Scotty 477 Rocket Launcher Rod Holder Comes With 244 Flush Mount. Tilts Up And Down, including Upright For Rod Storage When travelling. Less missed Strike opportunities. Rocket Launcher Inside Diameter: 1.70". All Post Mount Scotty Rod Holders Are Fully Adjustable Up And Down, Rotating 360 degrees. Bolting Dimensions: 1 5/16" X 3 3/16".

Scotty 478 Rocket Launcher Rod Holder Comes With 344 Flush Mount. Tilts Up And Down, including Upright For Rod Storage When travelling. Less missed Strike opportunities. Rocket Launcher Inside Diameter: 1.70". All Post Mount Scotty Rod Holders Are Fully Adjustable Up And Down, Rotating 360 degrees. Bolting Dimensions: 1 5/16" X 3 3/16".

Scotty 479 Is The Scotty 470 Rocket Launcher Rod Holder Without Mount. Tilts Up And Down, including Upright For Rod Storage When travelling. Less mIssed Strike opportunities. Rocket Launcher Inside Diameter: 1.70". All Post Mount Scotty Rod Holders Are Fully Adjustable Up And Down, Rotating 360 degrees. Bolting Dimensions: 1 5/16" X 3 3/16".

Scotty 279 Bait Caster/Spinning Rod Holder Without Mount Holds a Bait Caster Reel In a cushioned Cradle. A Slot In The Front Of The Rod Holder Allows For a Spinning Reel To Be Securely Held In Position. The Rod Holder Design Has a Side Mounted Flange, Which Leaves The Bottom Open - This Allows For The Rod Holder To Accommodate Trigger Grips. Pistol Grip Rod butts Easily Clear The Sides Of The Rod Holder For Quick Rod Retrieval. Rod Can Be Secured In Holder With a Soft Latching Strap Which snaps

Scotty 280 Black Bait Caster/Spinning Rod Holder With 241 Combination Side/Deck Mount Holds a Bait Caster Reel In a cushioned Cradle. A Slot In The Front Of The Rod Holder Allows For a Spinning Reel To Be Securely Held In Position. The Rod Holder Design Has a Side Mounted Flange, Which Leaves The Bottom Open - This Allows For The Rod Holder To Accommodate Trigger Grips. Pistol Grip Rod butts Easily Clear The Sides Of The Rod Holder For Quick Rod Retrieval. Rod Can Be Secured In Holder With a So

Scotty 480 Is The Rocker Launcher Rod Holder With Gimbal Adapter.

Scotty 281 Bait Caster/Spinning Rod Holder With 244 Flush Deck Mount Holds a Bait Caster Reel In a cushioned Cradle. A Slot In The Front Of The Rod Holder Allows For a Spinning Reel To Be Securely Held In Position. The Rod Holder Design Has a Side Mounted Flange, Which Leaves The Bottom Open - This Allows For The Rod Holder To Accommodate Trigger Grips. Pistol Grip Rod butts Easily Clear The Sides Of The Rod Holder For Quick Rod Retrieval. Rod Can Be Secured In Holder With a Soft Latching Strap

Scotty 284 Black Baitcaster/Spinning Rod Holder Comes With 243 Square Rail Mount.

Scotty 1085 Strongarm Manual Downrigger Is The Heavy Duty Workhorse Of The Scotty Manual Lineup. Excellent For The Intermediate Size Boat. Is 30' Long, 1 1/4" Diameter Stainless Steel Boom And Has 200 ft Of preium 150 Lb Stainless Steel downrigger Cable. Comes With Boom mouted Rodmaster II Rod Holder And Power Grip Plus Line Release.

Scotty 388 Gear-Head Mount Kit Is Great For kayaks! Bring The Rod Closer And Snap It In Place With The Scotty Gear-Head Mount. Designed To Be a baItcaster/Spinning Rod Holder With 429 Extended Gear Head Adapter And 241L Side/Deck Locking Mounting Bracket In Black.

Scotty 389-Bk Baitcaster Rod Holder With 449 Clamp Mount Comes In Black.

Scotty 1091 Longarm 60" Telescoping Boom Combo Pack Is Ideal For Big boats. All The Deluxe features Plus The Pedestal Swivel Base. Features Include 36" - 60" Long, 1 1'4" Diameter Telescoping Stainless Steel Boom (collapses To 36" For Storage), 200 ft Of Premium 150 Lb Stainless Steel downrigger Cable, Boom Mounted Rodmaster II Rod Holder, 16 Position Swivel Pedestal Mount And a Power Grip Plus Line Release.

Scotty 272 Swivel FIshfinder Mount Is Sold separately And Works With Scotty Optional Rod Holder Mounts.

The Scotty 0241-GR Combination Side and Deck Mount allows for mounting on a flat surface or on the side of a gunnel or transom. It will work with all Scotty post mount rod holders. Please Note: This mount is not compatible with Scotty's No. 132 Mounting Rivets, however it is compatible with No. 133 Well Nut Mounting Kits.|.3|9|4|2.5|Dimensions: 4 inches x 2 inches x 2 inches; Bolting Dimension: 1 5/16 inches x 3 3/16 inches|Bolting Dimension: 1 5/16 inches x 3 3/16 inches; Box Dimension: 3 inche

The Scotty 0241-WH Combination Side and Deck Mount allows for mounting on a flat surface or on the side of a gunnel or transom. It will work with all Scotty post mount rod holders. Please Note: This mount is not compatible with Scotty's No. 132 Mounting Rivets, however it is compatible with No. 133 Well Nut Mounting Kits.|.3|9|4|2.5|Dimensions: 4 inches x 2 inches x 2 inches|Bolting Dimension: 1 5/16 inches x 3 3/16 inches; Box Dimension: 3 inches H x 4 inches W x 9 inches L|Not compatible with

The Scotty 0250 Rodmaster Rod Holder with Combination Side/Deck Mount is an original 8 inch tube style holder that accommodates any rod and reel combination including large rod butt tips. Fibre reinforced engineering grade nylon offers strength, resilience and reliability. It includes the 241 Combination Side/Deck Mount and can be mounted on top or side of gunnel. All post mount Scotty Rod Holders are fully adjustable up and down and with 360 degrees of horizontal rotation. This rod holder is de

The Scotty 0339-BK Power Lock Rod Holder with Clamp Mount is Scotty's most popular value priced, positive locking, open style rod holder. The universal cradle holds almost any rod and reel setup and has a front locking ring to prevent rod loss when traveling. Manufactured with fibre reinforced engineering grade nylon, the Power Lock offers strength, resilience and reliability. It includes a 449 Clamp Mount making this a fully portable and non-permanent solution for small boats. This rod holder i

The new Viking Solutions Truck Bed/Wall Mount Rod Rack gives you a easily transportable rod rack for carrying your rods in a truck bed, but also hangs on your wall with a supplied ?z channel. ? The rack is all-aluminum, stainless construction, with flared ends on the rod tubes for easy insertion and rod protection. This rod rack features 10 rod tubes, adjustable rod angles for transport, and attaches via supplied cam-buckle straps to the truck bed tie-downs. Rods can face either forward or rear

The Viking Floor/Deck Rod Rack allows up to 22 rod and reel combos to be stored in your home or out on your fishing deck. It's light weight lets you move it with ease. Durable powder coat finish will last for years ? full 2 year . The simple design makes for quick and easy (one-time) assembly.|20.1|6.5|32.5|6.3|Up to 22-rod storage rack that easily moves to another location if desired|Powder-coated finish lasts for years; quality design and construction|Easy one-time assembly (usually less than

Stainless Steel Flush Mount Rod Holder, Standard Series2" Diameter7.5" LengthAttwood stainless steel rod holders meet the need for the finest in finish, function and durability.Polished 316 grade stainless steel tube for corrosion-resistanceGasket Provides water seal around flangeOptional, U.V. resistant, Cover Cap/Gasket closes tube when not in useU.V. resistant polymer liner protects finish on rod or reelWARNING: This product can expose you to chemicals which are known to the State of Californ

Flush Mount Rod Holder - 30 Degree - Cast Bottom SeaVee VersionMade of 316 stainless steel, these flush mount gunnel rod holders feature an extra-large, low-profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal bar so the liner stays in place.

Flush Mount Rod Holder - 15 Degree - Cast Bottom SeaVee VersionMade of 316 stainless steel, these flush mount gunnel rod holders feature an extra-large, low-profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal bar so the liner stays in place.*Manufactured and labeled as a SeaVee product by C.E. Smi

Flush Mount Rod Holder -15 Degree - SeaVee VersionMade of 316 stainless steel, these flush mount gunnel rod holders feature an extra-large, low-profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal bar so the liner stays in place.*Manufactured and labeled as a SeaVee product by C.E. SmithTechnical S

Flush Mount Rod Holder -30 Degree - SeaVee VersionMade of 316 stainless steel, these flush mount gunnel rod holders feature an extra-large, low-profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal bar so the liner stays in place.*Manufactured and labeled as a SeaVee product by C.E. SmithTechnical S

Backing Plate f/70 Series Rod HoldersBacking plates are very important to have under every rod holder used for heavy tackle fishing. When the rod holder is under extreme load, regular nuts and washers can concentrate stress and cause spider cracking around your rod holders or perhaps even tear through causing severe gunnel damage. Smith backing plates distribute mounting bolt pressure evenly over 30 times more surface area than with standard washers alone. 2 sizes, one for 70 series and 80 serie

Backing Plate f/80 Series Rod HoldersBacking plates are very important to have under every rod holder used for heavy tackle fishing. When the rod holder is under extreme load, regular nuts and washers can concentrate stress and cause spider cracking around your rod holders or perhaps even tear through causing severe gunnel damage. Smith backing plates distribute mounting bolt pressure evenly over 30 times more surface area than with standard washers alone. 2 sizes, one for 70 series and 80 serie

FLUSH MOUNTStainless Steel Rod HoldersWith 1/2" Threaded DrainThese larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner

Replacement liner for 70 series in-gunnel rod holder, 9-5/8" long, cut to desired angle and length.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Replacement liner for 80 series in-gunnel rod holder, 11" long, cut to desired angle and length.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Deck Mount PlateThis adaptable 4" x 3" plate works with Cannon dual axis rod holders, pedestal mount tracks and downrigger pedestal mounts. Plates can be mounted in a variety of locations, and a protective mounting boot lets you avoid sharp edges.Includes mounting hardware

NEW - Innovative Trolling System Puts You In ControlNo matter how you fish - or what your fish for - you can customize our new trolling system to fit yout style. Our new rod holders feature a pistol grip design for one-handed adjustment of the rod angle and a ratcheting system for easy rod removal. Made of High-strength aluminum to withstand the punishment of big water use and can be changed out in a snap with our unique track system.Angled Rod HolderFixedAngled at 60°, with 90° of si

Allows rod holder to mount into the gunnel of the boat. Alignment key allows for 360 degree pivot while holding rod holder securely in place. Includes water-tight cap.

Extension Post f/Cannon Rod Holder - 2-PackFeatures:Extends height of rod holder by 6"Allows forward & backward pivot adjustment Alignment key allows for 360° pivot while holding post securely in place

Flush Mount Rod HolderRH-530 Large 30° Stainless SteelThe choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.

Swivel Base Rod HoldersRH570Stainless Steel Side Mount w/ Swivel BaseWithout a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are freque

Swivel Base Rod HoldersRH575XLStandard Angle 30° Stainless Steel Flush Mount w/ Swivel Base Extra LongThis holder is 4" longer than the standard length allowing the bent butt to sit deeper in the holder thus reducing the leverage and stress on the mounting surface.Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod hol

RH5160 Dedree Heavy Duty Vinyl Rubber Insert for RH515, RH532, CH110, RH532V, RH532VS/XS

Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Penn International 30Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.

Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Penn International 30VSW, 30TW, 30SWConstructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.

Rod Storage SystemsRod and Reel Hanger SetAnodized Finish: GoldFor: Penn International 50Constructed of Marine Grade Anodized Aluminum Bright Gold. Reel is attached to Hanger by spring loaded pins riding in bracket. Pins snap into harness lugs on top of reel. Reel cannot swing since it is held in upright position. Tip of Rod is placed into Locking End of set and the Nylon Ring is rotated to lock it in. Can be mounted Horizontally, Vertically or Overhead.