rotating blade at 10

Pair Of Teflon tapes Prevent Glue From sticking To Fletching Clamps. Eliminates scraping Glue Residue From Clamp. Enables faster Arrow Production And More Exact Fletch Placement.

The Swhacker HDX3 Can Handle Your Razor blades, broadheads, fillets Knives, Kitchen Knives, Butcher Knives, hatchets, machetes, Or Just About Anything Else With An Edge! Features: Utilizes Tungsten Carbide Bits That Are 91.3 HRC Hardness. Carbide Bits Are Mirror Polished With Diamond honed Cutting Edges. Completely Weather Proof! Made From Solid 6061 Aircraft Aluminum, using All Aluminum rivets! Requires No oiling Or Cleaning! Features Two broadhead Tip tighteners!

Prevents Bow From Being Drawn after Lock Is Installed, Available In Black.

Made In The USA, This Vise accepts Any Compound Bow, Swivels To Work On Any Bow From The Left Or Right Side And adjusts To Level Any Bow With The Accessories Left On.

Portable crossbow decocking system for most major brand crossbows. Five adjustments allow the device to fit different shaped risers. Slides into the cocked crossbow like an arrow and safely decocks the bow in seconds. Simply take off the safety, squeeze the trigger, and slowly loosen the handle.

Free Standing 15 Pound Rack Comes With Complete instructions And One Roll Of Freezer Paper. Spring Tension Holds Paper Tight Yielding a 20" � 18" Shooting Face. Used For Fine Tuning, checking Arrow Flight after Release, And determining Shaft Spine Stiffness.

Manufacturer: DOOSUNG Corporation Model: M117

The Dry Fire Pro M.A.S.A.N accessory accurately simulates the experience of a real string as opposed to a rubber tube. Finger shooters get the benefit of real string (not tubing), great string angles, the experience of a nock, and practicing hold drills until your arm falls off. Compound archers can easily tie a D-loop to the string for 1 step attachment of a mechanical release. Add a kisser button just like your bow for anchoring repetition.

Aluminum Shaft Marked Every 1/2" From 22" To 34" Used To Measure Draw Length And Arrow Length.

Wrench for adding or removing weight screws.

Fletches arrows or bolts larger than 20/64” outside diameter. Includes arms to fletch 2” vanes with a helical and arms to fletch vanes or feathers up to 5” with a slight offset. Fletches all three vanes or feathers at the same time.

Fletches arrows smaller than 20/64” outside diameter. Includes arms to fletch 2” vanes with a helical and arms to fletch vanes or feathers up to 5” with a slight offset. Fletches all three vanes or feathers at the same time.

Fletches arrows or bolts larger than 20/64” outside diameter with a slight offset. Works with vanes or feathers up to 5” in length. Fletches all three vanes or feathers at the same time.

Fletches arrows smaller than 20/64” outside diameter with a right helical. Works with vanes up to 2” in length. Fletches all three vanes at the same time.

Includes small folding allen wrench set, rail lube wax, arrow puller, broadhead wrench, and scope lens cleaning cloth packaged in a zippered cube case.

Broadhead wrench fits most broadhead designs. Useful for installing and removing screw-in broadheads.

Essential tool kit for the archery shop. Includes zippered case cube with the following: Folding Allen wrench set, nock tool, arrow puller, bowstring wax, serving material, d-loop rope, and broadhead wrench.

Pro shop tool kit packed in a zippered case cube. Includes the following: small and large folding Allen wrench set, nock tool, arrow puller, bowstring wax, serving material, d-loop rope, broadhead wrench, d-loop pliers, bow square, and arrow prep tool kit.

Kit provides everything you need to clean the interior of any arrow shaft for proper point or insert adhesion. Fits all size shafts from G diameter to 27 series.

Multi-pliers can be used to install and remove nock sets, and install d-loops.

All Aluminum Laser Tool With The following uses, Finding Center, Cam & Limb Alignment, Grip Torque, Arrow Tuning And Fletch Clearance, Training Tool And Practice Aid, Check Tool For The traveling Archer And It Now Has a Longer Windage Adjustment For Bow Cut Past Center.

Convenient, Safe And Accurate Tool For Measuring Draw Length. Lightweight Glass recurve Is Equipped With Fiberglass Arrow Attached To Bow String. Arrow Is Marked In 1" Increments For 20" To 33".

The Extinguisher arrow puller is designed to easily remove your arrows from a target. The Extractor can also be used to effectively turn off your Lumenoks.

This Universal squaring Tool Is Designed To Square The Insert End Of An Arrow Shaft To The Collar Of The Point Or Insert For greatly Improved Accuracy And broadhead Alignment/Flight. Designed To Work equAlly Well On Either Aluminum Or Carbon Arrow Shafts. Most Arrow Cut-Off saws Do Not Cut Arrows Squarely Due To Improper Set-Up And Cutting Wheel Wear. The �V� Shaped Slot accepts All Shaft diameters.

Sharpener To Give Your broadheads The Ultimate Edge. Works equally Well On Knives. Made With Premium Grade Carbon.

This Universal squaring Tool Is Designed To Square The Insert End Of An Arrow Shaft To The Collar Of The Point Or Insert For greatly Improved Accuracy And broadhead Alignment/Flight. Designed To Work equAlly Well On Either Aluminum Or Carbon Arrow Shafts. Most Arrow Cut-Off saws Do Not Cut Arrows Squarely Due To Improper Set-Up And Cutting Wheel Wear. The �V� Shaped Slot accepts All Shaft diameters.

Replacement clamps For The Grayling Fletching Jig.

Easy To Read 2" Face Goes From .001 To .250 increments. Easy Glide Roller Bearings Allow Accurate straightening. Removable Rolling Bearing Platform adjusts To Either End For Tip straightening.

The AroJac was specifically designed to pull arrows from the most stubborn targets including FITA butts, cold 3D targets, rubber mats, and even the occasional tree. The AroJac pulls the arrow straight out of the target eliminating unneeded twisting and bending of the arrow. The self-tightening jaws automatically adjust to fit a wide range of arrow sizes including small diameter arrows, crossbow bolts and large diameter target arrows.

Replacement nock Receiver For The Jo-Jan Mono & Multi Fletcher.

Designed For Fletching 2219 And 2117 Crossbow Bolts. Rubber O-Ring Design Allows Fletching Bolts Without nocks installed.

This 3-in-1 archery multitool features a built-in broadhead wrench, arrow nock turning slots and a kisser button gauge.

The K’Netix Velovise Nocking Pliers are designed to tighten and remove nocks and offer a comfortable grip.

Machined aluminum string level with 45 degree bubble.

Multi-purpose engineered vise that works with crossbows, compound bows, rifles, shotguns, AR style or any other firearm. Features a hands free automatic ball socket, 360 degree rotation with locking angle, non-marring contact pads and stainless steel and aluminum construction. Change vise head position without un-clamping bow or gun. Easy bench or countertop mounting with “C” clamp or bolts.

Maintain your knives in the field to the exact angle you set with your Lansky Kit. Featuring the same four angles as the Lansky Controlled Angle System, 17, 20, 25 and 30 degree for the perfect portable sharpening accessory. The built-in ceramic polishing benchstone also allows the QuadSharp to be used as a fully functional, standalone sharpening solution.

Digital grain scale features a durable and convenient touch screen, auto calibration and auto turn off after 60 seconds. Precise and accurate, measures up to 3000 grains. Perfect for weighing arrows, points, broadheads or vanes.

The Hand Scale 2 will not only read/lock on peak weight, but it’ll also read/lock on holding weight all while drawing your bow only one single time to achieve both readings. This scale is equipped with an LED digital display, a comfortable handle and a short attachment hook for a release type feel. This scale's max weight is 110lbs.

The Bow Scale 2 will not only read/lock on peak weight, but it’ll also read/lock on holding weight all while drawing your bow only one single time to achieve both readings. This scale’s equipped with an LED digital display, a reinforced welded ring plus a strong and durable steel hook which attaches to your D-Loop with ease. This scales max weight is 110lbs.