ALLEN CROSSBOW DECOCKING ARROWS

Allen a trusted manufacturer in Crossbow accessories has engineered a durable decocking fiberglass crossbow bolt used for discharging a crossbow. Designed to be fired into the ground or a foam target. Reusable but inspect carefully for damage. Engineered with an integral half moon nock and heavy enough to be used with most crossbows. Comes with a heavy metal blunt tip and contains 5 bolts per pack.

Designed To Pull arrows From High Density Targets. Includes Three Interchangeable grippers Sized To Fit Different Shaft diameters Of Both Crossbow And Compound arrows. In Addition, The Hunter Orange Handles Are notched To Create a Built In nock Tool.

Thump Decocking System

Heavy duty fiberglass shaft built for durability. Half moon nock and 24” length allows for use in any crossbow. Features an integrated steel tip to withstand repeated ground impacts.

The Allen Fletch Remover is the ideal tool for removing arrow fletching and glue residue quickly and efficiently. Safe on carbon, aluminum, wood, and fiberglass arrows. Includes two replaceable blades.

The shock absorbing EVAC Decelerators slide up the shaft at point of contact with the ground. This unique design allows for the safe discharge of the crossbow and eliminates the unnecessary waste of a good arrow.

De-cocking bolt designed for safe and controlled crossbow deactivation. Features a glow in the dark vane for correct fletch and nock track alignment. Weighs 500 grains. Single use 5 pack.

Smaller diameter, firm braided, highly durable Spectra covered release loop material. Approximate diameter 0.062”.

Smaller diameter, firm braided, highly durable Spectra covered release loop material. Approximate diameter 0.062”.

Smaller diameter, firm braided, highly durable Spectra covered release loop material. Approximate diameter 0.062”.

Nock point and peep tying thread constructed of 100 percent high tenacity nylon, bonded to improve abrasion resistance. Will not fray when cut. High strength and weather resistant.

Replacement nock receivers For The Bitzenburger Jig.

Replacement nock receivers For The Bitzenburger Jig.

Nock Receiver Allows You To Fletch Crossbow Bolts.

Wrench Is Made Of High Impact Plastic And accommodates 3 Or 4 Blade broadheads.

Tower fletching jig allows you to fletch all three vanes at once. Includes 7 sets of arms

Multi Use pliers Can remove nock sets, Install nock sets, Pre-Stretch D-Loop, And Will permanently Tighten D-Loop To String.

Weight Screw Wrench Designed For larger Diameter Target shafts That Allows The Archer To Change Or Stack Weight Screws To The points Without removing The points. Works On All Carbon Express Screws With a 3 mm Allen Hex.

Easton Adhesive Epoxy Insert Adhesive Pouch;Pack of 3;Ultimate strength bonding;Impact resistant for durability;Specially formulated for securing arrow inserts;Comprises Two Part Epoxy Resin

Aluminum Shaft Marked Every 1/2" From 22" To 34" Used To Measure Draw Length And Arrow Length.

Wrench for adding or removing weight screws.

L-Shape bow square attaches to the string below the nocking point.

T-Shape bow square attaches to the string above and below the nocking point.

Multi-pliers can be used to install and remove nock sets, and install d-loops.

Hex wrenches with short arm design for reaching into tight fitting screws. Perfect for working around sights and rests. Includes sizes 1/16”-1/4”.

Needle nose pliers can also be used to tighten d-loops or install nock sets.

Tough-but-flexible Elevation Archer ID tag is constructed of Tri-Tone molded PVC. Fits standard business cards, and clearly displays contact information.

Sharpener To Give Your broadheads The Ultimate Edge. Works equally Well On Knives. Made With Premium Grade Carbon.

Flat Montec Diamond Sharpening Stone Is 2" � 4" In Size And Comes With Vinyl carryIng Case.

FACT weight system wrench allows you to install or remove FACT weight screws while the points are installed in the arrow, offering ultimate customization and tuning. For micro diameter arrows.

Maintain your knives in the field to the exact angle you set with your Lansky Kit. Featuring the same four angles as the Lansky Controlled Angle System, 17, 20, 25 and 30 degree for the perfect portable sharpening accessory. The built-in ceramic polishing benchstone also allows the QuadSharp to be used as a fully functional, standalone sharpening solution.

This kit is loaded with a wide variety of screws, bolts, stabilizer studs, e-clips, bolt spacers, cam spacers and much more in a wide assortment of shapes and sizes. Whether at home or on the tournament trail, you never know when you might need that one replacement part that this kit can supply. Kit contains 310 pieces.

The LCA Fletching Glue is perfect for all types of fletching. Great for gluing vanes, feathers, points, inserts or bushings. The LCA glue dries fast, but dries soft, for a stronger hold and doesn't leave a white residue on your shaft after the glue dries.

The LCA Fletching Activator is great for prepping your arrows for fletching. You can spray your arrow shaft, before you fletch, and it will enhance the bond of the LCA Fletching glue to the arrow shaft. It also works great for cleaning the arrow shaft before you fletch in preparation for a perfect fletching job.

The Arrow Squaring Disc is a 120 grit replacement disc originally designed for the LCA Revolution Arrow Saw, but can mount to other shaft squares with a peel-and-stick design.

The Last Chance VMP Fletching Station holds all an archer's fletching tools in one area. It includes area for a fletching jig

The Last Chance Quick Clip is designed to hold the ends of strings and cables while you tuning your bow to keep them from unwinding. The unit can be mounted to your bow press using the magnet or universal clamp.

The Last Chance Double Bright Light is designed to be used when building arrows. It can be attached to a fletching jig or the edge of the table with the included clamp.