ALLEN CROSSBOW DECOCKING ARROWS

The 24-Inch, Heavy-Duty, Fiberglass Shaft Of The Crossbow Decocking Bolt By Allen gives The Utmost Durability. With An Integrated Steel Tip That withstands Repeated Ground impacts And The installed Half-Moon nock Fits Most Crossbows.

The molded-plastic lock protects your compound bow from dry fires by preventing it from being drawn. It’s adjustable to most limb dimensions, and fits most compound bows and crossbows. It’s also a great theft deterrent, and great for states that legally require bows to be secured when out of the field.

The shock absorbing EVAC Decelerators slide up the shaft at point of contact with the ground. This unique design allows for the safe discharge of the crossbow and eliminates the unnecessary waste of a good arrow.

De-cocking bolt designed for safe and controlled crossbow deactivation. Features a glow in the dark vane for correct fletch and nock track alignment. Weighs 500 grains. Single use 5 pack.

Smaller diameter, firm braided, highly durable Spectra covered release loop material. Approximate diameter 0.062”.

Nock Receiver Allows You To Fletch Crossbow Bolts.

Replacement nock receivers For The Bitzenburger Jig.

Replacement nock receivers For The Bitzenburger Jig.

Wrench Is Made Of High Impact Plastic And accommodates 3 Or 4 Blade broadheads.

Tower fletching jig allows you to fletch all three vanes at once. Includes 7 sets of arms

Use Bowmar�s Peep Tuner to keep your peep perfectly square on any bow string. This item is easy to install and adjust.

Easy to use design can make any size d-loop. Will not slip and will not interfere with loop knots.

Bow Square That Aids In Setting Your nockIng Point as Well as Setting The Tiler And checkIng The Brace Height Of Your Bow.

Multi Use pliers Can remove nock sets, Install nock sets, Pre-Stretch D-Loop, And Will permanently Tighten D-Loop To String.

Weight Screw Wrench Designed For larger Diameter Target shafts That Allows The Archer To Change Or Stack Weight Screws To The points Without removing The points. Works On All Carbon Express Screws With a 3 mm Allen Hex.

Use Tap Tool For Clearing Clogged Or Binding Insert Threads.

Easton Adhesive Epoxy Insert Adhesive Pouch;Pack of 3;Ultimate strength bonding;Impact resistant for durability;Specially formulated for securing arrow inserts;Comprises Two Part Epoxy Resin

L-Shape bow square attaches to the string below the nocking point.

T-Shape bow square attaches to the string above and below the nocking point.

Hex wrenches with short arm design for reaching into tight fitting screws. Perfect for working around sights and rests. Includes sizes 1/16”-1/4”.

Needle nose pliers can also be used to tighten d-loops or install nock sets.

Tough-but-flexible Elevation Archer ID tag is constructed of Tri-Tone molded PVC. Fits standard business cards, and clearly displays contact information.

Flat Montec Diamond Sharpening Stone Is 2" � 4" In Size And Comes With Vinyl carryIng Case.

FACT weight system wrench allows you to install or remove FACT weight screws while the points are installed in the arrow, offering ultimate customization and tuning. For micro diameter arrows.

Provides protection for your arrows or bolts while traveling. Adjustable in length from 24.5”-39.5” and includes arrow holder for 12 arrows.

The K’Netix Newton Bow Scale is designed to be used with most bow and crossbows. This scale maxes out at 220lbs and has a digital read out for easy use.

"A hand held digital scale with an Aluminum outer shell. 110 pound capacity. It features a ""letoff percentage"" reading for compound bows."

"A hand hanging digital scale with 200 pound capacity. Adaptable to a draw board. It features a ""letoff percentage"" reading for compound bows."

The Arrow Squaring Disc is a 120 grit replacement disc originally designed for the LCA Revolution Arrow Saw, but can mount to other shaft squares with a peel-and-stick design.

"The Last Chance Revolution Arrow Tuner allows an archer to square their arrow

The Last Chance VMP Fletching Station holds all an archer's fletching tools in one area. It includes area for a fletching jig

The Last Chance Quick Clip is designed to hold the ends of strings and cables while you tuning your bow to keep them from unwinding. The unit can be mounted to your bow press using the magnet or universal clamp.

The Last Chance Double Bright Light is designed to be used when building arrows. It can be attached to a fletching jig or the edge of the table with the included clamp.

This kit is loaded with a wide variety of screws, bolts, stabilizer studs, e-clips, bolt spacers, cam spacers and much more in a wide assortment of shapes and sizes. Whether at home or on the tournament trail, you never know when you might need that one replacement part that this kit can supply. Kit contains 310 pieces.

The LCA Fletching Glue is perfect for all types of fletching. Great for gluing vanes, feathers, points, inserts or bushings. The LCA glue dries fast, but dries soft, for a stronger hold and doesn't leave a white residue on your shaft after the glue dries.