No. 1101 Depthpower Downrigger (30")Designed for heavy duty use, this unit will handle long hours and heavy weights in tough conditions.PRODUCT OVERVIEW: Fully adjustable decent speed, lifts 7 lb. weights at 235 ft./min. and 15 lb. weights at 203 ft./min.Spray protected positive-drive depth counter and Kevlar drive belt by Optibelt™250 ft. of 150 lb. Test, Stainless Steel Downrigger CableBoom mounted adjustable 358 Rodmaster II Rod HolderIncludes Sco

1026Pedestal Swivel MountGives full 360° rotation with 16 locking positions, quick fastening stainless steel mounting knobs for easy set-up and removalFits all Scotty downriggersDimensions: 5 1/2" x 5 1/2" x 3 5/8"Bolting Dimensions: 4 1/2" x 3 1/2"

102912" Gimbal MountFits into a boat's flush mount rod holder. Eliminates drilling holes and permanent mounting of downrigger brackets on boat. Made from welded stainless steel and modified nylon for the ultimate in strength and durability. For use with metal flush mount rod holders.Fits all Scotty downriggers and can be used with No. 1026 Pedestal Swivel MountDimensions: 6 1/8" x 7 1/8" x 12" x 1 3/4"WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to

StrikerDesigned for Muskie, Halibut, Sturgeon, and other big game fish. New stainless steel reinforced post, Larger opening with easy lock / unlock ring. The inner support rotates with the rod to instantly remove and "strike" simultaneously. 246Striker Rod Holder with No. 244 Flush Deck MountWARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Fly Rod HolderInnovative compact design, Allows hands free trolling with a fly rod. Fully adjustable and includes a safety strap. Includes No. 241 combination deck or side mounting bracket.WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

281 Bait Caster / Spinning Rod HolderHolds a bait caster reel in a cushioned cradle.A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in holder with a soft latching strap which snaps over the top.Includes

Rail Mount #1027Scotty's #1027 Rail Mounts fits up to 1-1/2" round rail, or oval-shaped wooden rails. It is easily installed and removed for storage. The wooden board (not included) transfers the downward pressure to the boat gunnel.Fits all Scotty downriggers and can be used with Scotty's #1026 Pedestal Swivel Mount.Dimensions: 6-1/8" x 7-1/8"WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more inform

254 Rod Holder Height Extender with Stainless Steel ShaftFeatures:Increase your odds with easier access to your rod and reelExtends the height of a rod holder by 8 1/2”Comes with stainless steel shaft for ultimate strengthWorks with all Scotty post-mount rod holdersWARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Dual Rod Holder24710" tube style rod holder. Gives you the ability to fish with 2 rods without mounting another rod holder. Designed for use with the No. 1026 Pedestal/Swivel Mount (Mounting hardware included).WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Swivel post bracket works with Scotty optional rod holder mounts.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Fully Adjustable rod holder with over 9" of stainless steel jacketed composite construction, accomodating all rods. Attaches to any Scotty Downrigger Boom.Main features:Heavy Duty Stainless SteelUnique Side or Deck Mounting Bracket with new Lock Down FeatureTilts up and down, including upright for rod storage when travellingLess missed strike opportunitiesSwivels 360 degreesLocks closed for travellingIncludes No. 244L Locking Flush Deck Mount.To use the new Scotty "lock-down" mount system simpl

Fully Adjustable rod holder with over 9" of stainless steel jacketed composite construction, accomodating all rods. Attaches to any Scotty Downrigger Boom.Main features:Heavy Duty Stainless SteelUnique Side or Deck Mounting Bracket with new Lock Down FeatureTilts up and down, including upright for rod storage when travellingLess missed strike opportunitiesSwivels 360 degreesLocks closed for travellingIncludes the No. 344 which has a sealed base for watertight applications(such as kayak decks) w

Fully Adjustable rod holder with over 9" of composite construction, accomodating all rods. Attaches to any Scotty Downrigger Boom.Main features:Unique Side or Deck Mounting Bracket with new Lock Down FeatureTilts up and down, including upright for rod storage when travellingLess missed strike opportunitiesSwivels 360 degreesLocks closed for travellingIncludes No. 244L Locking Flush Deck Mount.To use the new Scotty "lock-down" mount system simply choose the bestdirection to fish from and insert

Fully Adjustable rod holder with over 9" of composite construction, accomodating all rods. Attaches to any Scotty Downrigger Boom.Main features:Unique Side or Deck Mounting Bracket with new Lock Down FeatureTilts up and down, including upright for rod storage when travellingLess missed strike opportunitiesSwivels 360 degreesLocks closed for travellingIncludes the No. 344 which has a sealed base for watertight applications(such as kayak decks) with splash cover. For all Scotty post mount rod hol

Let's you use all Scotty rod holders with 3 1/2" wide track systems. Made with glass filled nylon. Fits Bert's, Trax Tech, etc. Stainless Steel fasteners included.WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Three Pole Rod Storage Rack - White These Three Pole Side Mount Rod Holder are constructed from one-piece of injection molded UV stabilized polypropylene. No assembly required, easy installation. Built-in knife, pliers, and lure holder. Accommodates rods up to 1-3/4” in diameter. 325038-1 and 325039-1 include four #8 stainless steel mounting screws.

Side Mount Rod Holder - White Constructed of injection molded polypropylene. These Side Mount Rod Holders have an integral, molded-in standoff located on the back of the rod holder, allowing direct mounting to any flat surface. Accommodates rods up to 1-3/4” in diameter. Installs with two #10 RH fasteners (not included).

Side Mount Rod Holder - 9" - Black Side Mount Rod Holders are constructed of injection molded polypropylene with 304 stainless steel mounting brackets. Accommodates rods up to 1-3/4” in diameter. Installs with four #8 RH fasteners (not included). 

Stamped Stainless Steel Rod Holder - 30° Economy Flush Mount Rod Holders are constructed of stamped 304 stainless steel with a plastic liner and mounting gasket. Features a 30° angle. Accommodates rods up to 1-1/2”. Installs with three #12 FH fasteners (not included).

Stylish 4-Rod Rack StorageBrushed aluminum finishOffered with 4-rod holdersHidden fastenersDesigned for light tackle spinning rod/reel combosSlotted to lock-in rods/reels

4-Rod Poly Rod Rack DeluxeDurable polyethylene to withstand the harsh marine environmentFlared rod holder for easy rod handlingSlotted rod holders lock in most conventional & spinning outfitsDeluxe racks feature convenient integrated slots for knife & pliers

4-Rod Poly Bungee RackIdeal for under-gunnel rod storageBungee securely stores rods on boardU.V. stabilized high-density polyethyleneEasy assemblyIncludes mounting backing plate and hardware for easy installation

Rod Rack Tote/Wall MountCarries up to 4 conventional rods & reelsCompact designEasy & light weightDurable polyethylene carrierMounts vertical or horizontal anywhere

Flared Weld-On Rod Holder 9-3/4"L x 1-3/4"ID - White Liner Polished Finish - 3/8" Coped BladeTaco Marine weld-on Aluminum rod holder is Brite Dip anodized for lasting protection and superior luster. Specially formulated, fungal-resistant PVC liners are tapered to fit snugly with flared rod holder design. Taco Marine Rod Holders with flared design allow for easy rod placement. Welded I-Beam pin construction seats rod butt securely in place and is proven to be 2-1/2 times stronger than competitive

Five Banger Aluminum Rod Holder - Straight ButtFeatures:Designed to increase your rod storage capacity from 1 to 5 and keep your fishing rods in easy reachConstructed of cold drawn high polished anodized aluminumTube ID 1-5/8" Base OD 1.49"

Five Banger Aluminum Rod Holder - Bent ButtFeatures:Designed to increase your rod storage capacity from 1 to 5 and keep your fishing rods in easy reachConstructed of cold drawn high polished anodized aluminumTube ID 1-5/8" Base OD 1.49"

Oval Head SS Gunnel Mount Rod Holder - 0° - 9"Crafted of 316 Stainless SteelHead Size: 3.28" x 4.06"Length: 9"Angle: 0° HeadInner Diameter: 1-5/8"

Round Head Closed Base Rod Holder - 15° - 9"Heavy duty, round head, closed end base with drain hole to accept 1/4" NPT pipe to hose fitting.Head Size: 3.85"Length: 9"Angle: 15° HeadInner Diameter: 1-5/8"

Blind Mount Round Head Swivel Base Rod Holder - 30° - 9"Eliminate fastening from the top of flange and enhance the look of your gunnelSwivel base is designed to be used primarily with bent butt tackleHead Size: 3.84"Length: 9"Angle: 30° HeadInner Diameter: 1-5/8"

Tigress Blind Mount Round Head Swivel Base Rod Holder - 15 - 9"

Oval Head Closed Base Rod Holder - 15° - 9"Heavy duty oval head closed end base, with drain hole to accept 1/4"NPT pipe to hose fittingHead Size: 3.28" x 4.06"Length: 9"Angle: 15° HeadInner Diameter: 1-5/8"

9" Swivel Side Mount Rod Holder - 1-5/8" I.D.316 Stainless Steel Designed for applications where clamp-on or flush mount holders are not practicalCan be mounted on any vertical flat surfaceWhite vinyl insert included to protect your rod

3/4"-1" Adjustable Clamp-On Rod HolderImproved version of the old standard rail mount rod holder316 stainless steel clamp mechanism with high polished stainless tubeWhite vinyl liner for rod protectionFits 3/4" and 1" rails9" x 2" OD baseRod holder ID 1-5/8"

4 Hole Swivel Rectangular Head Rod Holder - 0° - 10-1/2"Head Size: 4.25" x 4.75"Angle: 0° HeadLength: 10-1/2"Inner Diameter: 1-7/8"

4" Nylon Rod Holder ExtensionRod holder extenders used to shorten your rod holder to fit your bent butt fishing rodFits most medium and large rod holders and are 1.51" wide

Tigress Replacement Vinyl Insert - 15-9" - Black

Tigerfish Bat - 18"18" all aluminum construction with soft EVA foam grip

10' Safety Straps - PairBlack w/Tigress Logo

Black Plastic Cup Holder Insert w/SS Ring On TopMates with PCHE

SS Swivel Chair Gimbal Side MountMaximum strength and built to withstand the rigors of offshore fishing