Powder & Primer Storage; Holds 20 Variflame or 209 primers; Holds up to 170 grains of black powder.;Powder and Primer storage;Up to 170 grains;Up to 20 primers;Works with bullets up to .50 caliber

The CVA Paramount ELR Loading Tip features an extended ballistic tip which requires a loading tip with a deeper recess to ensure proper alignment and protect ballistic tip from being crushed during loading. The tip is milled out of brass to ensure the muzzleloader barrel does not get stratched while using the loading tip.

The CVA Palmsaver Ramrod is an aluminum ramrod which simplifies the process of cleaning and loading muzzleloaders. At the end of the rod is a special jag that is threaded. The Palmsaver attaches to the threaded jag and is configured to be left on the gun when firing.

The CVA Palmsaver Ramrod is an aluminum ramrod which simplifies the process of cleaning and loading muzzleloaders. At the end of the rod is a special jag that is threaded. The Palmsaver attaches to the threaded jag and is configured to be left on the gun when firing.

The CVA Palmsaver Ramrod is an aluminum ramrod which simplifies the process of cleaning and loading muzzleloaders. At the end of the rod is a special jag that is threaded. The Palmsaver attaches to the threaded jag and is configured to be left on the gun when firing.

The CVA QRBP Breech Plug is made for use with all loose powder and pelletized muzzleloading propellants. The QRBP makes removing your breech plug and cleaning your muzzleloader a simple process.

"Two-brush set designed for in-line rifle maintenance;Large brush for breech area cleaning;Small brush for breech plug clearing;Nylon bristles for effective

Two-inch cleaning patches are a perfect fit over a CVA cleaning jag.

Wire cleaning brush to loosen the toughest fouling.

Flexibility to bend without breaking. Three foot length for you to custom fit. 11/32” diameter. 10-32 threads.

Straight-through tube allows for loading powder and bullet in one fluid motion. Package of 3.

Quiet, non-abrasive, non-glare polymer. Short and long starter is recessed to fit over most bullets.

Our longer barreled muzzleloader where the LR stands for Long Range featuring 30" fluted premium Nitride stainless steel Bergara barrelmaking longer range shots a bit less difficult due to decreased drops. Features include quick-take down design for easy cleaning and compact transport, a carbon fiber Palm Saver ramrod, an adjustable comb for perfect eye-to-sight alignment with open sights, Dura sight Weaver/Picatinny rail, fast rifling twists for optimal performance with modern projectiles and p

Nylon Ramrod, 32" Long, Non-Abrasive Ramrod That Won't Be Affected By Water, Oil, Alcohol, Salt, Or Most acids.

This Citrus Scented Cleaning Solvent effectively removes Powder Fouling From Blackpowder Rifle bores And Breech areas. 12Oz. Spray Bottle Design To Eliminate spills.

Synthetic Polymer Black Barrel Ram Rod With Synthetic Palm Knob To Ease The Pressure On The Shooter's Hand. Threaded End For Multiple Ram Rod Accessories. For pushing Bullets, Cleaning Barrels, Or pulling Bullets From The Barrel.

A muzzleloading ramrod tip specially designed to protect the tip of the Hornady 50 cal Bore Driver ELD-X. This tip prevents damage to the ogive while seating the bullet.

Brass Primer Capper Designed To Hold Twelve 209 Primers. Has a Lanyard Loop And Can Be Used On Most In-Line Muzzleloaders.

White, round cotton cleaning patches. Packaged in a convenient zip-close bag. Great for use on all types of firearms.

An advanced formula solvent that helps clean fouling from your muzzleloader. An additional ingredient helps protect against rust allowing two steps in one.

The Traditions LED Bore Light is brighter and provides 500 hours of use. This tool makes it easy to inspect your bore and is an essential tool for all muzzleloader users. For .50 caliber muzzleloaders or larger.

Fits all 1851, 1860 and 1858 revolvers. Nipple pick attached to brass cap.

Wooden handle fits over ramrod to relieve pressure on your hand when loading projectiles.

Comfortable round-handle with aluminum short and long starter rods. Conveniently screws onto your ramrod to serve as an extension/palm saver. Fits .32 to .58 caliber. 10/32 threads on both ends.

Solid brass aligner specially designed to reduce bullet distortion during loading of sabot and conical bullets. 10/32 thread. For .50 cal.

Designed to utilize musket percussion caps for greater ignition. Not for use with the Thunder Dome Breech Plug.

Designed to utilize musket percussion caps for greater ignition. Not for use with the Thunder Dome Breech Plug.

The deep concave fire channel positions the ignition flame directly at the Pyrodex Pellet or loose powder. This two-part system must be used with the Thunder Nipples. Fits most Traditions bolt actions and Tracker models. Does not fit break-action models.

The Thunder Nipples use an 8mm thread that tapers at the end to lock into the Thunder Dome Breech Plug. This magnum ignition system assures you a torch-like flame to ignite the powder. When using the 209 adpater, you must use the magnum hammer. Magnum 209 adapter for use with 209 shotgun primers.

A unique knurled head requires no tools for easy removal in just 3 full rotations. It incorporates a built in 209 holder. The flat face and heavy duty O-ring provide reliable ignition and reduced blow back. The Accelerator Breech Plug fits Pursuit II, Pursuit Ultralight, Vortek, Vortek Ultralight, and Buckstalker Accelerator models.

Traditions Quick-T Ramrod Handle makes loading and reloading your rifle faster and easier. The Quick-T Ramrod Handle functions like a palm saver and t-handle all in one while the jag allows it to be used as a work or cleaning rod. This compact, lightweight accessory makes it easier to reload for a follow-up shot in the field and more comfortable to load your rifle when sighting in at the range. The Quick-T Ramrod Handle has a 10/32 threads and fits the ramrod on most muzzleloaders.

fluted barrel; VAPR 1:24"" twist;StrikerFire System - no external hammer;StrikerFire Button - Cock the gun by sliding the button forward until it locks;TAC2 Trigger System - 2 stage competition-style trigger;209 primer ignition"

"The Traditions Buckstalker XT is a compact

24 in fluted Cerakote barrel;Hardwood stock;Fiber optic sights

Round Knob Style Solid Hardwood And Brass Construction.