Tsunami Mk2 T500 Aerator KitThis aerator kit is recommended for fishing boats with built-in livewells that are not equipped with a thru-hull recirculation system. The pump is sealed and can be occasionally submerged; however, the electrical wires must never be submerged.Kit Includes:Aerator spray headSS wire mesh strainer PumpStraight outlet fitting Hose Two hose clampsSpecifications:Pump Model: T500Flow Gal/HR: 500Amp Fuse: 3Outlet Hose Inner Diameter: 3/4” (19mm)Two hose

Tsunami Mk2 T500 Aerator - 12V - Straight InletKeep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.Features:3-1/2 in. x 3/4 in. thru-hullFlexible installation with both 90 and straight inlets and outletsFull backward compatibility with previous Tsunami modelsFaster, smarter installation with no sealant or tools is requiredSpec

Tsunami Mk2 T1200 Aerator - 12V - 1" NPT InletKeep bait and fish alive with the Tsunami Aerator Mk2. Attwood’s leading fish-friendly technology is making it easier to install and service while offering new installation options never provided by the Tsunami range.Features:7/8" x 1" seacockFlexible installation with both 90 and straight inlets and outletsFull backward compatibility with previous Tsunami modelsFaster, smarter installation with no sealant or tools is requiredSpecifications:Fl

Swivl-Eze Seat Swivel 7" Black with 3° TiltSwivl-Eze has the boating experience to deliver all the kinds of accessories you want.Features:360° ball-bearing seat swivel (requires weight or pressure to turn)5-1/4" universal mounting hole patternTilt Angle: 0°Black powder coat finish

WaterBuster® Portable PumpPart #: 4140-4This patented, submersible pump is a great way to remove unwanted water from boats, pool covers, aquariums and sump pits. Convenient and safe, too, because it needs no electrical cord - runs up to 5 hours on three alkaline D batteries. Excellent for use as a portable pump-out device for paddle boats, inflatables, duck boats, dingies and kayaks. Any craft that lacks a hard-wire, permenent electrical system.Features:6-3/8" high x 5-1/4"Pumps up to 200 ga

Turbo 3000 Series In-Line BlowerPart #: 1733-4The first vane axial-flow fan bilge blowers designed using aerospace technology to maximize performance. No other bilge blowers in the industry provide such powerful system output at such a low power input in a compact size.Patented in-line design - provides ventilation for engine compartments, galleys, bilges, and heads. Mounting feet allow vertical or horizontal installation in confined spaces. Install with #10 fasteners. Individual carton includes

Paddle ClipsAttwood's Paddle Clips keep your paddle secure to your boat for freeing up both hands or resting from paddling and fits 1" diameter shafts.Features:Fits paddles 1" diameterColor: BlackSet of 2Comes with stainless steel mounting hardware

Trailer Bunk PaddingAttwood's Trailer Bunk Padding is easy to cut and custom fit to your trailer. Comes in a 12' long roll of durable 8" wide bunk padding. Made out of weather resistant polypropylene marine carpet. Protects your boat from scratches and abrasion.Acrylic backing grips surfaceMade for minor water retentionCharcoal color

TM Quick ConnectorsAttwood's Trolling Motor Quick Connectors is the safe and easy quick connect / disconnect system from your trolling motor to your battery. For use where a plug and socket cannot be used. Heavy duty 10-gauge connector.Replaces battery clips2-connector kitSafe and easySemi-gloss finish

Heavy Duty Adjustable Rod HoldersFeatures an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180x vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods. Includes Combo Mount.

Stainless Steel Flush Mount Rod Holders - Closed End2" Diameter9" LengthAttwood stainless steel rod holders meet the need for the finest in finish, function and durability.Polished 316 grade stainless steel tube for corrosion-resistanceGasket Provides water seal around flangeOptional, U.V. resistant, Cover Cap/Gasket closes tube when not in useU.V. resistant polymer liner protects finish on rod or reelWARNING: This product can expose you to chemicals which are known to the State of California to

Clamp-On Ski MirrorUniversal mount fts up to 1/2" thick window frames and adjusts easily to meet most boat applications. Curved mirror provides a wide feld of view. Soft touch mounting clamps protect windows and frames. Zinc plated hardware and powder coated shaft assemblyWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Anchor Ring & RopeAssists in anchor retrieval. Designed to lift anchor systems up to 80lbs where 10' or more of anchor chain is used. Lifting capacity based on anchor buoy size. *Buoy sold separately.

6" Fold-Down Dock CleatLow-profile cleats simply fold-down when not in use and flip back up when it comes time to tie off.Features:Ideal for small boats and watercraftLow-profile, fold-down design keeps cleat clear of dock trafficMarine-grade aluminum protected with corrosion resistant finishEasy to install on all dock typesRequires two standard 3/8" carriage bolts (not included)

8" Fold-Down Dock CleatLow-profile cleats simply fold-down when not in use and flip back up when it comes time to tie off.Features:Ideal for small boats and watercraftLow-profile, fold-down design keeps cleat clear of dock trafficMarine-grade aluminum protected with corrosion resistant finishEasy to install on all dock typesRequires two standard 3/8" carriage bolts (not included)

Rope LadderAttwood's 5-step, white boarding ladder. Sturdy 11-3/4" blow molded steps, textured step surface and steps connecting by a nylon rope with a top loop to secure to a cleat or a railing.Features:Non-anodized aluminum tubingPolyethylene steps11" hooks and support legsFolds flat for storageSturdy 11-3/4" blow molded stepsTextured step surface for sure footingSteps connected by a nylon rope with top loop that quickly secures to cleat or railingWARNING: This product can expose you to chemic

Fender Cleat - 3-1/2"The perfect compliment to the Attwood Neat Cleat, the Fender Cleat allows you to easily secure fenders to your boat with a simple lift. This retractable cleat is made of durable, enhanced cast 316 stainless steel it's simple design assures long-life and dependable operation. Total Length: 3-1/2"Total Width: 1-3/16"Above deck-lowered/closed): 9/16" Above deck- raised/open: 1-3/8"Maximum Line Opening (adjusting heights): 3/4"Install Depth: 1-7/8"Mounting Hole Distanc

3.5lb Grapnel Anchor SystemThis 3.5lb anchor will hold your PWC, canoe, dinghy, kayak, or float tube in sand, mud, gravel, and rock. Includes 25' of rope, marker buoy, giant snap hook, anchor and a durable nylon storage case that protects your boat from scratches.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Fold-Up Drink Holder - Dual Ring - BlackHolds coffee mugs with a handle, 12-ounce cans, or drink insulators. Mount quickly and easily on boats or RVs. Flip the small ring up to hold small drinks; for large drinks, flip the small ring down and use the large ring. When not in use, flip rings down and close the cover for convenient storage. 7/8" closed depth. Four holes for #10 screws.

Replacement Shower Head Sprayer f/Aft-Deck ShowerReplacement shower head only

Neat Cleat Stainless Steel - 6"A retractable stainless steel cleat with a thin profile that installs easily. Spring loaded stay up design. Each stanchion is a 7/8 in. stainless steel rod. Drainage receptacles (included) capture moisture and send it to the bilge via pitot tubing (not included). Installation is simple even on narrow gunwales - just drill twice with an appropriate size hole saw.Features:Depth: 3-1/8 in.Height: 1-5/8 in. (lowered)Backed by a lifetime warranty against corrosionSize:

Sahara MK2 S800 Bilge Pump 800 GPH - 12V - AutomaticEngineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals.Features:Sahara Mk2 is the only automatic bilge pump that eliminates air-locks Patented X-Air™ Impeller ejects trapped air in the pump and pipework.Sahara Mk2 is the easiest automatic bilge pump to install and service External mounting feet a

Sahara MK2 S800 Bilge Pump 800 GPH - 24V - AutomaticEngineered for extended service life, these pumps feature a cool-running design and quality components, including permanent magnet motors, stainless steel shafts, and steel-reinforced seals.Features:Sahara Mk2 is the only automatic bilge pump that eliminates air-locks Patented X-Air™ Impeller ejects trapped air in the pump and pipework.Sahara Mk2 is the easiest automatic bilge pump to install and service External mounting feet a

LakeSport 2-3/8" Extension Post - 13" HighFixed height lake sport Series pedestal seat extension post 238613L1 is 13 inches high. A great extension post for 238 lake sport seat mounts and socket bases. For use on fishing, pontoon, or cruising boats to provide seat elevation. Attwood develops high-value, engineered marine products to make life on the water easier to enjoy. Made to meet the demands of boat builders and distribution partners, our products are extensively tested on-site in our lab t

316 Stainless Steel Alloy Flush Mount Fuel Vent - 90° VentOn the exterior, they have a smooth edge over the competition. Unlike some others, there is no protruding cap to cause damage or be damaged by hull bumps and scrapes. Cap unscrews with a hex head wrench for easy cleaning of the filter and pressure testing of the entire fuel system. These vents now include two silicone gaskets.Features:90-degree ventSpecifications:Hose Size (inch): 5/8" inner diameterMaximum Hull Thickness (inch): 7/8

Tsunami MK2 Manual Bilge Pump - T1200 - 1200 GPH & 24VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service GPH (Gallons Per Hour): 120090° rotatab

Stainless Steel Scupper Valve Barbed - 1-1/2" Hose SizePolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction:Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistanceAll visible areas are polished to a mirror finish, then passivate each part for additional protectionThick steel sidewalls withstand continual stress and hose fle

White Plastic 90 Degree Thru-Hull Connector - 1-1/8" Inner Diameter90° Thru-Hulls are ideal for tight installations, such as livewell overflow drains. The angled design also eliminates hose kinking.Specifications:Fits Hose Size: (inch) 1-1/8"inner diameterMax Hull Thickness: (inch) 1-7/8"Flange Diameter: (inch) 2-7/16"Installation Hole Size: (inch) 1-5/16"Drain Plug: (inch) 7/8"Color: White*Plastic Thru-Hull Connectors are designed for installation above the water line only

Stainless Steel Garboard Drain Plug - 7/8" DiameterThe Garboard Drain Plug is a threaded removable plug, which has a retention system that keeps the plug from getting lost. Features:High-polished #316 stainless steel reduces corrosionLarge 7/8" (27mm) hole for servicing stern drives*Gasket not included

Primer Bulb - 3/8" Inner Diameter HoseThis Atwood Primer Bulb is engineered and constructed to deliver the most reliable priming and long-term leak-free performance. The exclusive three-layer construction prevents collapse under vacuum and prevents ballooning or bursting under pressure. The low-permeation material prevents fuel evaporation, and this bulb delivers 60 percent more output per pump than leading competitors.Features:It is intended for use with a 3/8-inch interior diameter hoseEx

Universal Brass Fuel Hose Fitting - 1/4" NPT x 5/16" Barb This Attwood Fuel Tank Fitting is a dependable replacement for original equipment and provides a sure connection in a fuel line.Features:Fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuelsMaterial Construction: BrassMale thread, hose barb(inch) Male 1/4" NPT x 5/16" Barb *Use thread sealant on all threads

Deck Fill for Carbon Canister System - Straight Body & Scalloped Stainless Steel CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to

90° P-Trap Fuel Tank Vent - Flush Mount - Black with Stainless Steel Vent HeadThis Attwood 90-Degree P-Trap Fuel Tank Vent reliably helps prevent water from entering the fuel tank while still allowing air to vent freely during normal sea conditions and washdowns. This vent’s effectiveness. eliminates the need for an anti-siphon loop in the vent hose. This is a flush mount vent for use with a 5/8-inch interior diameter hose. It requires a 1-3/8-inch installation hole and can be used wit

Compact Carbon CanisterCarbon canister systems utilize an engineered charcoal canister to reduce hydrocarbons entering the atmosphere. Other components of a carbon canister system are designed to ensure the tank fills to the proper level every time without spit-back or well-back. All Attwood carbon canister systems are designed to ensure liquid fuel or water does not reach the canister and are compatible with Jerry Can and marine nozzle refueling.Features:This is a single pack that contains two

Deck Fill for Pressure Relief Systems - Straight Body & Scalloped Stainless Steel CapPressure relief systems are designed with automatic diurnal emission control and overpressure relief safety valves built into the cap of the fill. The overpressure relief safety valves are engineered to release pressure above 1 psi. The high-flow vacuum valves allow fresh air to enter the fuel tank to replace the fuel being consumed by the engine. Other components of a pressure relief system are designed to

Fuel/Oil Mixing BottleAllows the addition of the exact amount of oil required for a 2-cycle engine. Oil level marks are in gallons and liters. Determines ratios for 100:1, 50:1, 24:1 and 10:1 mixes. Wide mouth, quart-size bottle.Features:Markings to mix oil for 2 Cycle engineConvenient wide-mouth, quart-size bottleClear oil level marks in black

Portable Fuel Tank - 3 Gallon with GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 3-gallon tank is perfect for small outboards. Includes gauge.Features: 3 Gallon fuel capacityCompatible with 1/4-inch NPT fuel fittingsHigh-Contrast, easy to read gageAdditional oil and ullage/vapor capacityEPA Cap with automatic, high-flow vacuum valveUV-grade multi-la

Portable Fuel Tank - 12 Gallon with GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed. Includes gauge.Features: 12 Gallon fuel capacityCompatible with 1/4-inch NPT fuel fittingsHigh-Contrast, easy to read gageAdditional oil and ullage/vapor capacityEPA Cap with automatic, high-

Portable Low Profile Fuel Tank - 12 Gallon with GaugeAttwood has engineered the industry’s only comprehensive EPA-certified fuel tank-to-engine solution. Tough materials and innovative design stand up to harsh marine conditions. A 12-gallon tank is ideal for pontoon boats where more fuel capacity is needed. Includes gauge and low profile save space.Features: 12 Gallon fuel capacityCompatible with 1/4-inch NPT fuel fittingsHigh-Contrast, easy to read gageSave space; the low profile is

Letter & Number Kit - WhiteFeatures:3-inch, waterproof vinyl, pressure-sensitive labelsResists fuel, fading, and scratchesKit contains (White Pieces): Four of each letter and number, plus twelve dashes totaling 148 pieces*Meets USCG guidelines