The Circle Edition Pistol Compensator From The Strike Micro Threaded Comp Can Work With Just About Any Size Slide using a Threaded Barrel With 1/2"X28 Threads Per Inch. Si Internal Testing Has Typically Seen a Reduction Average Range (Dependent On Application) Of 8-15% In Felt Recoil. Made From AISI 1144 Steel Bead Blasted With Quench Polish Quench Process Finish, The Strike Micro Threaded Comp - Circle Is Small And Lightweight at Only a Total Length Of 16.3mm (0.64) While redirecting Gas For R
The Quad Is a Pistol Compensator From The Strike Micro Threaded Comp Can Work With Just About Any Size Slide using a Threaded Barrel With 1/2"X28 Threads Per Inch. The Wide Front Wall Baffling redirects Gas To Mitigate Felt Recoil And Reduce Muzzle Rise. Made From S45C Steel With HRC40-45 Heat Treatment And a Black Oxide Finish, The Strike Micro Threaded Comp Quad offers a smaller Threaded Barrel Compensator.
The Strike Industries Magwell For CZ Scorpion EVO Is a flared Design Specifically For Scorpion EVO Pistols And Carbines To Provide easier Magazine Insertion For Fast Reliable Reloading. With The Addition Of An increased Radial Edge In Front Of Receiver, This Magwell Aids In improving Grip Support For The Offhand. This Magwell Is Made Of High-Strength Impact Resistant Custom blended Si Polymer Extreme Material.
The Strike Gear S3 Sling Lite Is a Testament To Minimalist Design And Functionality. This Sling Sports a streamlined 1-Inch Width, ensuring Lightweight Comfort And Straight Forward Usability. It features Twin Elastic keepers For Additional Webbing Storage And a Cross-stitched Handle For Rapid Sling Length Adjustment. A Padded Shoulder Section adds Comfort During Extended Use. The Integrated Ladder Lock Buckle simplifies One-Handed manipulations, While Multiple tri-bar Buckles Provide a Secure G
Strike's Barrel Thread Protector is a machined aluminum thread protector that adds a degree of customization and aesthetics to protect your crown and threads.
Strike Industries Recoil Spring For Glock Pistols Allows You To Fine Tune The Timing And Recoil. Constructed And Wound From 17-7Ph Stainless Steel Flat Wire, The Recoil Spring Is For Reliability And Longevity.
This Recoil Spring Is 11 Lbs.
Strike Industries Recoil Spring For Glock Pistols Allows You To Fine Tune The Timing And Recoil. Constructed And Wound From 17-7Ph Stainless Steel Flat Wire, The Recoil Spring Is For Reliability And Longevity.
This Recoil Spring Is 13 Lbs.
Strike Industries' Enhanced Pin Kit For Glock features An Anti-Walk Locking Block Pin. Designed For The Serious User In Mind, The High Strength Steel pins Are upgraded For Better Serviceability And Function. The Anti-Walk Locking Block Pin engages The Slide Stop Lever Spring In a Similar Way To The Trigger Pin To Help Prevent Walk Out. The ends Of The pins Are Concave To Support a Pin Punch, Prevent Slippage, And Mitigate Potential Damage. The Trigger/Locking Block pins Are constructed Of Carbon
Strike Industries' Enhanced Pin Kit For Glock features An Anti-Walk Locking Block Pin. Designed For The Serious User In Mind, The High Strength Steel pins Are upgraded For Better Serviceability And Function. The Anti-Walk Locking Block Pin engages The Slide Stop Lever Spring In a Similar Way To The Trigger Pin To Help Prevent Walk Out. The ends Of The pins Are Concave To Support a Pin Punch, Prevent Slippage, And Mitigate Potential Damage. The Trigger/Locking Block pins Are constructed Of Carbon
The Monopod attachment for the Modular Fixed Stock enhances stability in the prone or bench rest positions. It can also be stowed in the stock itself to stay out of the way until you need it or can be detached entirely for lighter overall weight.
Strike Industries' Modular Guide Rod For Gen 3 Glocks Is a Stainless Steel, customizable System That accepts Any aftermarket Glock Spring as Well as Strike Industries' Custom Recoil Spring Weights. Its Corrosion Resistant Stainless Steel Shaft And anodized Aluminum End Cap Will Not Rust, Crack Or Break as Easily. The End Caps Come In Various Colors And designs To Add a Custom Look. The Modular Guide Rod Is Compatible With G17,17L,22,24,31,34,35,37 Models. It Includes shims To Ensure The Guide Ro
Strike Industries Mil-Spec Forward Assist Assembly For The AR15/M16 Comes Complete With a Spring And Roll Pin. It Is constructed Of High Strength 4140 Steel And Is Head Treated. The Forward Assist Is Ideal For upgrading Your existing Component Or replacing Worn Or Broken Parts. This Model Has a Hex Pattern Design On The Front And Includes a Bolt Assist Tool.
The Link Anchor Handstop Is Made From a Heat Resistant Polymer That Allows Comfortable Grip In Any Shooting Condition. It Has a Low Profile Design That Allows Mounting Through Any MLOK Or KeyMod openings. The Unique Tooth Design Allows The handstop To Be Reversible, Giving The Option For Either a "Push" Or "Pull" Style Grip. With The added ridges On The Surface, The Link Anchor provides unmatched Dexterity From Your Palm To The fingertips. A True Lightweight Modification That Is Not Only Comfort
The Strike Industries Extended Magazine Plate (E.M.P+5 For The PMAG M3) Design provides Smoother, faster Magazine Reloading, And Handling. It provides Multiple functions To Include Additional 5 Round Capacity.
The Strike Industries Extended Magazine Plate For Glock G19 (9mm) Was Designed To Provide Smoother Magazine Reloading Through a Low Drag/No Snag Design While maintaining Maximum Magazine Capacity With Any OEM Double Stack Glock Magazine For G19. The Extended Magazine Plate (EMP) provides An Additional +5 rounds To Any G19 Glock Magazine.
Enhance Your Glock To Be More Ergonomic And Aggressive In Styling With Strike's Aluminum Base Plate. The added Geometrical curves Allow a More Refined Grip On The End Of The Magazine For a Smoother Reload. Reload With Speed And Style Because Of The added Ramp Structure To Assist In faster Removal And easier Insertion Of Your Glock Magazine.
Enhance Your Glock To Be More Ergonomic And Aggressive In Styling With Strike's Aluminum Base Plate. The added Geometrical curves Allow a More Refined Grip On The End Of The Magazine For a Smoother Reload. Reload With Speed And Style Because Of The added Ramp Structure To Assist In faster Removal And easier Insertion Of Your Glock Magazine.
The Strike Industries AR Modular Magazine Release (MMR) offers a Quick And Simple Way To Configure Your Mag Button Preference To One Of Three (3) Included options. No Need To remove The Mag Catch If You Want To Change The Button. A Simple Push Of The Magazine Button Adapter using An Object That Fits In The Space Allows For a Quick And Simple Swap Of The Magazine Button. The Si MMR Comes With Included Standard, Extended And Oversized Buttons So You always Have The Modularity To Swap at Home Or at
The TRIBUS Is Next Iteration Of The Previous AR-ECN&EEP. Its features Include Two Addition QD Mounting points added To The Left & Right Side Of The Extended End Plate. Totaling In 3 QD Mounting points. The Extended End plate's QD Mounts Are pushed Back Away From The Webbing Of The Primary Hand, Allowing For Better Weapon manipulations In Tight spaced And Under Stress Without The Startling Pain That Can Result From a pinched Hand When using a Sling Attached To a Standard, Flat QD End Plate. Anoth
The Strike AR-15 Magazine (10 rounds) Is a High-Strength Polymer .223 Remington/5.56 Nato AR-15/M4/M16 Compatible Magazine. With The "AccuRamp" First Round Feed Tray Design Feature, Keep Your eyes On The Target Knowing That Your reloads Are Ready To Go. To Ensure The Last Little Bit Of Reliability, There Is An Included Anti-Tilt Follower So Even uneven Pressure Will Not Lock Up This Magazine No Matter Which Hand You Use. Anti-Slip Finger grooves On Both Sides Of The Magazine Help Give Positive T
The Strike Industries G43X Extended Magazine Plate (G43X EMP) Design provides Smoother Magazine Reloading Through Its Low Drag / No Snag Design. The G43X EMP provides Multiple functions, Primarily An Additional 2 rounds bringing The G43X Capacity Up To 12 ( 10 Round Double Stack + 2 With EMP).
The Strike Industries Mag Sleeve For Glock 19 (9mm), Compatible For All generations, Is Designed To Provide a More Aesthetically Pleasing Look And Smoother Magazine Reloading Through a Slow Drag / No Snag Design. The Mag Sleeve serves To Increase Cross-Platform Ergonomics When utilizing a Glock 17 Magazine On The More Compact Glock 19 Model. The flared Sides Of The Mag Sleeve Also Increase Manual Magazine Reload Proficiency, ensuring That You Gain Positive Control Of The Magazine When executing
The Scout Light Pro Dual Fuel W/Z68 Tailcap, Rifle-Mounted Weapon Light's Low-Profile Mount Allows Optimum Light positioning; Ideal For Use With Other Rail-Mounted Accessories. Features Up To 1,500 Lumens Of White Light For Close To Long Range Tactical applications With The *Sf18650B Rechargeable Lithium-Ion Battery; delivers 1,200 Lumens Of Blinding White Light With 123A Batteries; Its Total Internal Reflection (TIR) Lens shapes The Beam For Plenty Of Reach And Ample Surround Light; constructed
The Ultra-Compact Mini Scout Light Pro Is The Next Generation In SureFire's Trusted Scout Light WeaponLights. Featuring SureFires New Low-Profile Mount (LPM), The Mini Scout Light Pro delivers Versatility By Allowing The User To Optimize The Lights Position Relative To The Handguard And The Laser aiming Device (If installed). Rugged And Reliable, The LPM Can Be Easily And Securely Attached To Any Mil-Std-1913 Or M-LOK Rail. The Mini Scout Light Pros Recoil-Proof, Premium Led generates An Impress
The Sea12 Extreme Angle Bipod features An Overmolded Flex Ready Joint For a More Stable Shooting Platform. It Is Designed For Hunting Or Shooting situations Where Extreme Angles Apply. The Bipod Mounts To Your Picatinny Rail.
TacFire's Single Point Double Bungee sling is ideal for close body carry and easy weapon handling. It is constructed of a high density nylon webbing with a steel clip and can hold up to 150 lbs. The sling is also adjustable 20" to 30".
This model has a black finish
Up01-C2: Ready To Be Built Into Your Next Upper, This Kit Includes a Black anodized 7075 T6 Aluminum Stripped Upper Receiver, Forward Assist Assembly, Dust Cover Assembly, And A2 Style Charging Handle. The Only Thing You Need To Finish Your Upper Is a BCG, Barrel, Gas Block, Gas Tube, Handguard, And Muzzle Device. (Sold separately)