Aluminum inserts for Gold Tip Airstrike arrows. Weight: 250 (26.4 gr.), 300 (25.4 gr.), 340 (24.9 gr.), 400 (24.3 gr.)

Straightness Tolerance: +/- .001”;.166 ID;Weight Tolerance: 0.5 GR;2.1” Fusion X II vanes;Dyna-Tek Ceramic Clear Coating Slick Shield;8.3 GPI

Straightness Tolerance: +/- .001”;.166 ID;Weight Tolerance: 0.5 GR;2.1” Fusion X II vanes;Dyna-Tek Ceramic Clear Coating Slick Shield;7.5 GPI

"Straightness Tolerance: +/- .0025"";Weight Tolerance: +/- .5 gr;2.1” Fusion X II vanes;Ballistic Collar Insert;GTO Nock;Nock Collar;8.3 GPI"

Straightness Tolerance: +/- .006”;Weight Tolerance: 2 GR;2.1” Fusion X II vanes;7.6 GPI

Half out Aluminum insert.

Glue In Point For The Gold Tip Triple X shafts.

Glue In Point For The Gold Tip Triple X shafts.

Pin nock Bushing For Goldtip X-Cutter shafts And arrows.

Allows for use of Gold Tip GTO nocks. Prevents the arrow shaft from being damaged by nock end impact.

Allows for use of standard GT series nocks. Prevents the arrow shaft from being damaged by nock end impact.

Allows for use of standard GT series nocks. Prevents the arrow shaft from being damaged by nock end impact.

Reduced diameter shaft designed for durability and accuracy in wind and other inclement weather.

Reduced diameter shaft designed for durability and accuracy in wind and other inclement weather.

The proven performance of the XT Hunter in a high speed shaft. Straightness tolerance of +- .003” and weight tolerance of +- 2 grains. Available in sizes 600 (5.9 GPI), 500 (6.3 GPI), 400 (7.4 GPI), 340 (8.2 GPI), and 300 (8.8 GPI). Includes Accu-Lite nocks and inserts. Factory fletched with 2 in. Raptor vanes.

The proven performance of the XT Hunter in a high speed shaft. Straightness tolerance of +- .003” and weight tolerance of +- 2 grains. Available in sizes 600 (5.9 GPI), 500 (6.3 GPI), 400 (7.4 GPI), 340 (8.2 GPI), and 300 (8.8 GPI). Includes Accu-Lite nocks and inserts. Factory fletched with 2 in. Raptor vanes.

Gold Tip's most popular bolt choice offers unmatched straightness tolerances and superb accuracy. Straightness tolerance of +-.005" and weight tolerance of +-2 grains.

Gold Tip's most popular bolt choice offers unmatched straightness tolerances and superb accuracy. Straightness tolerance of +-.005" and weight tolerance of +-2 grains. Available in 20" and 22" lengths.

Gold Tip’s most popular bolt choice offers unmatched straightness tolerances and superb accuracy. Straightness tolerance of +-.005” and weight tolerance of +-2 grains. Available in 20” and 22” lengths. Shafts are 7.3 GPI. Includes brass inserts, moon nocks, and flat nocks.

Carbon bolts built to a weight between the Swift and Nitro to offer crossbow shooters another option for optimal performance. Straightness tolerance of +-.005" and weight tolerance of +-2 grains.

Brass insert fits standard diameter Gold Tip .246 shafts. Weight: 100 gr.

Ballistic collar helps to align broadheads while increasing the strength of the shaft/insert/broadhead connection. Compatible with all Kinetic series shafts.

For use in Gold Tip target shafts. Accepts size .166” GTO nocks.

For use in Gold Tip target shafts. Accepts size .166” GTO nocks.

Glue in target points for Gold Tip X-Cutter arrow shafts.

An updated take on an archery classic. Built to take the challenges of small game and bird hunting. Twisted Flu-Flu feathers ensure short travel and a found arrow. Carbon arrow shaft provides strength and durability. Straightness tolerance of +-.006”, weight tolerance of +-2 gr. Available in sizes 500 (7.6 GPI), 400 (9.5 GPI), and 300 (10.4 GPI). Length: 30”. Nocks and inserts installed.

Used in conjunction with the Pierce insert to increase durability at the point/broadhead connection. Also adds additional weight to give the arrow a higher front of center. Fits standard thread 5/16” diameter points.

Used in conjunction with the Pierce insert to increase durability at the point/broadhead connection. Also adds additional weight to give the arrow a higher front of center. Fits standard thread 5/16” diameter points.

Glue in target point with longer taper for increased performance and fewer kick outs on the 3D and field courses. Available in the most popular weights for each Gold Tip target shaft.

For use on Pierce shafts to provide increased durability to the nock end of the shaft.

For use on Pierce shafts to provide increased durability to the nock end of the shaft.

Single cavity molded so that each nock is identical in size and weight. Fits all Gold Tip pin nock bushings. Weight: 6.1 gr.

Allows for use of pin nocks on Gold Tip arrow shafts. Prevents the arrow shaft from being damaged by nock end impact.

Allows for use of pin nocks on Gold Tip arrow shafts. Prevents the arrow shaft from being damaged by nock end impact.

Weight screws allow the shooter to customize their FOC to optimize accuracy and arrow performance. Fits Gold Tip Pierce points and inserts.

Built of a heavyweight, small diameter carbon that is ideal for the traditional archer. Features a wood grain finish with the look of custom footing.

The ultimate arrow in the Gold Tip Hunter series. Unmatched durability with some of the tightest tolerances in the industry. Straightness tolerance of +-.001" and weight tolerance of +- 0.5 grains. Available in sizes 500 (7.3 GPI), 400 (8.2 GPI), 340 (8.9 GPI), and 300 (9.3 GPI). Includes GTO series nocks with bushings and Accu-Lite inserts. Factory four-fletched with 2.75" low profile vanes for increased broadhead accuracy.

The ultimate arrow in the Gold Tip Hunter series. Unmatched durability with some of the tightest tolerances in the industry. Straightness tolerance of +-.001" and weight tolerance of +- 0.5 grains. Available in sizes 500 (7.3 GPI), 400 (8.2 GPI), 340 (8.9 GPI), and 300 (9.3 GPI). Includes GTO series nocks with bushings and Accu-Lite inserts. Factory four-fletched with 2.75" low profile vanes for increased broadhead accuracy.

The ultimate arrow in the Gold Tip Hunter series. Unmatched durability with some of the tightest tolerances in the industry. Straightness tolerance of +-.001" and weight tolerance of +- 0.5 grains. Available in sizes 500 (7.3 GPI), 400 (8.2 GPI), 340 (8.9 GPI), and 300 (9.3 GPI). Includes GTO series nocks with bushings and Accu-Lite inserts. Factory four-fletched with 2.75" low profile vanes for increased broadhead accuracy.

"Straightness Tolerance: +/- .0025"";Weight Tolerance: +/- .5 gr;8.3 GPI"