EIC Relay ModuleFeatures:EIC Relay Module12V

Adjustable Electric Actuator for BOLTThis robust, water-tight black nylon adjustable actuator provides trouble-free operation for years to come.

Hydraulic to BOLT Electric Conversion KitFeatures:Quick and easy conversion from standard Bennett hydraulic single actuator systems (A1101A & A1101ARC) using your existing wiring, rocker switch and trim planesNo rewiring or drilling of new holes required"Plug 'n play" connection to your existing standard Bennett rocker switchEquipped with Auto Tab Retraction (Tabs retract when ignition is turned off) and a sophisticated diagnostics feature, greatly simplifying installation and trouble-shootingBe

EIC Wire Harness - 20'High quality wiring harness for Bennett Marine Trim Tab Electronic Indicator Kit.

1212ED Electric - Edge Mount Limited Space Trim Tab Kit - 12V12" x 12" Designed with an adjustable upper hinge for transoms with limited vertical space. Tabs turn up for added strength and feature piano-hinged backing plates.Kits Include:(2) 12-volt adjustable upper hinge actuators with 6' wire harnesses and waterproof connectors (BEA3000)(2) Stainless steel trim planes (tabs) and mounting plates(2) 20' wire harnesses with waterproof connectors (BAW2020)Features Include:Requires less than 6

AutoTrim Pro for Hydraulic Trim TabsFeatures:Easy-to-use, space saving keypad combining auto tab control, manual tab control, and tab position indicationManually or automatically levels the pitch of your boat and corrects any roll due to uneven loads or shifting weight

AutoTrim Pro for Electric Trim TabsIncluded diagnostics control unit

EIC Wire Harness - 40'High quality wiring harness for Bennett Marine Trim Tab Electronic Indicator Kit.

AutoTrim Pro Sensor KitThis kit adds tab position indication functionality to classic hydraulic systems currently without indication capabilities. AutoTrim Pro (ATP) requires the presence of actuator sensor wires in order to display trim tab position indication LEDs (although all other ATP features will function without sensors).

Dual Operation VSS (Voltage Sensitive Switch) 275A Cont MotorizedThese Voltage Sensitive Switches (VSS) automatically sense connected battery bank voltages and provide optimal, efficient charging of the second bank. The VSS allows for independent battery banks to be combined or isolated based on the presence of a charging source (such as an engine alternator or battery charger), while also offering remotely activated, high current, emergency parallel connection. Designed and constructed for lon

Pro Installer 400A Selector Battery Switch - MC10Power requirements on boats have increased, and these 2 Selector switches offer high power capacity (400 amps continuous), the ability to easily fit doubled cables, and conform to the industry standard mounting footprint (Guest, Perko, Blue Sea). Please note selector switches will not separate electronics from harmful engine starting spikes.SpecificationsMounting: Surface, Rear or FrontVoltage: 48v DC (for 12-48v systems)Rating: 400 Cont / 600 Int

Pro Installer 400A Selector w/Field Disconnect Battery Switch - MC10Power requirements on boats have increased, and these 2 Selector switches offer high power capacity (400 amps continuous), the ability to easily fit doubled cables, and conform to the industry standard mounting footprint (Guest, Perko, Blue Sea). Please note selector switches will not separate electronics from harmful engine starting spikes.SpecificationsMounting: Surface, Rear or FrontVoltage: 48v DC (for 12-48v systems)Rating:

Pro Installer 400A Dual Bank Control Switch - MC10Another addition to our multi award winning Pro Installer EZ Mount range, the innovative Dual Bank Control switch is like 3 switches in one, House, Start, and Emergency Parallel. Offering easy intuitive control for the boater, the Dual Bank Control switch features a unique isolated-On position which allows use of house loads and VHF radio if the engine needs to be electrically isolated, or allows the engine to be isolated during servicing while s

Mini Battery Selector SwitchThe 701S is the most compact selector switch available on the market. While BEP recommends isolated battery systems as outlined with our distribution clusters, the 701S provides a simple economical way of separating two batteries. BEP Marine Battery Switch Test Procedures (UL 1107) Continuous (1 hour), intermittent (5 minutes) and Cranking (engine starting - 10 seconds). The test is to determine the maximum current the switch can handle for the stated time, without th

Panel-Mounted Battery Master SwitchPanel-mounted switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution.Compact, lightweightRemovable keyCountersunk recesses for surface mount applicationStandard 2-1/16" (52 mm) hole cut out (same as standard gauge hole)Inside: captive inserts for 3/16" (4.8 mm) nuts providing full access for cables with no restrictionsStandard interchange label systemMolded in high temperature, fiber reinforced plast

Panel-Mounted Battery Mini Selector SwitchPanel-mounted switches are designed specifically for panel mount applications. This range gives a very compact, versatile solution.Compact, lightweightCountersunk recesses for surface mount applicationStandard 2-1/16" (52 mm) hole cut out (same as standard gauge hole)Inside: captive inserts for 3/16" (4.8 mm) nuts providing full access for cables with no restrictionsStandard interchange label systemMolded in high temperature, fiber reinforced plasticsWAR

Remote Operated Battery Switch, 275A ContThe MD range of battery switches allow you to install the battery switch very close to the battery, to remotely manage the increased electrical loads found on today's boats. This reduces cable lengths and sizes, providing significant savings in expense and weight of copper battery cable. They are ideal for remote isolation of bow and stern thrusters.Remote operationBattery switch can be mounted alongside battery, reducing cable lengths and cable sizes. (L

Remote Operated Battery Switch, 275A Cont - Deutsch PlugThe MD range of battery switches allow you to install the battery switch very close to the battery, to remotely manage the increased electrical loads found on today's boats. This reduces cable lengths and sizes, providing significant savings in expense and weight of copper battery cable. They are ideal for remote isolation of bow and stern thrusters.Remote operationBattery switch can be mounted alongside battery, reducing cable lengths and

Remote Operated Battery Switch w/Optical Sensor 500A 12/24VThe MD range of battery switches allow you to install the battery switch very close to the battery, to remotely manage the increased electrical loads found on today's boats. This reduces cable lengths and sizes, providing significant savings in expense and weight of copper battery cable. They are ideal for remote isolation of bow and stern thrusters. The 720-MDO has been enhanced to offer easy standard installation, or advanced options c

Remote On/Off Key Switch f/701-MD & 720-MDO Battery SwitchesThe remote On/Off key switch is used for the remote operation of the 701-MD and 720-MDO battery switches. It can be mounted stand alone or within the Contour Connect panel range.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Terminal Link Kit for 701-MD Size Battery SwitchesThe Terminal Link Kit (TLK) allows for cable connections to be made outside of the body of the switch.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Wireless Remote Control Kit f/701-MD & 720 Size Battery SwitchesWirelessly operate your BEP motorized battery switches from a distance of up to 250 feet (80 meters) away. Control up to 4 separate 5A circuits such as 701-MD/720-MDO battery switches, anchor light, navigation lights, and courtesy lights. No more lifting hatches to turn on battery switches - it is now all controlled from the remote key fob.Control battery switches easily (On/Off) from the dockRemote has a rolling code for securityWA

Piezo Buzzer, 30mm 5-30V 85DBEspecially suitable for use with the new 701-MDCZ CZone optimized motorized battery switch, this piezo buzzer is also useful wherever a single tone alarm is required.85 decibel output at 9 VoltsFrequency 3.5KHzVoltage 5-30 VoltsPower consumption 9mA at 12 VoltsWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more informa

Piezo Buzzer, 42mm 5-20V 97DBEspecially suitable for use with the new 701-MDCZ CZone optimized motorized battery switch, this piezo buzzer is also useful wherever a loud single tone alarm is required.97 decibel output at 9 VoltsFrequency 2.8 KHzVoltage 5-20 Volts (Suitable for use with 701-MDCZ battery switch) on 24 volt systems)Power consumption 12mA at 12 VoltsWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California

Replacement Key for 701This replacement knob replaces the existing knob for the 701 switch.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Emergency Parallel Battery Knob, Yellow Easy FitThis battery knob option for 701 Switches is for applications where emergency parallel switch needs to be highlighted.Order separatelyReplaces existing knobWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

500A 4 Stud Buss barPro Installer buss bars are designed for flexibility and scalability. The snap-out side skirts allow for additional cable entry, and radius ends improve cable routing options. it is easy to link other Pro Installer products to the buss bars because of the common interconnection height in the product line.Compact footprint saves spaceClear, polycarbonate covers insulate and protect on three sidesSecure cover attachment does not interfere with cablingSnap-out skirts for flexibl

Bus Bar HD 3 Stud 650A MC5Pro Installer buss bars are designed for flexibility and scalability. The snap-out side skirts allow for additional cable entry, and radius ends improve cable routing options. it is easy to link other Pro Installer products to the buss bars because of the common interconnection height in the product line.Compact footprint saves spaceClear, polycarbonate covers insulate and protect on three sidesSecure cover attachment does not interfere with cablingSnap-out skirts for f

Busbar HD 5 Stud 650A MC5Pro Installer buss bars are designed for flexibility and scalability. The snap-out side skirts allow for additional cable entry, and radius ends improve cable routing options. it is easy to link other Pro Installer products to the buss bars because of the common interconnection height in the product line.Compact footprint saves spaceClear, polycarbonate covers insulate and protect on three sidesSecure cover attachment does not interfere with cablingSnap-out skirts for fl

Busbar HD 8 Stud 650APro Installer buss bars are designed for flexibility and scalability. The snap-out side skirts allow for additional cable entry, and radius ends improve cable routing options. it is easy to link other Pro Installer products to the buss bars because of the common interconnection height in the product line.Compact footprint saves spaceClear, polycarbonate covers insulate and protect on three sidesSecure cover attachment does not interfere with cablingSnap-out skirts for flexib

200A Z Bar 10 Way Bus BarThis patent-pending, space saving bus bar range is a completely new concept for marine cable termination. Offering almost unlimited installation flexibility, the high and low level bars can be bussed together with Z-Link or used as separate positive/negative bars. Pro Installer Z-Bars are available in (10) way and (18) way 200 Amp Z-Bar models for a variety of onboard applications.Easily extend Z-Bars by placing on end or back-to-backClean installation-all cables can be

200A Z Bar 18 Way Bus BarThis patent-pending, space saving buss bar range is a completely new concept for marine cable termination. Offering almost unlimited installation flexibility, the high and low level bars can be bussed together with Z-Link or used as separate positive/negative bars. Easily extend Z-Bars by placing on end or back-to-backClean installation-all cables can be run from one side of the Z-barInnovative clear covers insulate and protect on three sides and offer easy accessWARNING

Fuse Holder ANL 300AProviding high-capacity fusing, fast response and very high interrupt ratings (ANL up to 6,000 Amps, Class-T up to 20,000 Amps), these fuse holders are ideal for protecting today's demanding onboard power electronics technology including inverters and battery chargers. They also protect wiring from short circuits. Pro Installer fuse holders' durable construction allow fuses to run at maximum load.Radiused ends improve cable routing optionsANL: for use with 5/16" (8mm) or 3/8"

Circuit Breaker Panel - 4-WayBEP Marine uses the highest quality materials in its range of Control Panels, from the marine grade aluminium base plates to the Airpax magnetic hydraulic circuit breakers.FeaturesMarine Grade powder coated aluminiumAirpax circuit breakerStylish Contour Design fasciaGreen LED backlit labelsRed LED indicates systems onPanels meet ABYC standardsSpecificationsTotal Positions: 4 LoadsCircuit Breakers: 1X 5A, 2X 10A, 1X 15ANominal Voltage: 12VMaximum Amperage: 80ADimensi

Panel 20SP DC12V DCSMDC circuit breaker panel with digital monitoringBEP Marine uses the highest quality materials in its range of ControlPanels, from the marine grade aluminium base plates to the Airpax magnetichydraulic circuit breakers.FeaturesMarine Grade powder coated aluminiumAirpax circuit breakerStylish Contour Design fasciaGreen LED backlit labelsRed LED indicates systems onPanels meet ABYC standardsSpecificationsTotal Positions: 20 LoadsCircuit Breakers: 5X 5A, 6X 10A, 7X 15A, 1X 20A,

Cruiser Series DC Circuit Breaker Panel with Digital Meters 32SP DC12VDC circuit breaker panel with digital monitoringBEP Marine uses the highest quality materials in its range of ControlPanels, from the marine grade aluminium base plates to the Airpax magnetichydraulic circuit breakers.FeaturesMarine Grade powder coated aluminiumAirpax circuit breakerStylish Contour Design fasciaGreen LED backlit labelsRed LED indicates systems onMimic Panel for quick reference of systems in operationBlank spac

Cruiser Series DC Circuit Breaker Panel with Digital Meters 36SP DC12VDC circuit breaker panel with digital monitoringBEP Marine uses the highest quality materials in its range of ControlPanels, from the marine grade aluminium base plates to the Airpax magnetichydraulic circuit breakers.FeaturesMarine Grade powder coated aluminiumAirpax circuit breakerStylish Contour Design fasciaGreen LED backlit labelsRed LED indicates systems onMimic Panel for quick reference of systems in operationBlank spac

AC Circuit Breaker Panel without Meters, 6 Way with Double Pole MainsIdeal for AC shore power installations and on board inverter installations.SpecificationsTotal Positions: 6 Loads + 1 InputCircuit Breakers: 3X 15A, 2X 20A, 1X 25A, 1X 30ANominal Voltage: 110V ACMaximum Amperage: 30ADimensions: 7.9" X 5" X 2.5"Neg Bus: IS-6MM-2WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or o

AC Circuit Breaker Panel without Meters, 4 Way Panel 2 Mains - 110VIdeal for AC shore power installations and on board inverter installations.Specifications:Nominal Voltage: 110V ACTotal Positions: 4 Loads + 2 InputsCircuit Breakers (Single + Double Pole): 2x 15A, 2x 20A, + 2x 30AMaximum Aperage: 30AH x W x 2.5": 4.5" x 9.4"Neg Bus: IS-6mm-2Label Sheet: 5WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to caus

AC Circuit Breaker Panel without Meters, 2DP AC230V Stainless SteelIdeal for AC shore power installations and on board inverter installations.SpecificationsTotal Positions: 2 InputsCircuit Breakers: 2X 15ANominal Voltage: 230V ACMaximum Amperage: 15ADimensions: 7.9" X 5" X 2.5"Neg Bus: IS-6MM-2WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more in