HERITAGE .22WMR CYLINDER BLACK 6 SHOT

MicroJust Seating Stem - Weight: 0.25 lbs - Quantity: 1/EA

22 Nosler 2-Die Set

The Hornady Match Grade New Dimension Bushing 2-Die Set is designed to provide the ultra precision and match winning performance demanded by serious shooters. The Match Grade Dies feature self centering interchangeable neck sizing bushings that are held to strict tolerances to provide superior accuracy. This die set includes a Full-Length Sizing Die and Seating Die with Roll Crimp. Plastic storage box and two Sure-Loc rings included. Shellholder sold separately. - Die Types Included: - Full-len

22 Hornet 2-Die Set - Weight: 1.40 lbs - Quantity: 2/EA

22 Nosler 2-Die Set

Tight Wall Concentricity: Concentricity helps to ensure proper bullet seating in both the case and the chamber of your firearm. Higher concentricity also aids in a uniform release of the bullet on firing for optimal velocity and accuracy. - Uniform Case Wall Thickness: Benchrest shooters have long known that uniform case wall thickness is vital to accuracy. We manufacture to extremely tight tolerances to ensure this critical element is as consistent as possible. - More Reloads per Case: We treat

These cases are specially modified to work with Lock-N-Load Precision gauges. A special fine thread is used to attach them to the gauges ensuring that they remain perfectly square for precise alignment in the chamber of your firearm. Second the neck of the case is made perfectly round and opened slightly to allow a standard diameter bullet to slip into the case mouth effortlessly but concentrically to ensure the most precise results possible.

Muzzle Brake-QDL is designed specifically for the HX-QD 338 Ti for maximum recoil reduction when unsuppressed. This muzzle device is NOT compatible with other QD suppressors.

Rifle Wrench is the perfect addition to your workbench and range bag to handle all HX-QD suppressors and mounts. It is recommended to use this wrench to properly torque your mount to your system. The perfect wrench for those setups where the mount is close to the rail.

Made from 17-4 Stainless Steel and is heat treated then black nitride finished for improved wear and corrosion resistance. This accessory is for use on fixed barrel systems. - Features: - Interchangeable with suppressors that have 1.125x28 threads - Interchangeable between RAD 9 and 45 - Wrench flats

HUXWRX' 7.62 bore alignment rods ensure proper concentricity and alignment of the suppressor and muzzle device along the bullet trajectory to prevent misalignment and strikes. It is recommended that barrel-to-suppressor alignment be verified on any build before it is first fired. Currently HUXWRX offers bore alignment rods in three calibers: 5.56 7.62 and .338.

HUXWRX' 5.56 bore alignment rods ensure proper concentricity and alignment of the suppressor and muzzle device along the bullet trajectory to prevent misalignment and strikes. It is recommended that barrel-to-suppressor alignment be verified on any build before it is first fired. Currently HUXWRX offers bore alignment rods in three calibers: 5.56 7.62 and .338.

This multi-caliber blast deflector is constructed with 17-4 stainless steel and is compatible with all HUXWRX HX-QD Muzzle Brakes and Flash Hiders (up to .338). It was designed to redirect the blast forward protecting the shooter and bystanders from micro-concussions and overpressure. Additionally it doubles as a thread protector for your muzzle device. It is ideal for shooting against cover and/or in the prone position. Similar to HUXWRX muzzle devices the Blastphemy is coated with QPQ black ni

Manufacturer: HUX
Mfg No: 2311
Size / Style: HUNTING ACCESSORIES

JP Adjustable Gas System - The JPGS-5B model is our minimized small bore design intended to mount underneath many hand guard models on the market. - This model also now includes our locking adjustment feature which consists of an integral brass set screw that can be tensioned against the adjustment screw after it has been set to prevent any migration that might occur. - Full coverage around gas port providing improved seal and better heat dissipation - True clamp-on design with four positive cla

Hand Guard QD Sling Mount - The QD sling system is becoming the heavy duty standard and the new JPHG-SM makes for the perfect interface for all our hand guard lines. - Easy to use and frustration-free the QD sling system tops the market for duty or competition use. This modular accessory allows attachment at any point and your MK III or earlier generation JP hand guard: the accessories you want right where you want them. - Includes mounting screws.

This spring kit will yield a 3.5-4.0 lb. trigger pull with JP Fire Control parts. This kit is intended for use with JP trigger parts and will not necessarily yield substantial change on standard AR-15 trigger components.

Custom Centerless Ground and Polished Operating Spring - Small-Frame Carbine Length - Precision centerless ground and polished operating springs offer a smoother and quieter operation in AR buffer tubes. Improved impulse feel results in faster sight recovery and improved reliability.

Accessory Tactical Rail: 2 (w/o Backer Plate) - 2 tactical rail segment without backer plate for accessory mounting on JP Hand Guards - Usage/Compatibility: 3:00 9:00 and 45° positions on RC hand guards 6:00 position on all JP hand guards

Both a Left And Right Side Single Point Sling Attachment Are Included In This Kit.

The KRISS MagEx2 Kit is the ultimate capacity extending base plate for your factory standard Glock magazines Gen 3 and later. The KRISS MagEx2 Kit is made up of the extended baseplate outer sleeve and extended spring constructed of durable and lightweight reinforced composites. Combining the MagEx2 Kit with the factory standard Glock magazine body and follower is a perfect match of reliable feeding toughness and aesthetics for the KRISS Vector. - The MagEx2 Kit is caliber-specific and available

The BMD™ is a unique blast shield that allows the muzzle brake contained inside it to continue to function as normal with regard to muzzle climb mitigation. The patent pending design features unique 'through' ports that connect the muzzle brakes vertical vents to the outside atmosphere. This feature allows the brake to function while within the device unlike other system that alter the way the original device works and inevitably remove or massively reduce efficiency. The device also features se

The BMD™ is a unique blast shield that allows the muzzle brake contained inside it to continue to function as normal with regard to muzzle climb mitigation. The patent pending design features unique 'through' ports that connect the muzzle brakes vertical vents to the outside atmosphere. This feature allows the brake to function while within the device unlike other system that alter the way the original device works and inevitably remove or massively reduce efficiency. The device also features se

The BMD™ is a unique blast shield that allows the muzzle brake contained inside it to continue to function as normal with regard to muzzle climb mitigation. The patent pending design features unique 'through' ports that connect the muzzle brakes vertical vents to the outside atmosphere. This feature allows the brake to function while within the device unlike other system that alter the way the original device works and inevitably remove or massively reduce efficiency. The device also features se

LANTAC E-BCG® Enhanced Bolt Carrier Group. - M16 Full Auto Style for increased mass and lock time. - Our BCG is precision machined from 8620 steel with a shot peened bolt manufactured from Carpenter 158 or 9310 and Magnetically Particle Inspected. - The entire carrier assembly is QPQ (Quench Polish Quench) Nitride coated Black this is a specialized type of Nitrocarbrising Case Hardening that creates a very hard smooth surface with increased corrosion resistance and low coefficient of friction. -

The BMD™ is a unique blast shield that allows the muzzle brake contained inside it to continue to function as normal with regard to muzzle climb mitigation. The patent pending design features unique 'through' ports that connect the muzzle brakes vertical vents to the outside atmosphere. This feature allows the brake to function while within the device unlike other system that alter the way the original device works and inevitably remove or massively reduce efficiency. The device also features se

The BMD™ is a unique blast shield that allows the muzzle brake contained inside it to continue to function as normal with regard to muzzle climb mitigation. The patent pending design features unique 'through' ports that connect the muzzle brakes vertical vents to the outside atmosphere. This feature allows the brake to function while within the device unlike other system that alter the way the original device works and inevitably remove or massively reduce efficiency. The device also features se

The BMD™ is a unique blast shield that allows the muzzle brake contained inside it to continue to function as normal with regard to muzzle climb mitigation. The patent pending design features unique 'through' ports that connect the muzzle brakes vertical vents to the outside atmosphere. This feature allows the brake to function while within the device unlike other system that alter the way the original device works and inevitably remove or massively reduce efficiency. The device also features se

Precision manufactured from stainless steel extruded tube. - Black Nitrided for enhanced corrosion resistance heat & erosion resistance over standard un-treated tubes. - Nitrided tubes run cleaner & cooler. - Black tube eliminates light reflection of the part through the handguard. - Comes complete with Gas Tube Roll Pin. - Laser engraved - Manufactured in the USA.

LANTAC E-BCG Enhanced Bolt Carrier Group with TiN coating. - M16 Full Auto Style for increased mass and lock time. - Our new TiN E-BCG is precision machined from 8620 Steel with a shot peened bolt manufactured from Carpenter 158 and Magnetically Particle Inspected. - The entire carrier assembly is TiN Titanium Nitride coated. - The carriers patented and patent pending design features unique shrouded and forward facing gas ports that have also been re sized so that gas is vented differently to a

The Leupold DeltaPoint Pro Dovetail Mount allows you to mount your Leupold Deltapoint Pro Sight to your handgun. Kit includes mount hardware dovetail and Torx wrench. Note: Image shows mount for HK (145147) all mounts are similar but may differ slightly in dimensions. - Material: Mount=Polymer; Dovetail=Steel

The Leupold DeltaPoint Pro Dovetail Mount allows you to mount your Leupold Deltapoint Pro Sight to your handgun. Kit includes mount hardware dovetail and Torx wrench. Note: Image shows mount for HK (145147) all mounts are similar but may differ slightly in dimensions. - Material: Mount=Polymer; Dovetail=Steel

Mark 6 Throw Lever - The Mark 6 throw lever is an accessory designed to allow the scope user to quickly and easily manipulate the power selector ring on the Mark 6 family of scopes.

Leupold Quick-Release Weaver-Style steel mounts will accept both QRW and PRW rings. For dependability ease of use and rock solid dependability you can't find a better base. - Finish: Matte Black - Material: Steel - Style: Weaver - Piece: 2

Leupold 2-Piece Backcountry Scope Mounts with Integral Rings are constructed of lightweight and rugged 7075 aluminum. These premier precision machined mounts combine the traditional base and the ring to fit directly on the rifle receiver. An elegant mounting system that's easy to install and rock solid. - Finish: Matte Black - Material: Aluminum - Height: Medium - Style: Integral Scope Rings - Piece: 2 - Tube Diameter: 1