Description: 316 S.S. No saw needed to install cleats. Drill & Drop into place. No special socket lengths needed to affix nuts when installing locking nuts. Overall length - 6-3/4" Overall width - 1-1/4" Depth - -9/16" Cleat length - 6" Stud length - 1-7/8" Barb size - 3/4" Max rope dia. - 7/8"

Material: C.P. Brass Fastener: #10 (4) Flange: 6-1/8" x 4-3/8" Inside Diameter: 4" x 2-1/4"

Description: 4-1/2" pr. of 316 S.S. Bow Chocks Line Size - 1/2" Fastener - #10 (2) Weight - 8.0 oz.Material: 316 Stainless Steel

Description: 304 S.S. Anchor Roller - 11" Length For a 20' - 60' Boat.Dimensions: L: 11" W: 2-3/8"

Description: 304 S.S. Danforth/Fortress Anchor Roller - 16" Length. For a 16' - 20' Boat.Dimensions: L: 16" W: 3-1/2"

Description: 304 S.S. Anchor Tensioner. Anchor Size - Up to 90lb.Dimensions: L: 4-1/2" W: 1-1/2"

Material: 304 Stainless Steel Stock: 5/16" Eye Ring Diameter: 1"Thread Length: 1-3/8"Wall Plate Size: 3/4" x 2-1/4"

Description: 316 S.S. 1-1/2" Push-Up Hose Deck Fill - Diesel (Green) Angle - 90 degrees Chain - Yes Fastener - #10 (3)Flange: 3"Hose Size: 1-1/2"

Description: 316 S.S. 1-1/2" Push-Up Hose Deck Fill - Waste (Black) Angle - 90 degrees Chain - No Fastener - #10 (3)Flange: 3"Hose Size: 1-1/2"

316 S.S. 2" Push-Up Hose Deck Fill (Gas)

Description: Rectangular Base - Hose - 9/16" - Hole Size - 3/4" Material: C.P. Zamac Type: Straight

Description: Round Head Hose - 9/16" Hole Size - 3/4" Material: C.P. Brass Type: Straight WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Description: 316 S.S. Hose Deck Fill with Key Flange - 3" Hose - 1-1/2" Angle - 90 degrees Chain - Yes Fastener - #10 (3) Weight - 12.8 oz.Material: 316 Stainless Steel Type: Gas

Description: 304 S.S. Clamp-on Speed Knob. Fits standard Destroyer Wheels. Includes locking nut.

Stainless Steel Mini Compression HandleCompression handles reduce and eliminate noise and rattle from hatches when the boat is underway. The handle uses acompressed gasket to create a water-tight seal for compartments or hatches.One finger operationUse on smaller lids and hatchesOuter Diameter: 1-7/8"Cut-Out:1-1/2"Surface Depth: 1/8" - 1/2"Shaft Length: 1-3/4" - 1-7/8"

T-Handle Latch - Nylon Black/Black - Non-LockingFeatures:Threaded offset cam bar with set screw includedNeoprene O-RingShaft is 1-3/8" long unless otherwise notedSpecifications:Outer Diameter: 3"Cut-Out: 2-1/2"Surface Depth: 1/8" - 3/4"Fastener: Included

Slam LatchIncludes Striker PlateStainless SteelFlange:2-3/8"Depth:1-1/2"Fastener: Provided

Chain & Rope Deck PipeInner Diameter: 1-3/4"Flange: 4"Fastener:#10(4)Rope Size:Max 1" DiameterMaterial: Chrome Plated Brass

Lift Ring/CleatLength:7" (17.9cm)Eye Diameter: 1-1/2"(3.75cm)Max Load: 5,000lbsFastener:1/4"Material: 316 Stainless Steel

Aft Handrail StanchionTube Outer Diameter:7/8"Height:1-1/2" (Left)Fastener:#10(2)Material: 316 Stainless Steel*With 1/4-28 set screws, Part 6249 for fastening stanchion to deck

Aft Handrail StanchionTube Outer Diameter:7/8"Height:1-1/2" (Right)Fastener:#10(2)Material: 316 Stainless Steel*With 1/4-28 set screws, Part 6249 for fastening stanchion to deck

90° Handrail StanchionTube Outer Diameter:7/8"Height:1-1/2" Type: CenterFastener:#10(2)Material: 316 Stainless Steel

90° Handrail StanchionTube Outer Diameter:7/8"Height:1-1/2" Type: EndFastener:#10(2)Material: 316 Stainless Steel

Studded Hand RailLength:12"Stud Post:1-1/2" - Includes 1/4-20 StudMaterial: 304 Stainless Steel

Studded Hand RailLength:18"Stud Post:1-3/4" - Includes 1/4-20 StudMaterial: 304 Stainless Steel

4° Rectangular BaseTube Outer Diameter:1"Base: 3-1/2" x 3"Fastener: 1/4"(4)Material: 304 Stainless Steel* With 1/4-28 set screws, Part 6249

Door HingeSize:1-1/2" x 3"Fastener: #8(6)Material: 316 Stainless Steel

Shortside Door HingeSize:1-3/8" x 2-1/4"Fastener: #10(5)Material: Black Nylon

Concealed HingeSize:1-1/2" x 2-1/4"Fastener: #8(5)Material: 304 Stainless SteelOffset:3/8" x 1/2"

Standard Hatch HingeSize:2-5/8" x 3-1/8"Fastener: #10(7)Material: Polished Brass

Take-Apart HingeAllows engine boxes, hatches, etc. to be easily removed, or laid back completely when open for full access.Size:3-7/8" x 2-1/16"Fastener: #10(4)Material: Chrome Plated Brass

Take-Apart Hinge - LeftAllows engine boxes, hatches, etc. to be easily removed, or laid back completely when open for full access.Size:3-5/8" x 1-1/2"Fastener: #10(4)Material: 316 Stainless Steel

Take-Apart Hinge - RightAllows engine boxes, hatches, etc. to be easily removed, or laid back completely when open for full access.Size:3-5/8" x 1-1/2"Fastener: #10(4)Material: 316 Stainless Steel

Butt HingeLength:1-1/2"Width:1-3/8"Fastener:#10(4)Material: Black Nylon

Butt HingeLength:1-1/2"Width:1-1/4"Fastener:#8 FHMaterial: 304 Stainless Steel

Strap HingeLength:4"Width:1-1/8"Fastener:#8 FHMaterial: 304 Stainless Steel

Strap Hinge - PairLength:6"Width:1-1/8"Fastener:#10(6)Material: Chrome Plated Brass

T-Strap HingeLength:7-3/4"Width:3-7/8"Fastener:#12(8)Material: 316 Stainless Steel

Barrel BoltLength: 4"Fastener: #6(6)Material: Polished Brass

Cabin Door HookLength: 2"Fastener: #6(4)Material: Chrome Plated Brass*Hooks pre-drilled for #6 screwsWARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.