DST810 Smart™ Multisensor 23kHz Bronze NMEA 2000® Transducer - N2KDepth, Speed-Through-Water, Water Temperature, Boat Attitude! The DST810 Smart Multisensor, featuring the new Gen2 paddlewheel and AIRMAR's CAST™ app, delivers a powerful combination of best-in-class speed performance and a simple, reliable way to calibrate accurate speed using your wireless device. The Gen2 paddlewheel delivers industry-leading start-up speed-through-water data below 0.3 knots and is linear at 0.

Transom Mounting Bracket for P66 Transducer - 2004 & up

60WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench.For use with:B60SS60

75WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on bronze and stainless steel housings. You can use wrench 75WR-4 to brace the housing when using this wrench.For use with:B75SS75

164WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings.You can use wrench 164WR-4 to brace the housing when using this wrench.For use with:B164SS164SS264

175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to facilitate tightening of the hull nut. Use wrench 164WR-2 or 164WR-3 for the hull nut.For use with:B164B175SS164SS264IMPORTANT: the design of the housing for these transducers changed slightly in June 2012. This wrench is for the newer design and has an internal width of 2-3/4". If you need a wrench for the older designs then use the 164WR-4 instead,

117WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations.For use with:B117B150B744VB744VLB765CSS555

60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations.For use with:SS60B60

75WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations.For use with:B75SS75

164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations.For use with:B164SS164B175CSS164

60WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations.For use with:B60SS60

75WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations.For use with:B75SS75

164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. They can easily be bent or modified to accommodate challenging installation locations.For use with:B164SS164B175CSS264

Airmar DT820BV-235-N2 235 kHz Low Profile Tilted Element™ Smart™ Sensor 20° Tilt Bronze NMEA 2000Airmar has taken its proven Tilted Element™ and broadband technologies and applied them to its leading line of Smart™ Sensors. The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA 2000® display. The DT800 operates at a frequency of 235 kHz and can run simultaneously with other Air

Deadrise Angle Finder - Accuracy of ± 1/2°Accurate to 1/2 of 1°, this precision instrument, with strong ceramic magnet is designed for attachment to a carpenter's square or straight edge to overcome time consuming computation of angles.Features:Quickly measures boat hull deadrise angle.Ball Bearing construction for accuracy.Attach to straight edge or framing squareHandy angle and grade chart on back of unit

P66 Transom Mount Transducer f/Humminbird 9-Pin UnitsFeatures:Depth and temperature in one housingPlastic kick-up bracketAccommodates transom angles between 2° and 20°Recessed waterflow channel protects paddlewheelTransducer can be removed from bracket without the use of tools for easy service and storageBoat Size: Up to 12M (40')Frequency: 50/200 kHzBeamwidth: 50 kHz-45°, 200 kHz-11°RMS Power: 600W10M CableFits: All 800, 900 & 1100 Series except 967 3D

B275C-LHW Bronze Thru-Hull - Low & High Wide FrequencyRequires Mix & Match CableGet more coverage under the boat with Airmar's wide beam CHIRP product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of CHIRP-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency CH

Garmin 12-Pin Mix & Match Cable for Chirp TransducersAirmar's Garmin Mix & Match CableFeatures:12-PinSpecifically for Chirp Transducers

Garmin 8-Pin Mix & Match Chirp Cable - 1MAirmar's 8-Pin Mix & Match Chirp Cable specifically for Garmin.Features:8-PinLength: 1MChirp Cable

Navico 9-Pin Mix & Match Chirp Cable - 1MAirmar's 9-Pin Mix & Match Chirp Cable for NavicoFeatures:Length: 1M9-Pin

Humminbird 9-Pin Mix & Match Chirp Cable - 1MAirmar's Mix & Match Chirp Cable for HumminbirdFeatures:Length: 1M9-Pin

B175HW Bronze Thru Hull 20° Tilt - 1kWRequires Mix and Match CableGet more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducer

B175M Bronze Thru Hull 20° Tilt - 1kWRely on Airmar’s new broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures. One transducer deliver

B265LH Bronze Chirp Thru Hull 1kW with Fairing BlockRequires Mix and Match CableImagine knowing what exact frequencies work the best at detecting specific fish species: Bluefin Tuna—60 kHz, Squid—133 kHz, and Cod—175 kHz. Now imagine tuning your fish finder to these frequencies, marking the fish precisely on the screen, then catching them! With the B265 transducer connected to a tunable fish finder, you too can have a log book like a commercial fisherman. This powerhouse transd

B175HW Bronze Thru Hull 12° Tilt - 1kWRequires Mix and Match CableGet more coverage under the boat with Airmar's new wide beam Chirp product line. Offering a high frequency range of 150-250 kHz and a constant 25° beam width, these transducers are truly broadband at its best. In addition to improving the performance of Chirp-ready echosounders, anglers using the new wide beam transducers will achieve twice the coverage under the boat compared to our current high frequency Chirp transducer

B175M Bronze Thru Hull 12° Tilt - 1kWRequires Mix and Match CableRely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater structures

B75H Bronze Chirp Thru Hull 20° Tilt - 600WRequires Mix and Match CableRely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater stru

B75M Bronze Chirp Thru Hull 12° Tilt - 600WRequires Mix and Match CableRely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater stru

B75M Bronze Chirp Thru Hull 20° Tilt - 600WRequires Mix and Match CableRely on Airmar’s broadband transducers for your ultimate fishing mission. Whether you’re a commercial fisherman, charter captain, or tournament angler, there’s a new game in town! Chirp transducers enable bottom detection down to 3,000m (10,000’) with 5 to 10 times greater detail and resolution so precise it’s possible to distinguish between individual baitfish, game fish, and underwater stru

DT800 NMEA 2000 Thru-Hull Tilted Element Smart Sensor - 20°Function: Depth / Temperature, Material: Plastic, Fixed Tilt Angle: 20°Frequency: 235 kHz, Cone: 12°, Power: 100 Watts RMSConnector: 5-Pin NMEA 2000Features:Low-profile, retractable, thru-hull transducer offers depth and temperature functions in a single, compact housingTilted Element Transducer – unique design tilts ceramic element inside transducer housing, giving all the advantages of a fairing block without a hull p

WS2-C06 NMEA 2000 Cable for Heading Sensor WeatherWith NMEA 2000 output only. End in a standard male 5-Pin NMEA 2000 connector 6M cable.6M/20'

Furuno 10-Pin Mix & Match Cable for High or Medium Frequency CHIRP TransducersFeatures:10-PinFor High or Medium Frequency CHIRP Transducers

TM275C-LHW 1kW Chirp Transom Mount TransducerGet more coverage under your boat with Airmar’s unique wide beam, high frequency Chirp-ready transducers. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high frequency band results in superior resolution. The constant wide beamwidth provides twice the coverage under the boat and excellent fish arches on the display compared to most high frequency narrow beam transducer opti

Raymarine 11-Pin High or Med Mix & Match Transducer CHIRP Cable for CP470 Airmar MMC-11R CHIRP Mix and Match Transducer Cable 1M Raymarine 11-Pin.For use with Airmar's High or Med Single Band Mix and Match CHIRP transducers up to 1kW (1,000 watt).

TM165HW Chirp High Wide 600W Transom Mount Transducer - Requires Adapter CableReplacing a non-Chirp or single frequency transducer with the AIRMAR TM165HW (High Wide) 600W Chirp-ready transom mount transducer provides anglers with an inexpensive and easy performance upgrade to their current sonar systems. The TM165HW is legendary for producing the finest detail and largest coverage area of any transom mounted model in its class. The TM165HW is perfect for fishing boats up to 25 feet (8 mete

Navico 9-Pin Dual Mix & Match Cable for Dual Element TransducersFor dual-socket Navico/Lowrance/Simrad xSonic 9-pin equipment Mix and Match Cables for CHIRP TransducersMany CHIRP transducers are now made as Mix and Match models. These versions have a common base transducer with an attached 9-meter cable, plus an interchangeable short (1-meter) brand-specific adapter cable.The permanently-attached 9-meter cable ends in an Airmar 12-pin connector. This cable is run up through the boat to the e

DT812PV-235-N2 - 235kHz - Plastic Thru Hull Smart Sensor - 12° Tilt - NMEA 2000 - 6M CableAirmar has taken its proven Tilted Element™ and broadband technologies and applied them to its leading line of Smart™ Sensors. The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA 2000® display. The DT800 operates at a frequency of 235 kHz and can run simultaneously with other Airmar 50/200 kHz t

Furuno 12-Pin Mix & Match Cable for CHIRP Dual Element TransducersFor use with Airmar's Mix and Match CHIRP transducers up to 1kW (1,000 watts).This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

DST810 Plastic Smart Sensor 235kHz - NMEA 2000 - BluetoothDepth, Speed-Through-Water, Water Temperature, Boat AttitudeFor a product to be considered a “breakthrough,” it has to vastly change conventional behavior and enhance abilities. The  DST810 Smart Multisensor, together with Airmar's CAST™ App, is the convergence of advanced hull data, matched with a simple and reliable way to calibrate accurate speed via a wireless device. This changes how boaters receive and delive

Gobius Pro 1 External Fluid Level SensorInstall, make settings, and see the results on your smartphone. Free App for iPhone and Android phones included. You can use Gobius Pro for all liquids and tank materials. 12 – 24 Volts. Choose water, fuel, waste, or other fluids. You can have max 9 sensors/tank. Features:Measuring from the outside of the tank, nothing on the insideBluetooth and App for your phone includedWorks with the following tank materials:Stainless steel, max 3 mmSteel, ma