Ultrajax II String silencers Reduce Noise And Vibration By Surrounding The String With dampening Material. Bow Does Not Lose Velocity. Testing shows a Usual Increase Of 1-3 Fps. Weight: 19 grains.

This Kit contains a Pair Of Solid Or Split Limb Monsterjax, Four Crossbow Slipjax String silencers And One Retention Bolt Dampener.

Widejax Limb Dampener To Fit Bows With Wide spaced Split Limbs, Designed With Six Arm monsterjax dampening And Pads That Are Four times thicker Than The originals For Additional Noise And Vibration Reduction.

The four dot stopper is made of a super soft polymer that is very quiet and long lasting. Made to fit on all manufactures 3/8" cable guard rods. Uses a four dot system to align the string completely in the middle of the stopper to eliminate alignment problems with the string.

Limb dampeners designed for split limb bows. X-shaped dampener wedges snugly between the limbs without the use of screws or adhesives. 11/16” size fits Hoyt and newer BowTech with split limbs. 15/16” size fits bows with wider gaps such as Mathews, PSE, and Bear.

Strategically places weight on your bowstring to gain velocity. Can be used with or without string silencers. Eliminates the need for speed buttons. Silences while improving speed. Installs by slipping over the string(bow press required). Weigh 16 grains each. 4 per pack.

Dampeners can be installed on a stabilizer to reduce vibration. Fits stabilizers with 5/8” -1” outside diameter. 2/pk.

The four dot stopper is made of a supper soft polymer that is very quiet and long lasting. Made to fit on all manufacturers 3/8"string stop rods. Uses a four dot system to align the string completely in the middle of the stopper to eliminate alignment problems with the string.

4-arm dampener helps dampen noise and vibration for your stabilizer. The only stabilizer module designed that has 4 arms with balls at the end for maximum stability and control. 5/16" x 24 thread, weights 2.25 ounces.

The most complete kit. It has 2 universally sized split limb dampeners, a pair of stirrup dampeners, 4 of the heavy duty crossbow string silencers, and 1 bolt spring dampener. This kit comes in black and everything can be installed without a bow press except the string silencers. The stirrup dampeners go on easy if your stirrup has a screw to detach it from the crossbow, then you simply unscrew it and slide these dampeners on. The limb dampeners are universally sized to fit gaps between 3/8" up

Cable guard dampener designed not to interfere with your sight window. Can be placed in front of the cable slide to act as cable guard stop.

Dampeners can be installed on a stabilizer to reduce vibration. Fits stabilizers with 5/8” -1” outside diameter. 2 pk.

Dampeners can be installed on a stabilizer to reduce vibration. Fits stabilizers with 5/8” -1” outside diameter. 2 pk.

Revelations Crossbow Kit includes (2) Limb dampeners designed for split limb bows and (2) Stirrup dampeners. X-shaped dampener wedges snugly between the limbs without the use of screws or adhesives. 11/16” size fits Hoyt and newer BowTech with split limbs. 15/16” size fits bows with wider gaps such as Mathews, PSE, and Bear.

Revelations Crossbow Kit includes (2) Limb dampeners designed for split limb bows and (2) Stirrup dampeners. X-shaped dampener wedges snugly between the limbs without the use of screws or adhesives. 11/16” size fits Hoyt and newer BowTech with split limbs. 15/16” size fits bows with wider gaps such as Mathews, PSE, and Bear.

Split Limb Dampeners install easily without the use of a bowpress. Dampeners fit limb gaps on split limb crossbows from 3/8" to 1 1/8" and lock into position with the provided screws. The retention spring dampener (included) easily slides over the tip of the sprint into position. Adhesives not necessary for installation.

Can be used with or without string silencers. Eliminates the need for speed buttons. Silences while improving speed. Installs by slipping over the string(bow press required). Weigh 16 grains each. 4 per pack.

Limb silencer helps quiet bow noise and jump during the shot. New design features six vibration eating arms for even more repeatable accuracy.

Installs in seconds and easily slips over the end of the stabilizer. Improves accuracy and reduces vibration. Fits stabilizers with 3/4” outside diameter.

Rock solid side bar mount fits left or right handed bows. Build from CNC machined aluminum with a positive locking clamp. Fits riser holes from 1/4”-1/2” diameter. Equipped with quick disconnect to save threads and allow the side bar to be removed in a quick 1/2 turn.

Side bar mount with positive-locking clamp design. Adjusts vertically and horizontally to any angle. Unique lock arm prevents any unwanted movement. Attaches to the riser with a 1/4-20 bolt through design.

The XL hunter stabilizer will give you a more forgiving setup and better pin float which will lead to tighter groups and tack driving accuracy. Bowfinger’s exclusive thick-walled carbon fiber tube with a tough epoxy painted finish provides extreme, unmatched durability. The XL stabilizer features Limbsaver’s broadband dampener providing an extra element of vibration, hand shock, and noise reduction. Includes matte black anodized end caps and (2) 2oz weights.

The XL hunter stabilizer will give you a more forgiving setup and better pin float which will lead to tighter groups and tack driving accuracy. Bowfinger’s exclusive thick-walled carbon fiber tube with a tough epoxy painted finish provides extreme, unmatched durability. The XL stabilizer features Limbsaver’s broadband dampener providing an extra element of vibration, hand shock, and noise reduction. Includes matte black anodized end caps and (2) 2oz weights.

"The sight comes with a full set of metal sight tapes

"The sight comes with a full set of metal sight tapes

The 20/20 scope features a pin groove that keeps the pin straight and the fiber behind the pin, nine 8/32 tapped holes for attaching a light kit, 5/16 mounting slot that accepts a hex or square mounting shaft and 8 pin mounting locations. Kit includes scope housing, lens base, short shade, long shade and peep ring. Filter kit, lens and pin sold separately.

Pin and fiber kit for the 20/20 scope. Includes an aluminum CNC machined pin with matte black anodized finish and blue and green fiber.

Pin and fiber kit for the 20/20 scope. Includes an aluminum CNC machined pin with matte black anodized finish and blue and green fiber.

Pin and fiber kit for the 20/20 scope. Includes an aluminum CNC machined pin with matte black anodized finish and blue and green fiber.

Pin and fiber kit for the 20/20 scope. Includes an aluminum CNC machined pin with matte black anodized finish and blue and green fiber.

Pin and fiber kit for the 20/20 scope. Includes an aluminum CNC machined pin with matte black anodized finish and blue and green fiber.

Pin and fiber kit for the 20/20 scope. Includes an aluminum CNC machined pin with matte black anodized finish and blue and green fiber.

Pin and fiber kit for the 20/20 scope. Includes an aluminum CNC machined pin with matte black anodized finish and blue and green fiber.

Stabilizer built for quiet and balanced shots. Contains a proprietary After Shock internal dampener to rapidly dissipate resonating vibration during and after the shot. Made from rigid carbon fiber. Includes (1) 2 oz. weight and (1) 1 oz. weight.

Stabilizer built for quiet and balanced shots. Contains a proprietary After Shock internal dampener to rapidly dissipate resonating vibration during and after the shot. Made from rigid carbon fiber. Includes (1) 2 oz. weight and (1) 1 oz. weight.

Target stabilizers made with a smaller .625” outside diameter for less wind drag and a steadier aim in windy conditions. Accepts Bowfinger weights with 5/16-24 thread (not included).

Target stabilizers made with a smaller .625"� outside diameter for less wind drag and a steadier aim in windy conditions. Accepts Bowfinger weights with 5/16-24 thread (not included).

Weight set for Bowfinger stabilizers. Includes one each of 1 oz., 2 oz., 3 oz., and 4 oz. weights. Makes it easy to adjust in 1 oz. increments. 5/16-24 threads.

Drop away arrow rest featuring full arrow containment and zero bounce back. Launcher arm stays up on a slow letdown.

Drop away arrow rest featuring full arrow containment and zero bounce back. Launcher arm stays up on a slow letdown.