Ec Clamp Boat Rod Holder 1 3/4" Blk

Manufacturer: Eagle Claw Model: 04100-003

Hi-Tech Tackle Clamp-on Rod Holder

Scotty 449 Clamp Mount Is The Fully Portable Mounting Option For All Scotty Post Mount Rod Holders. Featuring a 241 Combination Side/Deck Mount, The 449 Is Made From Super Tough Reinforced Nylon.

Scotty 253 Gimbal Mount Allows The Use Of All Scotty Post Mount Rod Holders For boats With Factory instAlled Flush Mounted Rod Holders. Fits 9"X1 1/2" Flush Mounts.

Heavy Duty Adjustable Rod HoldersFeatures an ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment. 180° vertical adjustment range for a variety of rod tip height settings. Use with casting rods and spinning rods.

Stainless Steel Flush Mount Rod Holder, Standard Series2" Diameter7.5" LengthAttwood stainless steel rod holders meet the need for the finest in finish, function and durability.Polished 316 grade stainless steel tube for corrosion-resistanceGasket Provides water seal around flangeOptional, U.V. resistant, Cover Cap/Gasket closes tube when not in useU.V. resistant polymer liner protects finish on rod or reelWARNING: This product can expose you to chemicals which are known to the State of Californ

Stainless Steel Flush Mount Rod Holder, Standard Series2" Diameter7.5" LengthAttwood stainless steel rod holders meet the need for the finest in finish, function and durability.Polished 316 grade stainless steel tube for corrosion-resistanceGasket Provides water seal around flangeOptional, U.V. resistant, Cover Cap/Gasket closes tube when not in useU.V. resistant polymer liner protects finish on rod or reelWARNING: This product can expose you to chemicals which are known to the State of Californ

Stainless Steel Flush Mount Rod Holder, Standard Series2" Diameter7.5" LengthAttwood stainless steel rod holders meet the need for the finest in finish, function and durability.Polished 316 grade stainless steel tube for corrosion-resistanceGasket Provides water seal around flangeOptional, U.V. resistant, Cover Cap/Gasket closes tube when not in useU.V. resistant polymer liner protects finish on rod or reel WARNING: This product can expose you to chemicals which are known to the State of Califor

Vertical Mount Rod HolderHolds 4 to 6 rodsMounts vertically in application to hold rods horizontallyMolded rubber inserts secure rod butt and tipHolds rod and reels in a crisscross manner, which allows storage of more rods in a smaller spaceResists UV raysWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Rod Storage HolderHolds up to 3 fishing rods. Closed-cell foam insert protects rod. Mounts vertically or horizontally. 8-3/4" L X 2-1/2" W.

Aluminum Clamp-On Rod Holder - Horizontal - 1.05" OD - Fits 3/4" PipeSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner a

Aluminum Clamp-On Rod Holder - Vertical - 1.315" OD - Fits 1" PipeSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and

Aluminum Clamp-On Rod Holder - Horizontal - 1.66" OD - Fits 1-1/4" PipeSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner

Aluminum Clamp-On Rod Holder - Vertical - 1.66" OD - Fits 1-1/4" PipeSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner a

Aluminum Clamp-On Rod Holder - Horizontal - 1.90" OD - Fits 1-1/2" PipeSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner

Aluminum Clamp-On Rod Holder - Vertical - 1.90" OD - Fits 1-1/2" PipeSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner a

Aluminum Clamp-On Rod Holder - Horizontal - 2.375" OD - Fits 2" PipeSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner an

Aluminum Clamp-On Rod Holder - Vertical - 2.375" OD - Fits 2" PipeSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and

Single Aluminum 5° Transom Mount Rod HolderThe perfect way to add rod holders to the transom area. Designed with outboard engine wells in mind. An ideal way to add rod holders to a seating station. These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tallgimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are

Outrigger Rod Holder with Liner & Strap - AluminumFeatures:Strong, Stylish and FunctionalIncludes Liner and StrapAluminum

Aluminum Horizontal Clamp-On Rod Holder 1-5/16" OD White Powdercoat with SleeveSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The tap

Aluminum Vertical Clamp-On Rod Holder 1-5/16" OD White Powdercoat with SleeveSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper

Aluminum Horizontal Clamp-On Rod Holder OD - White Powder Coated with SleeveC.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features:Style: HorizontalFits rails with 1.66" measured ODMade from Marine Grade AluminumWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to

Aluminum Vertical Clamp-On Rod Holder 1-27/32" OD White Powdercoat with SleeveSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The tape

Adjustable Mid Mount Rod Holder Aluminum 7/8" or 1" with Sleeve & Hex KeyThese rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features:Style: Adjustable Mid MountFits rails with 7/8" or 1" measured ODMade from Marine Grade AluminumWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more

Adjustable Mid Mount Rod Holder Aluminum 1.66" or 1-1/2" with Sleeve & Hex KeyThese rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features:Style: Adjustable Mid MountFits rails with 1.66" or 1-1/2" measured ODMade from Marine Grade AluminumWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm.

Adjustable Mid Mount Rod Holder - 7/8" or 1" OD - White Powder Coat Aluminum with Sleeve & Hex KeyC.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features:Style: Adjustable Mid MountFits rails with 7/8" or 1" measured ODMade from Marine Grade AluminumWARNING: This product can expose you to chemicals including di(2-ethyl

Adjustable Mid Mount Rod Holder - 1-1/4" or 1-5/16" OD - White Powder Coat Aluminum with Sleeve & Hex KeyC.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features:Style: Adjustable Mid MountFits rails with 1-1/4" or 1-5/16" measured ODMade from Marine Grade AluminumWARNING: This product can expose you to chemicals includ

Adjustable Mid Mount Rod Holder - 1.66" or 1-1/2" OD - White Powder Coat Aluminum with Sleeve & Hex KeyC.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features:Style: Adjustable Mid MountFits rails with 1.66" or 1-1/2" measured ODMade from Marine Grade AluminumWARNING: This product can expose you to chemicals including

FLUSH MOUNTStainless Steel Rod HoldersTough enough for heavy tackleMade of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place.Standard 70 Series models have a tube depth of

FLUSH MOUNTStainless Steel Rod HoldersTough enough for heavy tackleMade of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place.Standard 70 Series models have a tube depth of

FLUSH MOUNTStainless Steel Rod HoldersTough enough for heavy tackleMade of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place.Standard 70 Series models have a tube depth of

Stainless Steel Rod HoldersWith 1/2" Pipe Threaded Drain HoleThese larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods

Stainless Steel Rod HoldersWith 1/2" Pipe Threaded Drain HoleThese larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods

Stainless Steel Rod HoldersWith 1/2" Pipe Threaded Drain HoleThese larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods

Stainless SteelFlush MountSwivel Rod Holders80 Series15°10-1/2" Length1-7/8" IDSwivel base ideal for bent butt rod fishingSwivels to follow the fish without removing the rod from the rod holder. Great for tuna or other large fishCast 1-piece stainless steel swivel cupSuper smooth turning precision-machined 1/2" pivot with fine threadsWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth

Stainless SteelFlush MountSwivel Rod Holders80 Series30°10-1/2" Length1-7/8" IDSwivel base ideal for bent butt rod fishingSwivels to follow the fish without removing the rod from the rod holder. Great for tuna or other large fishCast 1-piece stainless steel swivel cupSuper smooth turning precision-machined 1/2" pivot with fine threadsWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth

White Nylon Rod Holder 55120ACorrosion Free Nylon rod HolderThese 30° light duty fishing rod holders are an economical way to add more rod storage. Molded in one piece from UV resistant Nylon, these rod holders are tough and corrosion free. 10" tube. Cap is 4" long x 3-1/2" wide. Installs into a 2-1/16" hole. Mount with 3/16" screws(not included)

Pontoon Square Rail Adjustable Clamp On Rod HolderAll the same great features as the 304L stainless adustable clamp-on (55105A) with a clamp made to fir the square rails found on pontoon boats. Each rod holder comes with 2 protective liners, one to fit 1" and one to fit 1-1/4" square rail. The liners are round on the outside allowing the rod holder to be adjusted to any angle above the water, and the hidden left or right adjustment allows even more adjustment choices. Our clamp fits 1" to 1-1/