The RSA QD provides a Forward Attachment Point For The Magpul MS4 Sling And Other Push-Button QD Slings. Made From Corrosion Resistant Steel, Mounts On 1913 Picatinny Rail, And Places The Attachment Point at An Angle Optimized For Comfortable Two-Point Sling Use While maintaining Easy Push-Button Access. Made In USA.

The Forward Sling Mount Is a Sling Attachment Point For The Mossberg 590A1 Series Of shotguns Which clamps Onto The Barrel And Magazine Tube. Designed Specifically For The A1's Heavy walled Barrels, It Can Be configured For Use With Either Push-Button QD Sling Swivels Or One-Point Clip-In Style attachments Such as The MS3 Paraclip, The HK Hook, ITW Mash Hook, And others. Made From Precision Cast Steel That Is Melonite Treated For Wear And Corrosion Resistance. Dedicated Fit For Mossberg 590A1 Mo

The RSA provides a Low Profile Forward Sling Attachment Point For The Magpul MS2 Or MS3 And Other Clip-In Systems. Made From nitrocarburized Steel For Wear And Corrosion Resistance, The RSA Attaches To Any 1913 Picatinny Rail And Has Been proven To Withstand Stress Tests Of Over 300 pounds While Only weighing a Mere 1.3 ounces.

The MSA (MOE Sling Attachment) Is Designed For Use With Legacy MOE Hand Guards And Forends. It provides a Forward Sling Attachment Point For The Magpul MS3 Sling And Other Clip-In Sling Systems, And Is constructed Of Steel With a melonite Finish For Wear And Corrosion Resistance.

The SGA Receiver Sling Mount Is a Connection Point For The Remington 870 SGA Shotgun Stock And One-Point Clip-In Style attachments Such as The MS3 Paraclip, The HK Hook, ITW Mash Hook, And others. Made From Precision Cast Steel That Is Melonite Treated For Wear And Corrosion Resistance. Dedicated Fit For The Magpul SGA Stock, The Receiver Sling Mount Can Be installed On Either The Left Or Right Side Of The Front Of The Stock.

The Forward Sling Mount Is a Sling Attachment Point For The Remington 870 And Mossberg 500/590/Maverick Series Of shotguns Which clamps Onto The Barrel And Extended Magazine Tube. It Can Be configured For Use With Either Push-Button QD Sling Swivels Or One-Point Clip-In Style attachments Such as The MS3 Paraclip, The HK Hook, ITW Mash Hook, And others. Made From Precision Cast Steel That Is Melonite Treated For Wear And Corrosion Resistance.

This Adapter features a Cross-Bolt Lock Bar In Paraclip That Allows The User To optionally Lock Its Lever Closed For Extra Security. Steel Paraclip Lever Is Case Hardened And Finished With Melonite For Extreme Resistance To Wear And Corrosion. For Rear Mounting It Works With The Magpul Asap For Optimal Shoulder transitioning In One-Point Mode as Well as The SGA Receiver Sling Mounts. Also Compatible With Many Snap-Hook Style Sling Loops* And Standard Or QD Sling Swivels. For Front Mounting Compa

This Adapter features a Cross-Bolt Lock Bar In Paraclip That Allows The User To optionally Lock Its Lever Closed For Extra Security. Steel Paraclip Lever Is Case Hardened And Finished With Melonite For Extreme Resistance To Wear And Corrosion. For Rear Mounting It Works With The Magpul Asap For Optimal Shoulder transitioning In One-Point Mode as Well as The SGA Receiver Sling Mounts. Also Compatible With Many Snap-Hook Style Sling Loops* And Standard Or QD Sling Swivels. For Front Mounting Compa

The MS1 MS4 Adapter Can Be Combined With The MS1 Sling And QD Sling Swivel (Mag540) To Provide Fast Transition Between One-Point And Two-Point Configuration. It Has a Heavy-Duty Push-Button QD Sling Swivel For One-Point Attachment And QD Sling Swivels And Ambidextrous QD Shackle Allows Easy Convertibility And provides Weapon Quick-Release capabilities In An Emergency. It Also features a Custom 1.25 Inch Wide Nylon Webbing Material And Colored Webbing Has Near Infrared (NIR) Treatment To Reduce

Clip-Style Sling Attachment Point For 1-1/4" Webbing. Lockable, Melonite Finished Steel And Reinforced Polymer Hardware. Compatible With Asap Plate, RSA, MSA, SGA Receiver Sling Mount, And Many Other Clip-In Sling Attachment points. A Cross-Bolt Lock bar Allows The User To optionally Lock The Lever Closed For Extra Security. For Rear And Front Mounting It Is Compatible With Many Snap-Hook Style Sling Loops* And Standard Or QD Sling Swivels. * Snap-Hook Style Sling Loops With An Inner Diameter

The QD Paraclip Adapter Fits Push-Button QD Swivel sockets To Allow Use With Paraclips And Other Clip-In Sling attachments. Made From Precision-Cast Melonite Finished Steel.

The MSA QD (MOE Sling Attachment QD) Attaches Directly To MOE Hand guards And forends, providing a Forward Sling Attachment Point For Push-Button QD Slings Such as The MS4 Gen 2. The MSA QD Is Made From Melonite Finished Steel For Wear And Corrosion Resistance. It Is Designed Specifically For Use With Legacy MOE Hand guards And forends, Has a Low Profile Design, And Has Anti-Rotation Feature That Prevent Swivels From Spinning. Note: MOE Accessory Slot Must Be enlarged By User To Allow Installa

The Magpul QDM Design Allows For a Lower Profile Sling Swivel That offers One-Handed manipulation, a High Strength Bale That rotates freely And canalizes Sling Webbing To Prevent Rollover, And Superior Resistance To Corrosion With a Melonite Finish. It Is a Custom Quick-Disconnect Sling Swivel For 1.25" Webbing, And Fits All Standard Sized QD Cups.

While Both The Gen 1 UBR And STR Come With Type 1 Push-Button QD Swivel sockets Pre-installed On The Left Side Of The Stock, This Sling Mount Kit Type 2 Can Be installed On The Opposite Side To Add Additional Push-Button QD Sling Swivels Or Our Own Magpul QDM. Additionally, For Running Ambidextrous Sling Swivels On The SGA, MOE Rifle, MOE Fixed Carbine, MOE AK, Zhukov-S, Hunter 700, And Hunter X-22 Stocks, This Type 2 Kit Must Be utilized In conjunction With The Optional Type 1 Kit. Note: The

The Hunter/SGA Cheek Riser Kit Is Designed For Use With The Magpul Hunter X-22, Hunter X-22 Takedown, SGA Shotgun Stocks, Hunter 700, Hunter 700L, And Hunter American Stocks. It Allows The User To Configure Their Firearm With The Ideal Cheek Piece Height To Accommodate a Wide Range Of Sight/Optic configurations And Shooter preferences. The Riser Kits Are Available In Two configurations, Low And High. This High Kit Includes One (1) 0.50" Cheek Riser And One (1) 0.75" Cheek Riser.

The SGA Receiver Sling Mount Is a Connection Point For The Mossberg 500/590/590A1 SGA Shotgun Stock And One-Point Clip-In Style attachments Such as The MS3 Paraclip, The HK Hook, ITW Mash Hook, And others. Made From Precision Cast Steel That Is Melonite Treated For Wear And Corrosion Resistance. Dedicated Fit For The Magpul SGA Stock, The Receiver Sling Mount Can Be installed On Either The Left Or Right Side Of The Front Of The Stock.

The MS1 MS4 Adapter Can Be Combined With The MS1 Sling And QD Sling Swivel (Mag540) To Provide Fast Transition Between One-Point And Two-Point Configuration. It Has a Heavy-Duty Push-Button QD Sling Swivel For One-Point Attachment And QD Sling Swivels And Ambidextrous QD Shackle Allows Easy Convertibility And provides Weapon Quick-Release capabilities In An Emergency. It Also features a Custom 1.25 Inch Wide Nylon Webbing Material And Colored Webbing Has Near Infrared (NIR) Treatment To Reduce

The M-LOK Gi Sling Swivel Is a Traditional Sling Swivel Loop For M-LOK Compatible Systems. Its Base Is machined From Mil-Spec anodized Aluminum And Utilizes a Coated Steel Loop, Which accepts Up To 1-1/4 Webbing. With Its Compact And Low Profile Design, It provides a Minimal Footprint Which Allows For More Handguard Real Estate. Like Any Other Magpul M-LOK Accessory, The M-LOK Gi Sling Swivel features Recoil/Impact Mitigation lugs And Cammed T-Nuts For Proper M-LOK Engagement.

The Magpul Bipod Is constructed Of Mil-Spec Hard anodized 6061 T-6 Aluminum, Stainless Steel internals, And Injection-Molded Reinforced Polymer. Deploying And adjusting It Is Quick And Easy. Spring-tensioned legs Stow neatly Forward And Snap Down And Lock Into Place With One Hand. The legs Extend a Full Four inches, From 6.3" To 10.3". It Can Tilt Up To 50 degrees And Pan Up To 40 degrees. Additionally, The Magpul Bipod Has The Exclusive Ability To Lock Pan at 0 degrees While maintaining Full Ti

The Magpul Bipod For M-Lok Is constructed Of Mil-Spec Hard anodized 6061 T-6 Aluminum, Stainless Steel internals, And Injection-Molded Reinforced Polymer. Deploying And adjusting It Is Quick And Easy. Spring-tensioned legs Stow neatly Forward And Snap Down And Lock Into Place With One Hand. The legs Extend a Full Four inches, From 6.3" To 10.3". It Can Tilt Up To 50 degrees And Pan Up To 40 degrees. Additionally, The Magpul Bipod Has The Exclusive Ability To Lock Pan at 0 degrees While maintaini

The Magpul Bipod For 1913 Picatinny Rail Is constructed Of Mil-Spec Hard anodized 6061 T-6 Aluminum, Stainless Steel internals, And Injection-Molded Reinforced Polymer. Deploying And adjusting It Is Quick And Easy. Spring-tensioned legs Stow neatly Forward And Snap Down And Lock Into Place With One Hand. The legs Extend a Full Four inches, From 6.3" To 10.3". It Can Tilt Up To 50 degrees And Pan Up To 40 degrees. Additionally, The Magpul Bipod Has The Exclusive Ability To Lock Pan at 0 degrees W

The Magpul Bipod For 1913 Picatinny Rail Is constructed Of Mil-Spec Hard anodized 6061 T-6 Aluminum, Stainless Steel internals, And Injection-Molded Reinforced Polymer. Deploying And adjusting It Is Quick And Easy. Spring-tensioned legs Stow neatly Forward And Snap Down And Lock Into Place With One Hand. The legs Extend a Full Four inches, From 6.3" To 10.3". It Can Tilt Up To 50 degrees And Pan Up To 40 degrees. Additionally, The Magpul Bipod Has The Exclusive Ability To Lock Pan at 0 degrees W

The Magpul Bipod For A.R.M.S.17S Style Is constructed Of Mil-Spec Hard anodized 6061 T-6 Aluminum, Stainless Steel internals, And Injection-Molded Reinforced Polymer. It Is Designed To Be Used In conjunction With An Appropriate 17S-Style Mounting Device That Is purchased separately And Is Used For Proper Mounting To Your Weapon System Of Choice. Deploying And adjusting It Is Quick And Easy. Spring-tensioned legs Stow neatly Forward And Snap Down And Lock Into Place With One Hand. The legs Extend

The Magpul Bipod For A.R.M.S.17S Style Is constructed Of Mil-Spec Hard anodized 6061 T-6 Aluminum, Stainless Steel internals, And Injection-Molded Reinforced Polymer. It Is Designed To Be Used In conjunction With An Appropriate 17S-Style Mounting Device That Is purchased separately And Is Used For Proper Mounting To Your Weapon System Of Choice. Deploying And adjusting It Is Quick And Easy. Spring-tensioned legs Stow neatly Forward And Snap Down And Lock Into Place With One Hand. The legs Extend

Made In The USA, The Magpul Bipod Sling Stud QD Is The Next Offering In The Magpul Bipod Line. Designed To Mount On The Uncle Mikes Sling Swivel Stud Found On Most Sporting Rifles. The Sling Stud QD Is The strongest, Most Fully Featured Bipod Available With Direct Sling Stud Mounting Capability. The Stainless-Steel Mounting System Self-locates And aligns perfectly Every Time, And An Ergonomic Thumb Wheel Allows For Excellent Grip To Ensure Easy tightening. Additionally, Two Sizes Of Non-Marring

Made In The USA, Lightweight But incredibly Strong, The PMAG D-50 Ev9 Is a highly-Reliable, Drum Magazine For Large-Format Pistols And Pistol Caliber Carbines That Feed From CZ Scorpion EVO 3-Pattern magazines. The PMAG D-50 Ev9 boasts Many Of The proven features Of Its 5.56 And 7.62 predecessors, The PMAG D-60 AR/M4 And PMAG D-50LR/SR Gen M3, While providing The User With a Similar Magazine Capacity Increase. The D-50 Ev9 features a ratcheting Loading Lever That removes Tension From The Interna

Made In The USA, The PMAG 10 5.56 AC Is a Polymer 5.56X45 Nato Magazine Designed For Short Action Accuracy International Chassis Systems (AICS)-Pattern Bottom Metal, including The Bolt Action Magazine Well For The Magpul Hunter Family Of Stocks. It features Gen M3 Technology, including a Self-Lubricating Follower, a Stainless-Steel Spring, And Constant-Curve Internal Geometry For Smooth Feeding. It Also incorporates Offset Feed Lip Geometry That maximizes Bolt Face Engagement, Guaranteeing Relia

Magpul's Sling Mount Kit, Type 1 Can Be added To Either Side Of The SGA, MOE Rifle, MOE Fixed Carbine, MOE AK, Zhukov-S, Hunter 700 And Hunter X-22 Stocks For Use With Push-Button QD Sling Swivels Or Our Own Magpul QDM. *Note- Swivels Not Included. Made In The USA.

Significantly Reduced In Size From The MBUS, It Sits at Just 0.44" High When Folded And 1.15" at Its widest Point. Its Aesthetics Are Derived From The MBUS Pro, But The MBUS 3 Sight Is constructed Of Our Impact-Resistant Polymer, Making It Lightweight And extremely Durable. Featuring The Same Spring-Loaded Technology as Its Predecessor, They Can Be deployed With An Ambidextrous Push-Button. The MBUS 3 Rear Sight Sits at Standard AR-Height When deployed And Includes a Rapid-Select Aperture Syste

The PMAG 10/30 AR/M4 Gen M3 Is a Polymer Magazine For AR15/M4 Compatible Weapons. It Was Designed For users Who Reside In areas With Magazine Capacity restrictions But Desire a Standard 30-Round Magazine Form. Built In-Line With Our Other PMAGS, The PMAG 10/30 provides The Same Next-Gen Impact And Crush Resistance, Constant Curve Geometry, And Long-Life Stainless-Steel Spring To Ensure Smooth Feeding. Weve added a Proprietary Lock Plate That reduces The Maximum Capacity To 10 rounds, And Its per

The MOE Enhanced Trigger Guard Is An upgraded Trigger Guard That Is Easily installed Without The Use Of Specialized tools, using Two Set screws To Secure It To The Lower Receiver. This eliminates The Need To Install a Roll Pin With a Hammer And Punch And reduces The Chance Of Any Damage To The Receiver Due To Improper Installation Or Out Of Spec receivers

The MOE Enhanced Trigger Guard Is An upgraded Trigger Guard That Is Easily installed Without The Use Of Specialized tools, using Two Set screws To Secure It To The Lower Receiver. This eliminates The Need To Install a Roll Pin With a Hammer And Punch And reduces The Chance Of Any Damage To The Receiver Due To Improper Installation Or Out Of Spec receivers

The MOE Enhanced Trigger Guard Is An upgraded Trigger Guard That Is Easily installed Without The Use Of Specialized tools, using Two Set screws To Secure It To The Lower Receiver. This eliminates The Need To Install a Roll Pin With a Hammer And Punch And reduces The Chance Of Any Damage To The Receiver Due To Improper Installation Or Out Of Spec receivers

Designed as a Cost-Effective Upgrade For Ruger American Predator & Ranch Rifle Models Equipped With An AR Magazine Compatible Stock, The Hunter American Stock Ruger American Short Action, STANAG Magazine Well features a Fully Adjustable Length Of Pull, Comb Height, Enhanced Ergonomics, And Reinforced Construction. Constructed Of Reinforced Polymer And An anodized Aluminum Bedding Block With Steel Recoil lugs, The Hunter American Stock Ruger American Short Action, STANAG Magazine Well Requires

Compatible With Wide Or Narrow forends Or M1913/M-LOK adapters using The Uncle Mikes Pattern QD Sling studs. The MOE Bipod Is The Latest And Lightest Bipod In The Magpul Bipod Line. At 8Oz, It Weighs Almost 40% Less Than Some Of Our existing bipods, While Still providing a Dependable, Stable Platform To Shoot From. Designed To Mount To The Popular Uncle Mike's Sling Swivel Stud, Magpul utilized The Latest Technology In Injection Molding To Offer a Bipod With a Significant Reduction In Weight Th

Building On The Success Of Its Predecessor, The DAKA Can, Large shares Many Of The Same features as Our Original DAKA Can, With The added Benefit Of a larger Form Factor For Expanded Storage options. Designed To Fit Large eyewear Such as The Magpul Defiant. The DAKA Can Is Rugged, Weather And Dust-Resistant, High-Strength, Injection-Molded Polymer Storage Solution. Soft-Surfaced, High-Density Foam Completely lines The Interior, ensuring lenses, Electronics And Other Precious items Remain Secure

The MS1 Lite Sling Is a Compact Version Of The Versatile MS1 Rifle Sling. It Was Created With a Custom Woven 1" Wide Single-Ply Webbing To Drastically Reduce Extra Bulk And Offer a High-Strength, streamlined Sling That avoids Snagging. The Custom Weave resists Rolling And twisting, Keeping The MS1 Lite consistently Comfortable While maintaining The No-Pill And Anti-Chafe characteristics That Magpul Slings Are Known For. The smaller Size Also Allows For easier Stowage In Tight, Snag-Prone areas S

The MS1 Lite Sling Is a Compact Version Of The Versatile MS1 Rifle Sling. It Was Created With a Custom Woven 1" Wide Single-Ply Webbing To Drastically Reduce Extra Bulk And Offer a High-Strength, streamlined Sling That avoids Snagging. The Custom Weave resists Rolling And twisting, Keeping The MS1 Lite consistently Comfortable While maintaining The No-Pill And Anti-Chafe characteristics That Magpul Slings Are Known For. The smaller Size Also Allows For easier Stowage In Tight, Snag-Prone areas

The MS1 Lite Sling Is a Compact Version Of The Versatile MS1 Rifle Sling. It Was Created With a Custom Woven 1" Wide Single-Ply Webbing To Drastically Reduce Extra Bulk And Offer a High-Strength, streamlined Sling That avoids Snagging. The Custom Weave resists Rolling And twisting, Keeping The MS1 Lite consistently Comfortable While maintaining The No-Pill And Anti-Chafe characteristics That Magpul Slings Are Known For. The smaller Size Also Allows For easier Stowage In Tight, Snag-Prone areas S

Maxim's RDB System Is Designed To Convert Your Straight Blowback AR-9 Into a highly Efficient And Reliable Roller-delayed System, providing unparalleled Performance And Accuracy. The CQB Length RDB System Works With Maxim Defense CQB Length Buffer Tubes Only, ensuring a Seamless Fit And Maximum Performance. Maxim's System Is Designed To Provide a More Efficient And Reliable Operation, Reducing Recoil And Increasing Accuracy. The Roller-delayed System Allows For a Smoother Cycling Action, providi