The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements.Features:All-new sleek, modern designFirst all modular system - extremely versatileSimple selection and installationEasy to add accessoriesPowder coated aluminumRequires Vision Mounting Plate to install radar or sat dome antenna18" Aft Angled Mount18" tallAft Raked 30 degrees

The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements.Features:All-new sleek, modern designFirst all modular system - extremely versatileSimple selection and installationEasy to add accessoriesPowder coated aluminumRequires Vision Mounting Plate to install radar or sat dome antenna6" Vertical MountCompatible with Vertical Radars, Satellite Domes, Dome Lights, and Night/Thermal Vision Cameras6" Ta

The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements.Features:All-new sleek, modern designFirst all modular system - extremely versatileSimple selection and installationEasy to add accessoriesPowder coated aluminumRequires Vision Mounting Plate to install radar or sat dome antenna12" Vertical MountCompatible with Vertical Radars, Satellite Domes, Dome Lights, and Night/Thermal Vision Cameras12"

The Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solutions to your electronics mounting requirements.  Dual Mount for a Radar Dome and a Satellite Dome. Two Mounting Plates required. Features:All-new sleek, modern designFirst all modular system - extremely versatileSimple selection and installationEasy to add accessoriesTwo marine electronics mounting platformsPowder coated aluminumRequires Vision Mounting Plate to install radar or sat

The Mast Mount is designed to fit multiple specific manufacturers Radomes and Satellite Antennas.  It is constructed from lightweight aluminum and is powder-coasted white for a durable finish.  For fast and accurate installation Edson designed mounting feet that can be properly secure to a wide range of mast profiles. One Mounting Plate is required to complete the Edson Vision SeriesMast Mount System. Features:Rugged DesignMarine-grade aluminum constructionPowder-coated whiteRivets inc

Universal Mounting PlateWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's Universal Mounting Plate fits most brand and models 2kW, 4kW and Braodband Radars. Specifications:Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mounts sold separately

Garmin 4ft Open Array Mounting PlateWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68560 Vision Series Mounting Plate is designed for Garmin 4ft Open Array Radars (GMR 424 xHD2, GMR 624 xHD2, GMR 1224 xHD2, GMR 2524 xHD2, GRM Fantom 4). Specifications:Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mounts sold separately

Garmin Mounting Plate for 18" & 24" HD, xHD, HD+ 4kW Radar domesWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68520 Vision Series Mounting Plate is designed for Garmin 18 and 24 Radar Domes (GMR Fantom 18, GMR Fantom 24, GMR 18 HD+, GMR 18 xHD, & GRM 24 xHD). Specifications:Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mounts sold separately

Simrad/ B&G/ Lowrance 4KW Radar Dome Mounting PlateWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68540 Vision Series Mounting Plate is designed for Simrad, Northstar, B&G, & Lowrance 4kW, HD, 3G, & 4G Radar Domes (LRA-2400, NS007002, DX64S-1). Specifications:Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mounts sold separately

Simrad/Lowrance/ B&G 2kW & 4G Radar Domes Mounting PlateWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68530 Vision Series Mounting Plate is designed for Simrad, Northstar, B&G, & Lowrance 2kW, HD, 3G, & 4G Radar Domes (LRA-1800, NS007001, DX42S-1). Specifications:Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mounts sold separately

Simrad/Lowrance/B&G/Sitex 4' Open Array Mounting PlateWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68570 Vision Series Mounting Plate is designed for Simrad,  B&G,  Lowrance, and Sitex 4ft Open Arrays (TX06S1, NS007003). Specifications:Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mounts sold separately

Intellian/KVH/Raymarine/Sea King/SeaTel Mounting PlateWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68600 Vision Series Mounting Plate is designed for Raymarine 33STV & 37STV , Sea-King 15, SeaTel C14, Intellian i1, i2, &i3, and KVH M1, M2, M3, V3, TV1, TV3.Specifications:Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mounts sold separately

Intellian/KVH/Raymarine/Sea King/SeaTel Mounting PlateWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68590 Vision Series Mounting Plate is designed for Intellian i4, k4, d4, Raymarine 45STV, Sea King 18, SeaTel C18 & C24, KVH M5 & TracPhone 50, & TV5. Specifications:Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mounts sold separately

ACR Mounting PlateWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68680 Vision Series Mounting Plate is designed for ACR Cobham RCL-100 Series & RCL-50 Series. Specifications:Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mounts sold separately

FLIR Mounting PlateWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68710 Vision Series Mounting Plate is designed for year 2016 and older FLIR M-Series (M-324XP, M-625XP, M-324L, M-625L, M-612L, M-618CS, M-324S, M-324CS, M-625S, M-625CS, M-617CS, M132, M232)  and year 2016 and older Raymarine T300 & T400 fixed Mount Pan/Tilt Thermal Cameras.Specifications:Mounting Plates are required to complete an Edson Vision

Light Arm Receiver for Aft Angled MountsThe Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Aft Angle Mounts. Edson's Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount.Specifications:Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mounts sold separately

Light Arm for Radar Domes and Sat DomesEdson's 68650 Vision Series Light Arm allows you to attach your Navigation Light to your Edson Vision Series Mount with a Radar Dome and Satellite Dome. Light Arm extends 14" toward the stern allowing room for your Radar or Satellite Dome. The Light Arm is 28" tall, which meets Coast Guard standards for navigation lights.Edson's Light Arm requires a Light Arm Receiver that is dependent on the style of Vision Series Mount you have (Aft Angled or Vertica

Light Arm for Open Array RadarsEdson's 68660 Vision Series Light Arm allows you to attach your Navigation Light to your Edson Vision Series Mount with a Open Array Radar. Light Arm extends 28" toward the stern allowing room for your Radar or Satellite Dome. The Light Arm is 28" tall, which meets Coast Guard standards for navigation lights.Edson's Light Arm requires a Light Arm Receiver that is dependent on the style of Vision Series Mount you have (Aft Angled or Vertical). Specifications:Mo

Perko Combination Anchor/Steaming Light (50" Wire Length)Edson offers the 67500 Perko Combination Anchor/Steaming Light (50" Wire Length) that is specifically designed for Edson's Vision Series Light Arms. All-Round White Light with 12 volt bulb and is constructed of Black Polymer and Chrome Plated Zinc Alloy Top. Certified For Use on Sail or Power Driven Vessels Under 20 Meters (65.6 ft.) in LengthThe 67500 Perko Combination Anchor/Steaming Light req

GPS Mount with Light Extension AdapterEdson's 67400 GPS Mount with Light Extension Adapter is specifically designed for Edson's Vision Series Light Arms. The  powder coated stainless steel GPS Mount allows you to add a GPS antenna to your Light Arm. The GPS Mount also has an extension to attach your navigation anchor/steaming light. *Shown with optional Perko Anchor/Steaming Light. Must be ordered separately.*The 67400 GPS Mount with Light Extension Adapter requires an Edson Light

Wedge kit for 0-4 degree angle adjustment - 7" diameterWhile underway, the bow of your powerboat tends to ride at an elevated angle, causing your radar to be angled. With Edson's 67550 0-4 degree Wedge for Round Base Vision Mounts the elevated bow will be offset aligning your radar to see better. Edson's 0-4 Degree Wedge requires an Edson Mounting Plate and an Edson Vision Series Mount. Specifications:Base Mount and Mounting Plate sold separately**NOTE: ONLY COMPATIBLE with Vertical Round B

PowerKnob Sportsman - BlackThe Ultimate In Steering Control!The rugged and economical Sportsman Series PowerKnob features the same ball-bearing design and ergonomic shape as the ProSeries. The Sportsman Series Knob is built of black polymer and marine-grade stainless with precision milled bearing races.Feataures:Improves handling and performanceManeuver with precision and confidenceTwin races of fast action ball bearingsAll-weather constructionStrap or bolt onto virtually any steering wheelSmoo

PowerKnob ProSeries - StainlessThe Ultimate In Steering Control!Edson's classic Stainless PowerKnob is hands-down the best available on the market today. This is the one accessory you won't know how you lived without.Features:Improves handling and performanceManeuver with precision and confidenceTwin races of fast action ball bearingsAll-weather constructionStrap or bolt onto virtually any steering wheelSmooth ball bearingsEasy 5 minute installIdeal For:BoatsTractorsGolf CartsOff-RoadMaintenanc

ComfortGrip PowerKnobWe've taken all the features of our proven Stainless PowerKnob and added rubber finger grips for even greater comfort and control! Soft rubber insert will stand up to the harshest environments without cracking or discoloring. A great addition to any wheel, it particularly compliments our ComfortGrip Steering Wheel.

Light Arm Receiver f/Vertical MountsEdson's 68790 Light Arm Receiver secures a Light Arm to the mounting plate on Edson Vision Series Vertical Mounts. Edson's Light Arm Receivers require an Edson Mounting Plate and an Edson Vision Series Mount. Base Mount and Mounting Plate sold separately.

Vision Series Univeral Mounting Plate - 10-5/8" Diameter with No HolesWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's Vision Series Universal Mounting Plate is 10-5/8" diameter without pre-drilled holes. You drill your own holes to fit any antenna or dome.Mounting Plates are required to complete an Edson Vision Series Mounting Series.Order Base Mount separately.

Vision Series Mounting Plate f/FLIR MD SeriesWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68721 Vision Series Mounting Plate is designed for FLIR MD-Series Fixed Mount Thermal Cameras (MD-324 & MD-625). Mounting Plates are required to complete an Edson Vision Series Mounting Series.Base mount sold separately. 

Forespar STA-Plug® Emergency Plug - 5" x 9" - Plugs Holes up to 3.5"STA-Plug is a soft, cone shaped plug designed to conform to the irregular and unpredictable shapes of a hull breach - controlling the flow of water while you pump.Whether it's a round hole caused by mechanical failure, or an elongated tear due to impact, STA-Plug adapts to slow or stop the leak.  Unlike old fashioned wooden plugs, STA-Plug's unique shape allow it to be compressed by hand or cut to fit. It also gets in t

One-Step Boarding Step w/LineIf the deck of your boat seems to be getting higher and your dinghy seems to be getting lower, get Edson's "One-Step Boarding Step". Edson makes getting onboard safer and easier. Cast in aluminum and coated with durable, glossy-white baked-on Urethane coating, this Step is designed to attach to your lifeline gate stanchions and hang against the side of your boat. It has neoprene bumpers that won't mar your topsides, and the built-in handles give you a secure handhold

Vision Series Mounting Plate for Simrad HALO™ Open Array - Hard Top OnlyThis powder coated marine-grade aluminum plate is used to mount a Simrad HALO™ Open Array on a hard top. The lifted mounting surface prevents drilling through an internal center conduit on many hard tops. This product is used independently and is not compatible with the other Vision Series Mounts and Plates.

Vision Series Mounting Plate for Simrad HALO™ Open ArrayEdson's Vision Series Mounting Plate allow the Simrad HALO™ to be mounted on a hard top or any of Edson's heavy duty mounts. If you wish to use one of the Edson Vision Series MOunts, available in single, double and triple mount configurations, the HALO™-specific mounting plate fits right into Edson's existing family.The Vision Series Mounting Plate is made from marine-grade aluminum and finished with a white powder-coat. T

Stainless GPS Mount 3" Mounting Base 1-1.25" RailEdson's Stainless GPS Arm puts your hand-held GPS securely and conveniently within reach on your Steering Pedestal Guard. The Arm is constructed of highly polished, investment-cast 316 Stainless and the mounting base is made of black, maintenance-free marine-grade polymer. Pre-drilled to fit the Garmin GPS Swivel Mount, the Arm will also accept most other round GPS brackets up to 5" (12.7 cm) including Magellan and other Garmin units.The Edson GPS

Stainless GPS Mount 5" Mounting Base 1-1.25" RailEdson's Stainless GPS Arm puts your hand-held GPS securely and conveniently within reach on your Steering Pedestal Guard. The Arm is constructed of highly polished, investment-cast 316 Stainless and the mounting base is made of black, maintenance-free marine-grade polymer, that Will also accept most GPS brackets up to 5" (12.7 cm) including Magellan and Garmin units.The Edson GPS Arm is designed to attach to all 1", 1-1/8" and 1-1/4" pedestal guar

Vision Series Mounting Plate f/Raymarine Quantum, 2kW & 4kW Radar DomesWith Edson's Vision Series Mounting System, you can select your desired Mounting Plate to best fit your electronics. Edson's 68551 Vision Series Mounting Plate is designed for Raymarine Radar Domes (Quantum, Quantum 2, RD418D, RD424D, RD418HD, RD424HD). Mounting Plates are required to complete an Edson Vision Series Mounting System. Base mount sold separately. 

Vision Series Mount - 6" Aft Angled - Heavy Duty for Open Array RadarsThe Vision Series Mounting System is a revolutionary design that provides the simplest, most attractive solution to your electronics mounting requirements.Features:All-new sleek, modern designFirst all modular system - extremely versatileSimple selection and installationEasy to add accessoriesPowder coated aluminumRequires Vision Mounting Plate to install radar or sat dome antenna6" Heavy Duty Aft Mount 6" TallAft raked 30 deg

Vision Series Mounting Plate for Raymarine T300 & T400 Thermal Cameras and Flir M-Series- Year 2017 and NewerWith Edson's Vision Series Mounting System once you have selected the mount you want to install your electronics to you must select the corresponding plate that has the correct bolt pattern for your electronics. Edson's 68600 Vision Series Mounting Plate is designed for Year 2017 and NEWER Raymarine T300 & T400 fixed Mount Pan/Tilt Thermal Cameras and FLIR M-Series (M-324XP, M-625

ComfortGrip™ 8"- 3-PackEdson’s iconic ComfortGrip™, now in 8” adhesive strips! Designed to fit on 1” to 1.25” diameter railings, these tactile grips will ergonomically cushion fingers while providing a secure hold. A high-performance Santoprene construction and a 3M Adhesive ensures these grips can withstand the harshest conditions!The 8" ComfortGrip™ include three grips to fit just about any application.  By adding a comfortable ergonomic grip with

ComfortGrip™ 12"- 3-PackEdson’s iconic ComfortGrip™, now in 12” adhesive strips! Designed to fit on 1” to 1.25” diameter railings, these tactile grips will ergonomically cushion fingers while providing a secure hold. A high-performance Santoprene construction and a 3M Adhesive ensures these grips can withstand the harshest conditions!The 12" ComfortGrip™ include three grips to fit just about any application.  By adding a comfortable ergonomic grip w

Stainless Steel Pedestal Guard Mounting Feet - PairEdson Pedestal Guard Mounting Feet are available in pairs as a direct replacement for Edson’s black plastic feet. Gasket and bushing allow for mounting 1”, 1-1/8” or 1-1/4” guard pipes. Nuts and washers included.

16" Stainless Steel Comfort Grip Steering Wheel - 3/4" - Tapered ShaftEdson's ComfortGrip Power Wheels feature an ergonomically-designed rubber finger grip insert that provides precise control and exceptional comfort.