0183 to N2K Gateway with PC Interface, ISO The NGX-1 is an intelligent gateway that converts NMEA 0183 data to NMEA 2000 (and vice versa), allowing you to share information between devices from the two standards. This creates the possibility of upgrading some of the vessel’s electronics to NMEA 2000 and keeping the remaining NMEA 0183 devices. This can help spread the cost of transitioning to NMEA 2000, reducing the initial upgrade cost to accommodate a new NMEA 2000 device. The

Actisense Engine Management Unit Analog - Nmea2000

Micro 4-Way Instrument DropThe Actisense 4-way drop makes it easier to reach up to four devices with a single cable.Typically, when four devices need to be connected to an NMEA 2000 backbone, a T-piece and individual cable is required for each one. This can either mean excessive cabling demands or moving the backbone closer to your devices.The 4-way drop makes it possible to shorten the length of each cable needed before reaching a T-piece.

NMEA 2000® Rib Starter Kit An expandable solution for smaller boat users that wish to install an NMEA 2000 network.Installing small NMEA 2000 networks is quicker and easier than it’s ever been with this NMEA 2000 Starter Kit (A2K-KIT-3) from Actisense.The equivalent of four T-pieces in a single case provides a significant time and space saving with no more connecting multiple T-pieces together. Termination resistors are included and as they are removable, the network can be extended if

Multi-WAN 5 Source Programmable Gigabit RouterAigean’s Multi-WAN routers enable networks to switch between multiple internet sources without adversely affecting the onboard local network. Coupled with advanced features such as failover and smart switching, a vessel’s connection to the internet is more robust, secure, and faster than with a single-source configuration.Most modern vessels are equipped with multiple means of connecting to the internet, via ship-to-shore Wi-Fi, cellular

Furuno 10-Pin Mix & Match Cable for High or Medium Frequency CHIRP TransducersFeatures:10-PinFor High or Medium Frequency CHIRP Transducers

TM275C-LHW 1kW Chirp Transom Mount TransducerGet more coverage under your boat with Airmar’s unique wide beam, high frequency Chirp-ready transducers. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high frequency band results in superior resolution. The constant wide beamwidth provides twice the coverage under the boat and excellent fish arches on the display compared to most high frequency narrow beam transducer opti

Raymarine 11-Pin High or Med Mix & Match Transducer CHIRP Cable for CP470 Airmar MMC-11R CHIRP Mix and Match Transducer Cable 1M Raymarine 11-Pin.For use with Airmar's High or Med Single Band Mix and Match CHIRP transducers up to 1kW (1,000 watt).

TM165HW Chirp High Wide 600W Transom Mount Transducer - Requires Adapter CableReplacing a non-Chirp or single frequency transducer with the AIRMAR TM165HW (High Wide) 600W Chirp-ready transom mount transducer provides anglers with an inexpensive and easy performance upgrade to their current sonar systems. The TM165HW is legendary for producing the finest detail and largest coverage area of any transom mounted model in its class. The TM165HW is perfect for fishing boats up to 25 feet (8 mete

MM-8G Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short (2m) cable attached, plus an interchangeable longer (8m) brand-specific adapter cable.The short pigtail attached to the transducer ends in an Airmar 5-pin female connector. The adapter cables have a matching Airmar 5-pin male connector (shown below) at one end and the correct connector for a specific brand of electronics at the other end.Both parts are neede

Navico 9-Pin Dual Mix & Match Cable for Dual Element TransducersFor dual-socket Navico/Lowrance/Simrad xSonic 9-pin equipment Mix and Match Cables for CHIRP TransducersMany CHIRP transducers are now made as Mix and Match models. These versions have a common base transducer with an attached 9-meter cable, plus an interchangeable short (1-meter) brand-specific adapter cable.The permanently-attached 9-meter cable ends in an Airmar 12-pin connector. This cable is run up through the boat to the e

164WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings.You can use wrench 164WR-4 to brace the housing when using this wrench.For use with:B164SS164SS264

164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations.For use with:B164SS164B175CSS264

Deadrise Angle Finder - Accuracy of ± 1/2°Accurate to 1/2 of 1°, this precision instrument, with strong ceramic magnet is designed for attachment to a carpenter's square or straight edge to overcome time consuming computation of angles.Features:Quickly measures boat hull deadrise angle.Ball Bearing construction for accuracy.Attach to straight edge or framing squareHandy angle and grade chart on back of unit

Garmin 12-Pin Mix & Match Cable for Chirp TransducersAirmar's Garmin Mix & Match CableFeatures:12-PinSpecifically for Chirp Transducers

Garmin 8-Pin Mix & Match Chirp Cable - 1MAirmar's 8-Pin Mix & Match Chirp Cable specifically for Garmin.Features:8-PinLength: 1MChirp Cable

Navico 9-Pin Mix & Match Chirp Cable - 1MAirmar's 9-Pin Mix & Match Chirp Cable for NavicoFeatures:Length: 1M9-Pin

B175M Bronze Thru Hull 20° Tilt - 1kWRely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer deliver

B265LH Bronze Chirp Thru Hull 1kW with Fairing BlockRequires Mix and Match CableImagine knowing what exact frequencies work the best at detecting specific fish species: Bluefin Tuna—60 kHz, Squid—133 kHz, and Cod—175 kHz. Now imagine tuning your fish finder to these frequencies, marking the fish precisely on the screen, then catching them! With the B265 transducer connected to a tunable fish finder, you too can have a log book like a commercial fisherman. This powerhouse transd

B175M Bronze Thru Hull 0° Tilt - 1kWRequires Mix and Match CableRely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures.

B75M Bronze Chirp Thru Hull 12° Tilt - 600WRequires Mix and Match CableRely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater stru

B75M Bronze Chirp Thru Hull 20° Tilt - 600WRequires Mix and Match CableRely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater stru

Engine Cooling Pump for Kohler 4-6 Cylinder Diesel - 4-6.5kW Gas - 12.5 kW GasAlbin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines.For Engine Models:4-6 Cylinder Diesel4-6.5 kW Gas12.5 kW GasReplaces Pump:Kohler - 267373, 246489, 344089 (Impeller Kohler 229826)Sherwood - G907P (Impeller Sherwood 99

Engine Cooling Pump for KohlerAlbin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines.For Engine Models:N/AReplaces Pump:Kohler - GM46936, GM344371 (Impeller Kohler 229826)Sherwood - G910P (Impeller Sherwood 9959K)

Engine Cooling Pump for Kohler - 5EKD, 4EFKD, 7.5EKD, 6EFKD, 10EKD, & 8EFKDAlbin Pump Marine engine cooling seawater pumps follow standards regarding dimensions, interchangeability, and performance. The range consists of flange-mounted, belt-driven, and crankshaft pulley-driven pumps for the most common marine inboard engines.For Engine Models:5EKD, 4EFKD, 7.5EKD, 6EFKD, 10EKD, and 8EFKDReplaces Pump:Kohler - GM63535 (Impeller Kohler 359978)Sherwood - G8005 (Impeller Sherwood 8000K)

Ballast Pump FIP F4 12VDC 12V F4-size ballast pump with a capacity of 55 L/min (14.25 GMP). This pump is used for ballast pumping of water between tanks.Features:Pump body in brass, stainless steel shaft, premium ballast MC19 compound impeller, and seawater-resistant shaft sealSelf-priming up to a 3m vertical liftReversible flow direction25A fuse reversing16A normal dutyProtected against ignition by surrounding flammable gases, ISO 8846Replacement premium ballast impeller in MC19 compound, PN 06

Premium Impeller Kit 57 x 12.7 x 20mm - 12 Blade - Key InsertReplaces JMP 7110-01, Sherwood 10077K.Specifications:Weight: 0.085 kgDimensions: 57 mm x 12.7 mm x 20 mmType: Copolymer Neoprene Original MC BlendCertification: ISO 9001 Quality Guaranteed

DC Driven Circulation Pump with Brushless Motor - BL30CM 12VThis circulation pump is for the circulation of water/antifreeze in heating or cooling systems on boats, buses, motor homes, and commercial vehicles. There are many advantages to this pump, such as its small size with high efficiency, maintenance-free, ceramic shaft, carbon fiber sleeve, completely waterproof (IP68), brushless DC control, and long service life.Features: Motor brush-less magnetic isolated designFor continuous dutyLi

Boat Monitor System - 12/24VA boat positioning system that provides you with real time data to your smartphone or your computer such as battery status and positioning/tracking alarms if your boat is being moved.Easy to install, suitable for virtually any floating vessel with 12/24 V DC power onboard.Save on insurance cost by having an approved positioning system installed onboard.Features:SIM card that works with all international GSM communication standards with outstanding connectivity; option

Twinport Aerator Pump - 500 GPH - 12VTwinport cartridge aerator pump 12V with flowrate 32l/min (500GPH). The twinport makes it possible to use the same intake 19mm (3/4″) for both the livewell and wash down pump.Equipped with both straight and elbow 19mm (3/4″) detachable ports. Amperage 1,8A, fuse size 5A.

Twinport Aerator Pump - 1100 GPH - 12VTwinport cartridge aerator pump 12V with flowrate 75l/min (1100GPH). The twinport makes it possible to use the same intake for both the livewell and wash down pump.Equipped with straight fixed 29mm (1,15″) port. Amperage 4A, fuse size 5A.

Cartridge Aerator Pump - 500 GPS - 12V - AngledCartridge Aerator Pump 12V with flowrate 32l/min (500GPH) with angeled intake.Equipped with both straight and elbow 19mm (3/4″) detachable ports. Amperage 1,8A, fuse size 5A.Easy to install, maintain and to replace the cartridge.

Water Pressure Pump - 12V - 5.3 GPMPremium water pressure pump 12V with capacity 20l/min (5,3GPM). For continous supply of pressurized water on demand. Cut off pressure 2,8 bar (40 psi).Extra heavy duty sealed pressure switch, smooth and pulsation free flow, very quiet operation. Serve up to 5 outlets.Easy to install with quick connect ports for 1/2″ or 3/4″ hose, inlet strainer 40 mesh included. Fuse size 15A.

Wash Down Pump - 12V - 3.4 GPMPremium wash down pump 12V with capacity 12,9l/min (3,4GPM). For efficient deckwash or wash down duties. Cut off pressure 5bar (70psi).Easy to install with quick connect ports for 1/2″ hose, inlet strainer 40 mesh included. Fuse size 15A.

WPS/WD Inlet Strainer 40 MeshInlet strainer 40 mesh universal quick connect for WPS/ WD pump inlets. Protects the pump to ensure long service life and optimal performance.Easy regular manitainance by just opening the lid and cleaning the inside filter metal mesh.

Cartridge Bilge Pump Low 750GPH - 12VSubmersible low bilge pump 12V with pump capacity 50 L/min (750 GPH) and 42 L/min (660 GPH) at 0,9m (3ft) head. Stainless steel shaft, compact and easy to install.Tough thermoplastic ABS housing with detachable universal base plate with strainer and pin (for “T-slot”) to attach a level switch for automatic operation. Replaceable cartridge motor. Easy maintenance and low power consumption.Including 19 mm (3/4″) straight and elbow detachable d

Bilge Pump Heavy Duty 2250 GPH - 12VSubmersible heavy duty bilge pump 12V with pump capacity 140 L/min (2250 GPH) and 120 L/min (1900 GPH) at 1m head. Stainless steel shaft, double ball bearings, mechanical seal, tough thermoplastic ABS housing and a robust long-life motor design.Universal base plate with strainer and pin (for “T-slot”) to attach a level switch for automatic operation. Including check valve, 32mm (1,25″) and 38mm (1,5″) ports. 8A fuse.For pleasure or comm

Digital High Water Alarm - 12VThe 12V digital bilge sensor detects when there is water in the bilge or a tank. Field sensing digital technology, fully sealed without any moving parts.Will not corrode and are not affected by oil or debris.12V display panel, 1 LED and piezo alarm integrated, including 152mm (6″) wire leads, fuse and fuse holder.Features:Weight: 0.05 kg/1 lbElectronic SensorCE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio

Waste Water Diaphragm Pump 22L (5.8 GPM) - 12VSingle chamber, self priming, diaphragm pump 12V for grey or bilge water. Shower drain, transfer or pump out.Capacity 22 L/min (5,8 GPM), flexible installation with 360 degree rotational ports. Quiet operation and low power consumption. Operates with no need for filter.Including 19mm (3/4″) and 25mm (1″) straight connectors. 4,5A fuse. Interchangeable with Johnson Pump 10-13350-03.Features:Weight: 0.8 kg/1 lbDimensions: 141/5.5L x 105/4H

Digital Control Panel Silent Electric ToiletElectronic 3 function 12/24Vcontrol panel, before use, after use and short use plus a trimmer to regulate the flow rate. Features:Certification: CE marked 94/25/ECC, ISO8846 Small Craft, Electromagnetic compatibility 89/336/EEC, EN51014 1993/radio disturbance