Set replaces Non-Detachable Factory Loop And Includes Chicago Screws To Fill holes From Factory-instAlled Swivels. Contains 3/8" Machine Screw Stud With Nut And Washer, 1/4" Rear Swivel Stud, Chicago Screws And One Pair Gt Locking Swivels. Fits Models 77 And 77/22 All-Weather Stocks.

Swivel Set For Bolt-Action Rifles, 1'' Loops, Black Oxide Finish, Includes 1/2'' Wood Screw Fore End Swivel Stud, 3/4'' Wood Screw Rear, Spacers & 2 looking swivles

Swivel Set For Bolt-Action Rifles, 1'' Loops, Black Oxide Finish, Includes 1/2'' Wood Screw Fore End Swivel Stud, 3/4'' Wood Screw Rear, Spacers & 2 looking swivles

Set features Flush Mount Rear Swivel Stud Base And Magazine Cap Adapter. Primary Set For Ithaca Mag 10 And 51A Deerslayers (?83 And Later), But Fits Most Pump And Autos. Includes One Pair Gt Locking Swivels.

Set includes mage cap replacement with swivel stud 3/4 wood screw rear swivel stud and one pair GT Locking Swivels. - 20ga. GTSW-86 1 Loops Black-Oxide Finish

Ultralight weights 13.5 oz. - Extends from 13 1/2 to 23 - Adjustable legs with spring return. - 100% Made in the USA.

This Adapter Allows The Attachment Of a Harris Bipod To Any Picatinny Rail. Made From Aircraft Quality Aluminum And hardcoated To Mil. specs.

Harris Bipods Are Ultra-Light And Lightning Quick. Folding legs Have Completely Adjustable Spring-return extensions. The Sling Swivel Attaches To The Clamp. Time-proven Design And Quality manufactured With Heat Treated Steel And Hard alloys. Bipods Have a

Harris Bipods Are Ultralight And Lightning Quick. Folding legs Have Completely Adjustable Spring-return extensions. The Sling Swivel Attaches To The Clamp. Time-proven Design And Quality manufactured With Heat Treated Steel And Hard alloys. Bipods Have a

Ultra-Light Harris Bipods Are Lightning Quick And manufactured With Quality Heat Treated Steel And Hard alloys. The bipods Are Quick-Detachable And Clamp To The Q.D. Stud Of Bolt Action Rifles With Conventional Stock Design. Carrying Your Rifle With a sli

The No.5 Stud Fits Colt AR-15 Round Handguard Without Alteration. Swivel Included.....See Details For More Info.

The Model LM Harris Bipod Is An Improved Version Of The Original Leg Notch Bipod. The Legs Eject By Spring Action. Four Height settings From 6 To 9 inches. Weight Is 10 ounces.....See Details For More Info.

The Series S Harris Bipod rotates To Either Side For Instant Leveling On uneven Ground. The Hinged Base Has Tension Adjustment And Buff sprIngs To Eliminate Tremor Or Looseness In Crotch Area Of The Bipod. This Is An Improved Version Of The Original Leg

Harris Bipods Are Ultralight And Lightning Quick. Folding legs Have Completely Adjustable Spring-return extensions. The Sling Swivel Attaches To The Clamp. Time-proven Design And Quality manufactured With Heat Treated Steel And Hard alloys. Bipods Have a

Harris Bipods Are Ultra-Light And Lightning Quick. Folding legs Have Completely Adjustable Spring-return extensions. The Sling Swivel Attaches To The Clamp. Time-proven Design And Quality manufactured With Heat Treated Steel And Hard alloys. Bipods Have a

Harris Bipods Are Ultra-Light And Lightning Quick. Folding legs Have Completely Adjustable Spring-return extensions. The Sling Swivel Attaches To The Clamp. Time-proven Design And Quality manufactured With Heat Treated Steel And Hard alloys. Bipods Have a

The Model LM Harris Bipod Is An Improved Version Of The Original Leg Notch Bipod. The Legs Eject By Spring Action. Seven Height settings From 9 To 13 inches. Weight Is 11 ounces.....See Details For More Info.

The Series S Harris Bipod rotates To Either Side For Instant Leveling On uneven Ground. The Hinged Base Has Tension Adjustment And Buff sprIngs To Eliminate Tremor Or Looseness In Crotch Area Of The Bipod. This Is An Improved Version Of The Original Leg

Harris Bipods Are Ultralight And Lightning Quick. Folding legs Have Completely Adjustable Spring-return extensions. The Sling Swivel Attaches To The Clamp. Time-proven Design And Quality manufactured With Heat Treated Steel And Hard alloys. Bipods Have a

Ultralight weights 13.5 oz. - Extends from 13 1/2 to 23 - Adjustable legs with spring return. - 100% Made in the USA.

Create your own Box or Tower blind with these Blind Brackets from HME. These brackets provide support for angled legs on large platforms. The heavy gauge steel construction features gusseted corners and welded joints. The bottom opening is sized for 4x4 lumber. The Brackets provide an 8 degree angle for lateral stability. Each Bracket set comes 4 to a pack.

MicroJust Seating Stem - Weight: 0.25 lbs - Quantity: 1/EA

22 Nosler 2-Die Set

The Hornady Match Grade New Dimension Bushing 2-Die Set is designed to provide the ultra precision and match winning performance demanded by serious shooters. The Match Grade Dies feature self centering interchangeable neck sizing bushings that are held to strict tolerances to provide superior accuracy. This die set includes a Full-Length Sizing Die and Seating Die with Roll Crimp. Plastic storage box and two Sure-Loc rings included. Shellholder sold separately. - Die Types Included: - Full-len

22 Hornet 2-Die Set - Weight: 1.40 lbs - Quantity: 2/EA

22 Nosler 2-Die Set

Tight Wall Concentricity: Concentricity helps to ensure proper bullet seating in both the case and the chamber of your firearm. Higher concentricity also aids in a uniform release of the bullet on firing for optimal velocity and accuracy. - Uniform Case Wall Thickness: Benchrest shooters have long known that uniform case wall thickness is vital to accuracy. We manufacture to extremely tight tolerances to ensure this critical element is as consistent as possible. - More Reloads per Case: We treat

These cases are specially modified to work with Lock-N-Load Precision gauges. A special fine thread is used to attach them to the gauges ensuring that they remain perfectly square for precise alignment in the chamber of your firearm. Second the neck of the case is made perfectly round and opened slightly to allow a standard diameter bullet to slip into the case mouth effortlessly but concentrically to ensure the most precise results possible.

Muzzle Brake-QDL is designed specifically for the HX-QD 338 Ti for maximum recoil reduction when unsuppressed. This muzzle device is NOT compatible with other QD suppressors.

Rifle Wrench is the perfect addition to your workbench and range bag to handle all HX-QD suppressors and mounts. It is recommended to use this wrench to properly torque your mount to your system. The perfect wrench for those setups where the mount is close to the rail.

This multi-caliber blast deflector is constructed with 17-4 stainless steel and is compatible with all HUXWRX HX-QD Muzzle Brakes and Flash Hiders (up to .338). It was designed to redirect the blast forward protecting the shooter and bystanders from micro-concussions and overpressure. Additionally it doubles as a thread protector for your muzzle device. It is ideal for shooting against cover and/or in the prone position. Similar to HUXWRX muzzle devices the Blastphemy is coated with QPQ black ni

JP Adjustable Gas System - The JPGS-5B model is our minimized small bore design intended to mount underneath many hand guard models on the market. - This model also now includes our locking adjustment feature which consists of an integral brass set screw that can be tensioned against the adjustment screw after it has been set to prevent any migration that might occur. - Full coverage around gas port providing improved seal and better heat dissipation - True clamp-on design with four positive cla

Hand Guard QD Sling Mount - The QD sling system is becoming the heavy duty standard and the new JPHG-SM makes for the perfect interface for all our hand guard lines. - Easy to use and frustration-free the QD sling system tops the market for duty or competition use. This modular accessory allows attachment at any point and your MK III or earlier generation JP hand guard: the accessories you want right where you want them. - Includes mounting screws.

This spring kit will yield a 3.5-4.0 lb. trigger pull with JP Fire Control parts. This kit is intended for use with JP trigger parts and will not necessarily yield substantial change on standard AR-15 trigger components.

Custom Centerless Ground and Polished Operating Spring - Small-Frame Carbine Length - Precision centerless ground and polished operating springs offer a smoother and quieter operation in AR buffer tubes. Improved impulse feel results in faster sight recovery and improved reliability.

Accessory Tactical Rail: 2 (w/o Backer Plate) - 2 tactical rail segment without backer plate for accessory mounting on JP Hand Guards - Usage/Compatibility: 3:00 9:00 and 45° positions on RC hand guards 6:00 position on all JP hand guards

Both a Left And Right Side Single Point Sling Attachment Are Included In This Kit.