RG59/U 75 ohm Cable By The Foot - WhiteCobra Wire & Cable produces the highest quality and widest variety of flexible power cable products.

RG/6 75 ohm SAT/TV - Cable By The Foot - BlackRATING: ETL DUAL LISTED AS CM/CL2 AND CATVConstruction Parameters:Conductors: 18 AWG (1/.040) Copper Clad Steel 0.040Dielectric: Foam Polyethylene color natural 0.070 0.180Shielding: Polyester/Aluminum Fusible Tape plus 60% Aluminum Braid 0.216Jacket: PVC 0.032 0.269Electrical Properties: Cable Cross-section:(NOT TO SCALE)VALUE*Impedance (ohms): 75Capacitance (pF/ft): 17Velocity of Propagation(%): 81

22/4 Shielded Comm Cable - NMEA 0183 - Cable By The FootNEC RATING: CMP, NEC Article 800APPROVALS: (UL) C(UL) Listed or c(ETL)us ListedAPPLICATION: Indoor within ducts, plenums, and other spaces used for environmental air for (Pro Audio, Intercom Systems, Security Systems, Sound, Background Music)Construction Parameters:Conductor 22 A WG Bare CopperStranding 7 x 30Insulation Material Flex Plenum PVCInsulation Thickness 0.008" Nom.Number of Conductors: 4(2 Shielded) (2 Unshielded)Shield 100% Alum

12/3 100' Triplex Marine Wire12 AWG 3 conductor tinned-copper wire in a flat white jacket is designed for marine AC electrical connections. Features:12/3100'Triplex Marine Wire

14/2 250' Speaker WireFeatures:14/2250'Speaker Wire

10 Gauge Marine Wire - Black - 100'This product was designed to meet the requirements of Underwriters Laboratories. It can be used as internal wiring of electrical and electronic equipment, internal wiring of panels and meters, point to point, etc. Stranding is tin coated copper for corrosion resistance. Features:STRANDING: Class K Tinned CopperSTANDARD: UL 1015, UL 1230INSULATION: This product offers a unique flame retardant polyvinyl chloride compound (VW-1), and is moisture, abrasion, ac

10 Gauge Marine Wire - Red - 100'This product was designed to meet the requirements of Underwriters Laboratories. It can be used as internal wiring of electrical and electronic equipment, internal wiring of panels and meters, point to point, etc. Stranding is tin coated copper for corrosion resistance. Features:STRANDING: Class K Tinned CopperSTANDARD: UL 1015, UL 1230INSULATION: This product offers a unique flame retardant polyvinyl chloride compound (VW-1), and is moisture, abrasion, acid

12 Gauge Marine Wire - Black - 100'This product was designed to meet the requirements of Underwriters Laboratories. It can be used as internal wiring of electrical and electronic equipment, internal wiring of panels and meters, point to point, etc. Stranding is tin coated copper for corrosion resistance. Features:STRANDING: Class K Tinned CopperSTANDARD: UL 1015, UL 1230INSULATION: This product offers a unique flame retardant polyvinyl chloride compound (VW-1), and is moisture, abrasion, ac

12 Gauge Marine Wire - Red - 100'This product was designed to meet the requirements of Underwriters Laboratories. It can be used as internal wiring of electrical and electronic equipment, internal wiring of panels and meters, point to point, etc. Stranding is tin coated copper for corrosion resistance. Features:STRANDING: Class K Tinned CopperSTANDARD: UL 1015, UL 1230INSULATION: This product offers a unique flame retardant polyvinyl chloride compound (VW-1), and is moisture, abrasion, aci

14 Gauge Marine Wire - Black - 100'This product was designed to meet the requirements of Underwriters Laboratories. It can be used as internal wiring of electrical and electronic equipment, internal wiring of panels and meters, point to point, etc. Stranding is tin coated copper for corrosion resistance. Features:STRANDING: Class K Tinned CopperSTANDARD: UL 1015, UL 1230INSULATION: This product offers a unique flame retardant polyvinyl chloride compound (VW-1), and is moisture, abrasion, ac

14 Gauge Marine Wire - Red - 100'This product was designed to meet the requirements of Underwriters Laboratories. It can be used as internal wiring of electrical and electronic equipment, internal wiring of panels and meters, point to point, etc. Stranding is tin coated copper for corrosion resistance. Features:STRANDING: Class K Tinned CopperSTANDARD: UL 1015, UL 1230INSULATION: This product offers a unique flame retardant polyvinyl chloride compound (VW-1), and is moisture, abrasion, acid

Push-Pull Switch DPTT 3-Position Off-On-OnFeatures:Two-circuit push-pull switch, normally off (pull for ON)Allows (2) circuits to be operated independently with one switchHeavy-duty corrosion-resistant constructionSupplied with mounting hardware: brass face nut, washer, and hex nutInstalls in panels up to 1" thick3-PositionOff-On-OnPush Button

Marine Cut-Off Switch & LanyardMarine Cut-Off Switch and Lanyard shut off the engine if the operator falls overboard preventing a runaway boat situation.Features:Pole and Throw: SPSTEngineered to high standardsHigh-grade design delivers extended lifespanMade with premium materialsIP66 weather-resistant conforms with SAE J1455The coil cord extends to 4'3" (1.3 Meters)Additional lanyards are available by ordering part number M-598-BP

SR- Series Flange Mount - 300A Battery SwitchStainless steel hardware and tin-plated copper studs. Can be installed in locations with limited space behind the panel.Features:Isolates the batteries and eliminates battery drain when the vehicle is stored overnight or for longer periods. Electrically cuts off battery power for safety or when the vehicle is being serviced.Ignition protected to SAE J1171 and ISO 8846 for installation in a battery box or on vehicles carrying hazardous loads.Available

Continuous Duty Solenoid - 200A - 12VRelays are commonly referred to as remote-acting switches and Littelfuse manufacturers a broad range of styles to meet your application. To ensure you are utilizing the proper remote-acting switches, review the attributes in the specifications tab below against your application requirements.Specifications:Current Rating (Continuous) in Amps: 200Circuitry: SPSTNormal Position: Normally OpenContact Material: SilverHousing: Plated Steel

Metal Body Battery Disconnect Switch SPST - 6-12V2484 Series Battery Disconnect Switches are 36V Single Pole, Single Throw (SPST) manual disconnect switches that can be used to disconnect the battery from the vehicle electrical system. Disconnecting the battery from the electrical system prevents potential thermal events and ensures the system shuts down during maintenance or emergency. Battery disconnect switches also prevent parasitic loads from draining the battery during inactivity.Features:

Continuous Duty Reversing Solenoid - 12V DPDTA combination of two solenoids in one package to reduce cost and maximize space savings while also providing simpler wiring. Two integral solenoids provide dynamic braking for permanent magnet motors when neither coil is energized. This intermittent duty solenoid can be used at a variety of amperages. Specifications:Current Rating (Continuous) in Amps: 75Circuitry: DPDTContact Material: CopperHousing: Plastic

3-Position Heavy-Duty Ignition SwitchIgnition Switches are designed for universal applications within harsh environments. Their mounting, body, and actuator features are designed for ease-of-use and extended product lifecycle.The 956 Heavy Duty Series is our most robust series of Ignition Switches, providing reliable circuit control for vehicle ignition.Features:Key removable in “Off” Position Only (where actuator applicable)Ignition Proof to SAE J2595 screw terminalsCoded lock and

Heavy-Duty Toggle Switch SPST On-Off 2-WireToggle Switches are designed for universal applications within harsh environments. Their mounting, body, and actuator features are designed for ease-of-use and extended product lifecycle. The Standard Heavy Duty Toggle Switch Series is our most robust series of toggle switches, available in several configurations of actuators and circuitries.Specifications:Mounting: Nickel Plated Brass Face Nut through 15/32 (11.90mm) Panel Hole *Part Number 5520: Black

Continuous Duty Solenoid 65 Amp 12V UL ListedRelays are commonly referred to as a remote-acting switches and Littelfuse manufacturers a broad range of styles to meet your application. To ensure you are utilizing the proper remote-acting switches, review the attributes in the specifications tab below against your application requirements.Features:65 Amp12VCopper Contact Stud MaterialSteel Coil Stud MaterialNormally Open Contacts

Single Pole Brass Battery Switch with Faceplate 175 Amp Continuous 800 Amp IntermittentMarine-Grade UL-Listed master disconnect switches. Features:6-36 VDC175 Amp Continuous 800 Amp Intermittent2 PositionsOff-On PositionsSingle-Pole CircuitryBrass CaseLever Actuator

3 Position Sealed Ignition SwitchAn extensive series of ignition switches that can also be used as rotary switches.Made of rugged engineering grade plastic, these switches stand up to mechanical shock and vibration, and will not corrode or rust. Has an integral Deutsch-type socket to make electrical connection quick and easy, and to exclude moisture and dust.UL-recognized. tested to SAE J259 for ignition switches.Suitable for a broad range of voltages: 10A at 12V, 5A at 24V, 3A at 36V and 2A at

3 Position Brass Ignition SwitchMarine Grade Ignition Switches in brass or plastic. Off-Ign-Ign/Start, spring return to Ign. Key removable at Off. 

3 Position Brass Ignition Switch with Rubber BootMarine Grade Ignition Switches in brass or plastic. Off-Ign-Ign/Start, spring return to Ign. Key removable at Off.

2 Position Brass Ignition SwitchMarine Grade Ignition Switches in brass or plastic. Off-Ign-Ign/Start, spring return to Ign. Key removable at Off.

Sealed Rocker Switch w/Small Round Pilot Lights SPST On-Off 3 ScrewThese general purpose switches are suitable for many kinds of applications. Features:25A at 12V DC. LED or incandescentWeather-resistant with contact areas sealed to IP66 (high pressure wash resistant)Switches snap into standard rocker switch holes 1.45" x 0.830" (36.8 x 21.1mm) in panels from 0.09" to 0.19" thick (2.4 x 4.7mm)They have silver contacts, which give superior switching performanceHousing is matte black

Sealed Rocker Switch w/Small Round Pilot Lights SPST On-Off 3 BladeThese general purpose switches are suitable for many kinds of applications. Features:25A at 12V DC. LED or incandescentWeather-resistant with contact areas sealed to IP66 (high pressure wash resistant)Switches snap into standard rocker switch holes 1.45" x 0.830" (36.8 x 21.1mm) in panels from 0.09" to 0.19" thick (2.4 x 4.7mm)They have silver contacts, which give superior switching performanceHousing is matte blackSingle Po

Sealed Rocker Switch w/Small Round Pilot Lights SPDT On-Off-On 4 BladeThese general purpose switches are suitable for many kinds of applications. Features:25A at 12V DC. LED or incandescentWeather-resistant with contact areas sealed to IP66 (high pressure wash resistant)Switches snap into standard rocker switch holes 1.45" x 0.830" (36.8 x 21.1mm) in panels from 0.09" to 0.19" thick (2.4 x 4.7mm)They have silver contacts, which give superior switching performanceHousing is matte blackSingle

Sealed Rocker Switch Non-Illuminated SPST On-Off 2 ScrewFeatures:20A at 12V DC, 10A at 24V DCSealed to IP66 for water resistance. (high pressure wash.)Single Pole, Single ThrowTwo Brass Screw Terminals

Sealed Rocker Switch Non-Illuminated SPDT On-Off-On 3 BladeFeatures:25A at 12V DC, 15A at 24V DCSealed to IP66 for water resistance (high pressure wash.)Single Pole, Double ThrowThree brass blade terminals

Sealed Rocker Switch Non-Illuminated SPDT (On)-Off-(On) 3 BladeFeatures:25A at 12V DC, 15A at 24V DCSealed to IP66 for water resistance (high pressure wash.)Single Pole, Double ThrowThree brass blade terminals

Sealed Rocker Switch Non-Illuminated DPDT On-Off-On 6 BladeFeatures:25A at 12V DC, 15A at 24V DCSealed to IP66 for water resistance (high pressure wash.)Double Pole, Double ThrowSix brass blade terminals

Sealed Toggle Switch SPST On-Off 2 WireFeatures:25A at 12V DC, 15A at 24V DCCompletely sealed to IP68 with O-ring seal and epoxy seal – can be mounted anywhere on the vehicle!Silver contacts ensure long lifeTwo wire leads

Sealed Toggle Switch SPST (On)-Off 2 WireFeatures:25A at 12V DC, 15A at 24V DCCompletely sealed to IP68 with O-ring seal and epoxy seal – can be mounted anywhere on the vehicle!Silver contacts ensure long lifeTwo wire leads

Sealed Toggle Switch SPDT On-Off-On 3 WireFeatures:25A at 12V DC, 15A at 24V DCCompletely sealed to IP68 with O-ring seal and epoxy seal – can be mounted anywhere on the vehicle!Silver contacts ensure long lifeThree wire leads

Sealed Toggle Switch SPDT On-On 3 WireFeatures:25A at 12V DC, 15A at 24V DCCompletely sealed to IP68 with O-ring seal and epoxy seal – can be mounted anywhere on the vehicle!Silver contacts ensure long lifeThree wire leads

Sealed Toggle Switch SPDT (On)-Off-(On) 3 WireFeatures:25A at 12V DC, 15A at 24V DCCompletely sealed to IP68 with O-ring seal and epoxy seal – can be mounted anywhere on the vehicle!Silver contacts ensure long lifeThree wire leads

Heavy-Duty Long Handle Toggle Switch SPST On-Off 2 BladeFeatures:Up: On, Down: OffTwo blade terminalsLong handleFor universal applicationSilver contactsMounting stem is nickel-plated brass, 15/32" -32 thread, 15/32" long (11.9mm). Fits panels up to 9/32 (7.1mm)Phenolic housing with plared steel cap. Nickel-plated brass hardwareBlade terminals are.250 quick-connect. 25A at 12V, 15A at 24V, 10A at 36V DC

Compact Battery Switch - 150AUpgraded design with bigger contacts (M10) and improved components for heavier 150A current loads even if keeping the compact dimensions, which make it one of the more popular products for 12V applications. Features a removable handle with a plastic body. Rubber cap is included for protection while switch is removed from the socket. Specifications:Actuation Type: Lever KeyTerminal Gender: MaleThrow Type: SingleAmperage (A): 150 AmpNumber of Terminals: 2Terminal

Heavy Duty Toggle Switch DPST On-Off 4-ScrewCole Hersee's Heavy Duty DPST Toggle Switch, 4 Screw Terminals, 25 A Standard or long handle. Universal application. Silver contacts. Mounting stem is nickel-plated brass 15/32" -32 thread, 15/32" (11.9mm) long, and fits panels up to 9/32" (7.1mm) except where stated otherwise. phenolic housing, with plated steel cap. Nickel-plated brass mounting hardware. Blade terminals: .250 quick connect. Screw terminals: 6-32 screws. 25A at 12V, 15A at 24V, and 10