Genoa Car - Fits 25mm (1") T TrackFeatures a precision-turned Ertalyte sheave, through-bolted for extra strength. The positive action plunger mechanism has an easy-grip knobA popular range of Genoa cars and sliders designed to run on a 25mm (1") 'T' track. All are manufactured from high-quality marine grade aluminum with our unique 'Spectro' grey anodized finish for added protection.Features:'Spectro' grey anodized finishAnodized and supplied in metric lengthsThe stainless steel plunger stops wi

Genoa Car - Fits 20mm (3/4") T TrackFeatures a precision-turned Ertalyte sheave, through-bolted for extra strength. The positive action plunger mechanism has an easy-grip knobA popular range of Genoa cars and sliders designed to run on a 20mm (3/4") 'T' track. All are manufactured from high-quality marine grade aluminum with our unique 'Spectro' grey anodized finish for added protection.Features:'Spectro' grey anodized finishAnodized and supplied in metric lengthsThe stainless steel plunger stop

Extra Large Wincher PairThe Barton Wincher is a specially designed rubber molding that converts your standard winch into a self-tailing winch.  This tried and tested design has been a firm favorite with Sailors for many years.The Wincher works by gripping the rope when the drum is fully loaded and under tension, peeling off the line from the underside of the Wincher as you winch to give a true self-tailing motion.Cleating is achieved by locking the sheet into the Wincher’s ribbed cen

Large Wincher PairThe Barton Wincher is a specially designed rubber molding that converts your standard winch into a self-tailing winch.  This tried and tested design has been a firm favorite with Sailors for many years.The Wincher works by gripping the rope when the drum is fully loaded and under tension, peeling off the line from the underside of the Wincher as you winch to give a true self-tailing motion.Cleating is achieved by locking the sheet into the Wincher’s ribbed central gr

Medium Wincher PairThe Barton Wincher is a specially designed rubber molding that converts your standard winch into a self-tailing winch.  This tried and tested design has been a firm favorite with Sailors for many years.The Wincher works by gripping the rope when the drum is fully loaded and under tension, peeling off the line from the underside of the Wincher as you winch to give a true self-tailing motion.Cleating is achieved by locking the sheet into the Wincher’s ribbed central g

Small Wincher PairThe Barton Wincher is a specially designed rubber molding that converts your standard winch into a self-tailing winch.  This tried and tested design has been a firm favorite with Sailors for many years.The Wincher works by gripping the rope when the drum is fully loaded and under tension, peeling off the line from the underside of the Wincher as you winch to give a true self-tailing motion.Cleating is achieved by locking the sheet into the Wincher’s ribbed central gr

Ratchet Block - 55mmThe Barton Ratchet Block is designed to be used on mainsheet systems and spinnaker sheets on dinghies and keelboats and for small yachts up to 30 feet.Combining high-performance engineering and contemporary design, the 2-3/16" (55 mm) ratchet block is the first in a planned range of sizes, it also offers a stainless steel lever that locks the swivel head if desired.The new Ratchet Block allows sailors to easily handhold loaded lines and offer a balance between holding power a

Siphon-Mate Siphon PumpSpecialty Transfer PumpSafety experts caution against the unsafe practice of siphoning petroleum by mouth, warning specially, that it can result in loss of life. Beckson's answer is the patented Siphon-Mate pump; a combination displacement lift pump and siphon pump with valves suitable for transferring fuel. Pump half strokes to start flow. Once flow begins, fully extending the handle will allow siphoning provided that the source is higher in elevation than the receptacle.

Thirsty-Mate Hand Pump with 20" HoseThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conducti

Thirsty-Mate Hand PumpThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Se

Thirsty-Mate Hand PumpThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Se

Thirsty-Mate Hand PumpThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Se

Thirsty-Mate Hand PumpThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Se

Thirsty-Mate Hand PumpThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Se

Handy-Mate Utility PumpBeckson's Handy-Mate pumps can be used around the home, car, RV or anywhere to handle routine and emergency pumping jobs. They are designed to handle all the routine pumping jobs, plus the unusual ones. They can pump water out of bilges, sump tanks and from one tank to another, or pump oil from inboard or stern drive or engine crankcases when it needs changing. A tube is provided to insert into the dipstick hole and the oil is quickly pumped out. The especially versatile 2

Thirsty-Mate Hand PumpThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Se

Thirsty-Mate Hand PumpThe Beckson THIRSTY-MATE hand pump is manufactured in the U.S.A. of the finest materials available. It is self-priming and very easy to clean. This hand pump will not rust or corrode or mar your boat. If your THIRSTY-MATE hand pump becomes clogged, simply remove the foot valve assembly and clean out the inside. Spare parts such as replacement foot valve assemblies and hoses are readily available.Features: Angled top sleeve Contoured red tee handle Non-conductive material Se

Flex-a-Pump Impossible Place PumpsA Thirsty-Mate with extra reach! This pump can be permanently installed and will operate in any position. It comes complete with mounting brackets, intake hose and clamp, strainer, check valve and discharge hose. Ideal for small boats, engine compartments and much more.Features: Diameter: 1-3/4" (44 mm) Length: 14" (35.6 cm) Stroke: 12" (30.5 cm) Gal/Min: 7.5 (28 L) Outlet Hose: 2' (61 cm) Intake Hose: 4' (1.2 m)WARNING: This product can expose you to chemi

Flex-a-Pump Impossible Place PumpsA Thirsty-Mate with extra reach! This pump can be permanently installed and will operate in any position. It comes complete with mounting brackets, intake hose and clamp, strainer, check valve and discharge hose. Ideal for small boats, engine compartments and much more.Features: Diameter: 1-3/4" (44 mm) Length: 14" (35.6 cm) Stroke: 12" (30.5 cm) Gal/Min: 7.5 (28 L) Outlet Hose: 2' (61 cm) Intake Hose: 6' (1.8 m)WARNING: This product can expose you to chemi

Canoe/Kayak PumpFeatures:Diameter: 1-3/4" Length: 18" Strokes per Gallon: 8 strokes Gallon per minute: 8 gallons Mounting clips sold separately WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Sea Kayak Pump w/Float-a-Pump SleeveDesigned specifically with the Sea-Kayaker in mind, this upgraded version of our popular Canoe Pump includes an aluminum reinforcing shaft which prevents the pump shaft from flexing in a rolling sea and won't affect a compass. A hose can be added for extended discharge. The installed Float-a-Pump provides positive flotation for pumps dropped overboard.Features:Diameter: 1-3/4" Length: 18" Strokes per Gallon: 8 strokes Gallon per minute: 8 gallons Mounting cli

Thirsty-Mate High Capacity Super PumpCoast Guard Approved for commercial useManufactured to exceed the original requirements of Coast Guard regulation No. 519C. The specifications of this regulation were later reduced when no hand pump other than Beckson's could pass the test requirements. Still "over built" to Beckson's higher standard. Length: 24" Diameter: 3" GPM: 22 Inlet Hose: 36" Outlet Hose: 120" WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp)

Intake Extension HoseDesigned to extend the intake reach of the 124, 136 and 300 series pumps. Use the intake hose to pump out hard to see or reach areas. Comes with bilge strainer to prevent clogging. Makes difficult pumping jobs easier.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Beckson Screw Type 1" Drain PlugScrew-type drain plug with patented self-cleaning thread design, O-ring, and super strength center retaining legs to secure the center while draining. Ideal installation for transom of personal watercraft, small boats, fish wells, coolers, ice chests, water tanks, etc. Part should be mounted in a 1" ID hole with two S/S fasteners and positioned with gap in thread at lowest point.

Beckson Screw Type 1" Drain PlugScrew-type drain plug with patented self-cleaning thread design, O-ring, and super strength center retaining legs to secure the center while draining. Ideal installation for transom of personal watercraft, small boats, fish wells, coolers, ice chests, water tanks, etc. Part should be mounted in a 1" ID hole with two S/S fasteners and positioned with gap in thread at lowest point.

Flush Mount HatchFeatures: 1/2 inch Closed Height Weather-Tight Seal Opens full 180 degrees Nothing to Snag Lines One Hand Operation Mounts Vertical or Horizontal UV Stabilized Material Invisible Fasteners Textured Non-Skid Surface O.D. 9-1/2" x 23-7/8" I.D. 6" x 20-1/2" Hole Cut: 6-3/4" x 20-7/8"

Flush Mount HatchFeatures: 1/2 inch Closed Height Weather-Tight Seal Opens full 180 degrees Nothing to Snag Lines One Hand Operation Mounts Vertical or Horizontal UV Stabilized Material Invisible Fasteners Textured Non-Skid Surface O.D. 10-3/4" x 14-3/4" I.D. 7-1/4" x 11-1/4" Hole Cut:7-7/8" x 11-3/4"

Flush Mount HatchFeatures: 1/2 inch Closed Height Weather-Tight Seal Opens full 180 degrees Nothing to Snag Lines One Hand Operation Mounts Vertical or Horizontal UV Stabilized Material Invisible Fasteners Textured Non-Skid Surface O.D. 14" x 24" I.D.10-1/2" x 20-3/8" Hole Cut: 11-1/8" x 20-7/8"

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartme

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compart

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartm

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removin

Screw-Out Deck PlateThe Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removin

Replacement Portlight Lens Only - 5" x 12" - SmokeReplacement lens only for Beckson Opening PortsFeatures:5" x 12"Smoke

4" x 14" Port GasketFeatures:Gasket for all PO414 Series PortsGasket only

Drain Port - 4" x 14" x 2"-Depth - White/Clear Rain Drain ports are designed for use where cabin sides are sloped, and other ports would collect rain and spray.The molded in Rain Drain™ channels drain while tipped as much as 40°. They resist clogging and are easy to clean.No water enters the boat when you open the port after a rain. Beckson plastic portlights have a long history of excellent service and superior design features.They feature no corrosion, no condensation, no

ShipMate Stainless Pick/Probe "Shortly" 5-1/2" - BlackShipmate's Stainless Steel Blade simply does not flex under normal use. It is the perfect hole starter and multi-purpose tool. Its special handle design fits almost everyone's hand size and is shaped to prevent accidental roll-off from benches. The handle is extruded from unbreakable plastic, for a lifetime of trouble-free service. Blade is tapered stainless steel and is 4 inches in length. Great gift idea that can last a lifetime.

6" High-Torque Access Plate - ClearBeckson screw-out access plates made their way in many different operating environments. The customers loved the durability and watertight seal, but after high pressure conditions the center needed help to be opened. Beckson designed this high torque center to overcome this problem. You still have the clarity and toughness of the standard center, but with deeper finger holes and a full pry channel to help sealing and unsealing the unit.

Pontoon PumpThe float pump, designed originally for pumping out seaplane pontoons, offers the standard features of a "Thirsty-Mate_" pump with the addition of a flexible foot and tapered collar that fits standard funnels in most pontoons. The foot is threaded to accept 1 1/4" (FH 1-1/4) wire-reinforced hose for those who want to extend the reach of their pump.Add a Float-A-Pump Sleeve (FPS-3R) to provide positive flotation in case the pump slips overboard. This bright red sleeve slides over the

Pontoon Pump Discharge Hose KitDraining water from aircraft pontoons and floats into a container is so much easier with Beckson’s Pontoon Pump Discharge Kit! Factory fitted with an extra long, 6" (15.2 cm) rigid dispensing spout, the hose fits securely into a five gallon or other large container for proper disposal of water. Specifications:Hose Length: 3' (.9M)