized Finishes. Rod Butt is inserted into the Closed-End of the set. Vinyl insert protects the Rod Butt. Tip of Rod is placed into Locking End of set and Nylon Locking Ring is rotated to lock it in. Will support the heaviest of rods. Can be mounted Horizontally, Vertically, or Overhead. Colors are available in Satin Silver, Bright Silver, and Bright Gold

Rod/Reel Hanger Penn INT 30VISW Bright GoldSimple and efficient rod storage. Constructed of Marine Grade Anodized Aluminum with a variety of Anodized Finishes. Rod Butt is inserted into the Closed-End of the set. Vinyl insert protects the Rod Butt. Tip of Rod is placed into Locking End of set and Nylon Locking Ring is rotated to lock it in. Will support the heaviest of rods. Can be mounted Horizontally, Vertically, or Overhead. Colors are available in Satin Silver, Bright Silver, and Bright Gol

Rod Butt Extender for Standard & Heavy Swivel Base Rod HoldersComes with one rod butt extender that is extra strong! Made of pure stainless steel. Used on short-butt rods and heavy-duty rod holders and will now fit in heavy swivel base rod holders.*Sold as a single