Garboard Drain Plug Cast BronzeAttwood's Bronze Garboard Drain Plug reliably provides bilge drainage when hauling out, and it seals securely when not draining. It has machined and tapered pipe threads to ensure a watertight plug fit, and the nut can be removed with a wrench or pliers. This drain plug has a 3/8-inch neck depth and a ½-inch NOT drain. It installs easily and securely using #8 screws in 3 countersunk holes.

Replacement Cartridge for Tsunami 500 MK2Attwood replacement motor cartridge for T500 model Tsunami series bilge pumps. Sold per each.

Replacement Cartridge for Tsunami 1200 MK21200 GPH Replacement Attwood Tsunami motor cartridge. For use with Attwood Tsunami MK2 (56 series) Bilge and Aerator pumps. Attwood Tsunami MK2 motor cartridge eliminates air locks.Features:1200 GPH Replacement Attwood Tsunami motor cartridgeFor use with Attwood Tsunami MK2 (56 series) Bilge and Aerator pumpAttwood Tsunami MK2 motor cartridge eliminates air locks

316 Stainless Steel Alloy Flush Mount Fuel Vent - Straight Vent On the exterior, they have a smooth edge over the competition. Unlike some others, there is no protruding cap to cause damage or be damaged by hull bumps and scrapes. Cap unscrews with a hex head wrench for easy cleaning of the filter and pressure testing of the entire fuel system. These vents now include two silicone gaskets.Features:Straight VentSpecifications:Hose Size (inch): 5/8" inner diameterMaximum Hull Thickness (inch): 7/

316 Stainless Steel Alloy Flush Mount Fuel Vent - 90° VentOn the exterior, they have a smooth edge over the competition. Unlike some others, there is no protruding cap to cause damage or be damaged by hull bumps and scrapes. Cap unscrews with a hex head wrench for easy cleaning of the filter and pressure testing of the entire fuel system. These vents now include two silicone gaskets.Features:90-degree ventSpecifications:Hose Size (inch): 5/8" inner diameterMaximum Hull Thickness (inch): 7/8

HD2000 Heavy Duty Bilge Pump - 24V & 2000 GPHHeavy-Duty Blige Pumps integrate the highest quality bearings, brushes, alloys, and magnets designed to withstand extreme usage cycles. The pump also employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Advanced resin compositions are incorporated in the exterior to resist chemicals such as engine oil, aggressive detergents, and hose plasticizers. Attwood’s Heavy Duty bilge has unsurpassed d

Tsunami MK2 Manual Bilge Pump - T500 - 500 GPH & 12VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service GPH (Gallons Per Hour): 50090° rotatable

Tsunami MK2 Manual Bilge Pump - T800 - 800 GPH & 12VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service GPH (Gallons Per Hour): 80090° rotatable

Tsunami MK2 Manual Bilge Pump - T800 - 800 GPH & 24VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service GPH (Gallons Per Hour): 80090° rotatable

Tsunami MK2 Manual Bilge Pump - T1200 - 1200 GPH & 12VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service GPH (Gallons Per Hour): 120090° rotatab

Tsunami MK2 Manual Bilge Pump - T1200 - 1200 GPH & 24VThe Tsunami Mk2 is the only manual bilge pump that eliminates airlocks. This is done by the Patented X-Air™ Impeller, which ejects trapped air in the pump and pipework. Also, the Tsunami Mk2 is the most reliable manual bilge pump in freshwater applications, considering it has 40% better protection against water ingress and electrolysis vs. the Mk1 pump.Easy Installation & Service GPH (Gallons Per Hour): 120090° rotatab

Tsunami T500 Recirq Aerator Kit - 500 GPHThe T500 Recirq Livewell Aerator Kit is recommended for fishing boats with built-in live wells that are not equipped with a thru-hull recirculation system. The pump is sealed and can occasionally be submerged; however, the electrical wires must never be submerged.Required For Installation:In-line fuse holder with 3-ampere fuseWaterproof wire butt-connectors for #16 AWG wireDrill with 1-1/16" (27 mm) or 1-1/8" (30 mm) hole sawPhillips head screwdriverBrow

Stainless Steel Thru-Hull Short Straight Barbed - 3/4" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction:Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistanceAll visible areas are polished to a mirror finish, then passivate each part for additional protectionThick steel sidewalls withstand continual stress

Stainless Steel Thru-Hull Short Straight Barbed - 1-1/2" Inner Diameter Polish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction:Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistanceAll visible areas are polished to a mirror finish, then passivate each part for additional protectionThick steel sidewalls withstand continual st

Stainless Steel Thru-Hull Standard Straight Barbed - 5/8" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction:Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistanceAll visible areas are polished to a mirror finish, then passivate each part for additional protectionThick steel sidewalls withstand continual st

Stainless Steel Thru-Hull Standard Straight Barbed - 1" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction:Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistanceAll visible areas are polished to a mirror finish, then passivate each part for additional protectionThick steel sidewalls withstand continual stres

Stainless Steel Thru-Hull Standard Straight Barbed - 1-1/8" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction:Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistance

Stainless Steel Thru-Hull Standard Straight Barbed - 1-1/2" Inner DiameterPolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction:Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistanceAll visible areas are polished to a mirror finish, then passivate each part for additional protectionThick steel sidewalls withstand continual s

Stainless Steel Scupper Valve Barbed - 1-1/2" Hose SizePolish your image with these beautiful, durable stainless steel fittings. Why specify plastic parts when these fittings will last the life of the boat?Rugged Stainless Construction:Cast from certified Enhanced 316 Stainless Steel alloy for strength and lifetime corrosion-resistanceAll visible areas are polished to a mirror finish, then passivate each part for additional protectionThick steel sidewalls withstand continual stress and hose fle

Universal Sprayless Connector - Male & FemaleSafely eliminate dangerous spraying of fuel when connecting or disconnecting pressurized hoses during fueling or maintenance. Comes complete with a thread-sealer for fast, easy installation; no additional supplies are required.Features:8838HF6 Female Hose Fitting and 8838TM6 Male Threaded Tank FittingPre-applied fuel-grade thread sealant prevents fuel leaksInclude check valves that automatically close upon disconnectingHigh fuel flow fitting (less

Universal Fuel Line Kit - 5/16" Diameter x 6' LengthThis EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 5/16-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. There’s also a multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance.F

Universal Fuel Line Kit - 3/8" Diameter x 6' Length with Sprayless ConnectorsThis EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your engine and provides the ultimate in performance, safety, and value. This kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Also, the kit includes an award-winning Universal Sprayless Connector (hose and tank fittings with pre-applied t

Universal Fuel Line Kit - 3/8" Diameter x 6' Length with Sprayless Connectors & Fuel Demand ValveThis EPA-certified Attwood Universal Fuel Line Kit reliably delivers fuel to your engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C. Award-winning Universal Sprayless Connector (hose and tank fittings with pre-applied thr

Mercury Fuel Line Kit - 3/8" Diameter x 6' Length (Pre-1998)This EPA-certified Attwood Mercury (Pre-1998) Fuel Line Kit reliably delivers fuel to your Pre-1998 Mercury engine and provides the ultimate in performance, safety, and value. The kit includes a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.Features:These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and en

Mercury Fuel Line Kit - 3/8" Dia. x 6' Length with Fuel Demand ValveThis EPA-certified Attwood Mercury Fuel Line Kit reliably delivers fuel to your Mercury engine and provides the ultimate in performance, safety, and value. The kit comes with a 6-foot-long, 3/8-inch diameter low-permeation fuel line that is designed to prevent kinking and hardening, and is rated up to 100 degrees C.Features:These Attwood Fittings Are Included: Tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end h

Yamaha Female Hose Fitting - Tank Or Engine End - 5/16" BarbThis Attwood hose fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. Barbed fitting fits 5/16" I.D. (Inner Diameter) hose and clamps are not included. Also, use thread sealant on all threads.Features:Yamaha fittingTank or Engine EndMaterial Construction: Acetal*Specifically mates to Attwood part number: 8897-6

Honda 3/8" Barb Female Hose Fitting - 90HP+This Attwood hose fitting is suitable for use with leaded, unleaded, ethanol-blended, and alcohol-blended fuels. The barb fitting fits 3/8" I.D. (Inner Diameter) hose. Clamps are not included and use thread sealant on all threads.Features:Honda fuel fittingDesigned for 90HP+ (Large Bore) Material Construction: Chrome-plated Brass*Specifically mates to Attwood part number: 8901-6

Zeus3 9" Multifunction Display with Insight ChartsUpdated Features:Advanced WindPlotC-MAP® Easy Routing and Navionics® Autorouting supportEasy-to-interpret C-MAP Navigation PaletteAdvanced WindPlot: provides users with a clearer view of wind trends, easier comparison of True Wind Speed (TWS) to True Wind Direction (TWD) and better display in small panels for use alongside charts, RacePanel or SailSteer features.C-MAP® Easy Routing and Navionics® Dock-to-Dock Autorouting: You will

Zeus3 12" Multifunction Display with Insight ChartsUpdated Features:Advanced WindPlotC-MAP® Easy Routing and Navionics® Autorouting supportEasy-to-interpret C-MAP Navigation PaletteAdvanced WindPlot: provides users with a clearer view of wind trends, easier comparison of True Wind Speed (TWS) to True Wind Direction (TWD) and better display in small panels for use alongside charts, RacePanel or SailSteer features.C-MAP® Easy Routing and Navionics® Dock-to-Dock Autorouting: You wil

Zeus3 16" Multifunction Display w/Insight ChartsUpdated Features:Advanced WindPlotC-MAP® Easy Routing and Navionics® Autorouting supportEasy-to-interpret C-MAP Navigation PaletteAdvanced WindPlot: provides users with a clearer view of wind trends, easier comparison of True Wind Speed (TWS) to True Wind Direction (TWD) and better display in small panels for use alongside charts, RacePanel or SailSteer features.C-MAP® Easy Routing and Navionics® Dock-to-Dock Autorouting: You will n

Hydraulic Ram Type 1 - 12VHigh power, efficient drive units for maximum power with minimum consumption Ram allows the Power Steer Mode on the Pilot to be used in case of manual steering failure Integrated hydraulic system: no external hoses, reservoirs, etc...

Suncover for Triton2 DisplayKeep your unit protected from the elements with this display cover.

N2K Wind Mast Cable 20M 20M (66 ft) NMEA2000 Wind vane cable (Micro-C male - Simnet) 

WS300 MHU Speed BearingReplacement wind speed bearing for WS300 series wind sensors.Features:Fits both WS310 and WS320

WS300 Wind Vane Assembly Spare Includes Mounting NutWind vane assembly spare for WS300 series wind sensors. Includes mounting nut. Features:Fits both WS310 and WS320Includes mounting nut

WS300 Series 20M Cable - 65'Features:Wired cable for WS310 65'20M

WS300 Series 35M Cable - 115'Features:Wired cable for WS310 115"35M

Wind Speed Cups for All ModelsWind speed cup spare for all models wind sensors. Includes mounting nut.

Vulcan 12R Combo - No Transducer - Includes C-MAP Discover ChartUpdated Features:C-MAP® Easy Routing and Navionics® Autorouting supportEasy-to-interpret C-MAP Navigation PaletteC-MAP® Easy Routing and Navionics® Dock-to-Dock Autorouting: You will navigate faster and easier with automatic route planning. Menu activated, the feature automatically plots the shortest and safest course based on a boat’s draft, beam and height, creating a route around a landmass and other fixed n

ZG100 GPS AntennaThe B & G ZG100 GPS antenna provides precise and dependable position data making it the perfect partner for B & G chartplotters and instrument systems.The highly accurate 10 Hz GPS gives a precise and smooth update of position information during acceleration and maneuvering, rapid signal acquisition, and consistent position accuracy augmented by secondary satellite systems like WAAS, EGNOS, MSAS, and Galileo. It is also QZSS-ready.Features:Highly accurate position10Hz up